Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DSN201E C25 A30 electronic 1P+N RCBO with 25 A rated current, C tripping characteristic, Type A 30 mA residual current protection and 6 kA short-circuit capacity.
£131.46
The ABB DSN201E C25 A30 is a compact 1P+N electronic residual current circuit breaker with overcurrent protection (RCBO) designed to protect single-phase final circuits against overloads, short circuits and earth leakage faults. Combining residual current and overcurrent protection in a single one-module device provides comprehensive circuit protection while conserving valuable distribution-board space.
This DSN201E variant combines a 25 A rated current, C tripping characteristic, 30 mA residual current sensitivity and Type A residual current detection. Type A protection responds to sinusoidal alternating and pulsating DC residual currents, making the RCBO suitable for appropriately selected circuits containing modern electronic equipment.
With a 6 kA short-circuit capacity, 230/240 V AC rated operational voltage and switched neutral, the DSN201E C25 A30 provides space-efficient protection for residential, commercial and industrial installations. Its voltage-dependent electronic design, arbitrary supply connection and compact 17.8 mm single-module width support flexible integration into modern low-voltage distribution boards.
The ABB DSN201E C25 A30 combines the protective functions of a miniature circuit breaker and residual current device in a single compact unit. It protects the connected circuit against overload and short-circuit currents while monitoring the balance between phase and neutral currents to detect potentially hazardous leakage to earth.
Its Type A residual current characteristic responds to both sinusoidal alternating and pulsating DC residual currents. Combined with a 30 mA trip threshold, the DSN201E C25 A30 provides additional protection against direct contact and protection against indirect contact when correctly applied, while its C characteristic accommodates suitably selected loads with moderate starting or inrush currents.
| Series | DSN201E |
|---|---|
| ABB order code | 2TAZ264114R2254 |
| Product group | DSN201E RCBO |
| Product type | Electronic residual current circuit breaker with overcurrent protection (RCBO) |
| Number of poles | 1P+N |
| Protected poles | 1 |
| Neutral | Switched |
| Neutral terminal position | Left |
| Rated current | 25 A |
| Tripping characteristic | C |
| Residual current type | A |
| Rated residual operating current (IΔn) | 30 mA |
| Rated short-circuit capacity | 6 kA |
| Rated service short-circuit breaking capacity (Ics) | 6 kA |
| Rated residual breaking capacity (IΔm) | 3 kA |
| Rated operational voltage | 230/240 V AC |
| Rated frequency | 50–60 Hz |
| Test voltage | 160–264 V |
| Rated insulation voltage (Ui) | 500 V |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Dielectric test voltage | 2.5 kV |
| Energy limiting class | 3 |
| Operating characteristic | Instantaneous |
| Power loss | 4.1 W |
| Overvoltage category | III |
| Pollution degree | 2 |
| Electrical endurance | 10,000 operating cycles |
| Mechanical endurance | 20,000 operating cycles |
| Reference ambient temperature | 30 °C |
| Ambient operating temperature | -25 to +55 °C |
| Storage temperature | -25 to +70 °C |
| Housing protection rating | IP40 |
| Terminal protection rating | IP20 |
| Rigid conductor capacity | 1–25 mm² |
| Flexible conductor capacity | 1–16 mm² |
| Busbar capacity | up to 10 mm² |
| Terminal tightening torque | 1.2 Nm |
| Wire stripping length | 13 mm |
| Terminal type | Cage screw terminal |
| Power supply connection | Arbitrary |
| Mounting | DIN rail |
| Dimensions (H × D × W) | 86 × 70 × 17.8 mm |
| Width | 1 module |
| Product net weight | 0.119 kg |
| EAN | 6941593498451 |
| Standards | IEC 61009-1; IEC 61009-2-2; AS/NZS 61009.1 |
The ABB DSN201E C25 A30 is a 1P+N electronic RCBO combining overload and short-circuit protection with 30 mA Type A residual current protection in a compact single-module device.
The DSN201E C25 A30 has a rated current of 25 A and a C tripping characteristic, making it suitable for appropriately rated circuits that can experience moderate starting or inrush currents.
Type A residual current protection detects sinusoidal alternating residual currents as well as pulsating DC residual currents, making it suitable for appropriately selected circuits containing compatible electronic equipment.
The DSN201E C25 A30 has a rated residual operating current of 30 mA, providing additional residual current protection for suitably designed final circuits.
The DSN201E C25 A30 has a rated short-circuit capacity of 6 kA and should be selected and installed in accordance with the prospective fault current and applicable electrical installation requirements.
ABB DSN201E electronic RCBOs combine residual current, overload and short-circuit protection in a compact 1P+N format, providing space-efficient circuit protection for residential, commercial and industrial low-voltage electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.