Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£187.52
The ABB DSE203NMB16A30 is a compact and dependable residual current circuit breaker with overcurrent protection (RCBO) for three-phase plus neutral electrical circuits. It combines overload, short-circuit and earth leakage protection in one DIN rail-mounted device, reducing the number of separate protective components required within a distribution board.
As part of the ABB DSE203N RCBO series, the DSE203NMB16A30 is designed for low-voltage commercial, industrial and building-services installations. Its combined protection functions help simplify panel design, installation, testing and fault diagnosis while providing dedicated protection for the connected circuit.
The DSE203NMB16A30 features a rated current of 16 A, a Type B tripping characteristic and a rated residual operating current of 30 mA. Its Type A residual current detection is designed to respond to sinusoidal AC and pulsating DC residual currents, making the RCBO suitable for circuits supplying lighting, electronic equipment, controls and other loads with relatively low starting currents.
An RCBO protects an electrical circuit against several common fault conditions. Its thermal protection responds to sustained overloads, while its magnetic mechanism provides rapid disconnection during short-circuit events. The residual current mechanism also monitors the balance of current flowing through the live conductors and neutral.
When leakage current flows to earth and reaches the specified operating threshold, the ABB DSE203NMB16A30 disconnects the protected circuit. Combining these functions in one device provides individual residual current protection and can reduce the likelihood of a fault unnecessarily interrupting unrelated circuits.
Type A residual current protection detects sinusoidal alternating residual currents and pulsating direct residual currents. This makes the DSE203NMB16A30 suitable for circuits containing electronic controls, switch-mode power supplies and other equipment that may generate pulsating DC leakage currents.
The Type B tripping characteristic is intended for circuits where high starting currents are not normally expected. It is commonly applied to resistive loads, lighting circuits, socket circuits, electronic equipment and control systems, subject to the requirements of the electrical installation design.
Tick the specs you need, then view products that match.
| Poles | 3-pole + N | |
|---|---|---|
| Current | 16 A | |
| Phase | Three Phase | |
| Device Type | RCBO | |
| Trip Curve | B curve | |
| Residual Current | 30 mA | |
| RCD Type | Type A | |
| Function | 3P+N electronic residual current circuit breaker with overcurrent protection (eRCBO). | |
| Residual Current Type | Type A, 30 mA for additional direct contact protection. | |
| Number of Poles | 3 poles plus unswitched neutral. | |
| Current Rating | 16 A nominal current (B16 variant). | |
| Connection | Bottom power supply connection with busbar, rigid (1–25 mm²), and flexible (1–16 mm²) terminals. | |
| Mechanical Endurance | 20,000 operating cycles. | |
| Electrical Endurance | 10,000 switching cycles. | |
| Operating Characteristic | Instantaneous tripping with undelayed earthing switch. | |
| Neutral Terminal Position | Left side. |
The ABB DSE203NMB16A30 is used to protect three-phase plus neutral electrical circuits against overloads, short circuits and earth leakage currents.
The DSE203NMB16A30 has a rated current of 16 A and a Type B overcurrent tripping characteristic.
The 30 mA value is the rated residual operating current. The RCBO disconnects the protected circuit when earth leakage reaches its operating threshold, providing additional protection against electric shock.
This RCBO uses Type A residual current protection, which detects sinusoidal AC and pulsating DC residual fault currents.
A Type B tripping characteristic is designed for circuits with relatively low inrush currents, including resistive loads, lighting, electronic equipment and control circuits.
ABB circuit protection devices are widely selected by electrical contractors, panel builders and industrial engineers for reliable protection, straightforward installation and dependable performance in modern low-voltage distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.