Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£187.52
The ABB DSE203NMB25A30 is a compact 3P+N electronic residual current circuit breaker with overcurrent protection (eRCBO) designed to provide reliable protection against overloads, short circuits and earth leakage faults. By integrating multiple protective functions into a single device, it simplifies panel design while improving electrical safety for commercial and industrial installations.
As part of ABB's DSE203N M electronic RCBO range, this model incorporates Type A residual current protection, a Type B tripping characteristic and an unswitched neutral. It is suitable for protecting individual three-phase circuits where low to moderate inrush currents are expected, including lighting, heating, control panels and electronic equipment.
With a rated current of 25 A, 30 mA residual current sensitivity and a 10 kA breaking capacity, the DSE203NMB25A30 delivers dependable circuit protection while helping minimise nuisance tripping and simplifying fault isolation.
The DSE203NMB25A30 continuously monitors both overcurrent and earth leakage conditions. If an overload, short circuit or earth fault is detected, the device disconnects the protected circuit quickly to minimise equipment damage and improve personnel safety. Electronic residual current sensing provides consistent performance for modern electrical installations.
Tick the specs you need, then view products that match.
| Poles | 3-pole + N | |
|---|---|---|
| Current | 25 A | |
| Phase | Three Phase | |
| Device Type | RCBO | |
| Trip Curve | B curve | |
| Residual Current | 30 mA | |
| RCD Type | Type A | |
| Function | 3P+N electronic residual current circuit breaker with overcurrent protection (eRCBO). | |
| Residual Current Type | Type A. | |
| Contact Configuration | 3 protected poles plus neutral (neutral unswitched). | |
| Protection Rating | Additional direct contact protection at 30 mA versions. | |
| Connection Type | Bottom power supply connection with left-positioned neutral terminals. | |
| Terminal Capacity | Busbar 10 mm², rigid conductors 1–25 mm², flexible conductors 1–16 mm². | |
| Electrical Endurance | 10,000 cycles. | |
| Mechanical Endurance | 20,000 cycles. | |
| Operating Characteristic | Instantaneous earth fault undelayed switch. |
It is a three-phase plus neutral electronic RCBO providing overload, short-circuit and Type A residual current protection.
The device has a rated current of 25 A.
The RCBO provides 30 mA Type A residual current protection against AC and pulsating DC earth leakage currents.
The DSE203NMB25A30 features a Type B tripping characteristic suitable for circuits with relatively low inrush currents.
The device has a rated short-circuit breaking capacity of 10 kA.
ABB DSE203N electronic RCBOs are trusted by electrical contractors, panel builders and industrial engineers for dependable protection, compact installation and compliance with modern low-voltage electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.