Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DSN201E C32 AC30 is a compact 1P+N electronic RCBO combining 32 A C-curve overcurrent protection, 30 mA Type AC residual current protection and a 6 kA breaking capacity.
£125.75
The ABB DSN201E C32 AC30 is a compact 1P+N electronic residual current circuit breaker with overcurrent protection (RCBO), combining overload, short-circuit and residual current protection within a single modular device. Part of ABB’s DSN201E RCBO range, it provides space-efficient circuit protection for residential, commercial and industrial low-voltage installations.
This model has a 32 A rated current, C tripping characteristic and 30 mA Type AC residual current sensitivity. Its 6 kA breaking capacity provides short-circuit protection, while the C-curve characteristic is suitable for appropriately designed circuits that may experience moderate normal starting or inrush currents.
The DSN201E C32 AC30 uses a 1P+N configuration with switched neutral and occupies only one DIN module. Supply can be connected from either the top or bottom using cables or busbars, while ABB’s contact position indication, fail-safe cage terminals and compatibility with DSCC-series accessories support straightforward installation and circuit status monitoring.
The ABB DSN201E C32 AC30 combines miniature circuit breaker and residual current protection functions within one compact device. Its overcurrent protection responds to overloads and short circuits, while the Type AC residual current section detects sinusoidal alternating earth fault currents. With a rated residual operating current of 30 mA, the RCBO can provide additional protection against direct contact where required as part of a correctly designed electrical installation.
The 32 A C-curve characteristic makes this model suitable for appropriately designed circuits where moderate normal starting or inrush currents may occur. Its switched neutral, 6 kA breaking capacity, 17.8 mm width and flexible top-or-bottom supply arrangement make the DSN201E C32 AC30 a practical solution where combined circuit protection must be accommodated efficiently within a distribution board.
| Product group | DSN201E RCBO |
|---|---|
| Series | DSN201E |
| ABB order code | 2TAZ264111R2324 |
| Product type | Electronic RCBO |
| Number of poles | 1P+N |
| Neutral | Switched |
| Rated current | 32 A |
| Tripping characteristic | C |
| Residual current type | AC |
| Rated residual operating current | 30 mA |
| Breaking capacity | 6 kA |
| Operating principle | Voltage-dependent electronic RCBO |
| Electrical endurance | 10,000 cycles |
| Mechanical endurance | 20,000 cycles |
| Housing protection rating | IP40 |
| Terminal protection rating | IP20 |
| Ambient operating temperature | -25 to +55 °C |
| Storage temperature | -25 to +70 °C |
| Maximum flexible conductor section | 16 mm² |
| Maximum rigid conductor section | 25 mm² |
| Maximum busbar section | 10 mm² |
| Terminal tightening torque | 1.2 Nm |
| Wire stripping length | 13 mm |
| Mounting type | 35 mm DIN rail to EN 60715 |
| Mounting position | Vertical or horizontal |
| Supply connection | Top or bottom |
| Dimensions (H × D × W) | 86 × 70 × 17.8 mm |
| Weight | approx. 119 g |
| Standards | IEC 61009-1; IEC 61009-2-2; AS/NZS 61009.1 |
| EAN | 6941593498185 |
The ABB DSN201E C32 AC30 is a 1P+N electronic RCBO that combines overload, short-circuit and residual current protection for suitable residential, commercial and industrial low-voltage circuits.
The DSN201E C32 AC30 has a rated current of 32 A with a C tripping characteristic.
This model provides Type AC residual current protection with 30 mA sensitivity, designed to respond to sinusoidal alternating residual currents.
The DSN201E C32 AC30 has a 6 kA breaking capacity for short-circuit protection.
Yes. The DSN201E C32 AC30 allows the supply to be connected from either the top or bottom using cables or busbars, providing flexibility when configuring a distribution board.
ABB DSN201E RCBOs combine overload, short-circuit and residual current protection in a compact one-module format, with the DSN201E C32 AC30 providing 32 A C-curve protection, 30 mA Type AC residual current sensitivity and a 6 kA breaking capacity for suitable residential, commercial and industrial circuits.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.