Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DS202CRMB13A300 is a 2-pole Type A RCBO with a 13 A B-curve rating, 300 mA residual current sensitivity and 10 kA breaking capacity for combined overcurrent and earth fault protection.
£181.97
The ABB DS202CRMB13A300 is a compact and reliable 2-pole residual current circuit breaker with overcurrent protection (RCBO) designed to protect single-phase circuits against overloads, short circuits and residual earth fault currents. As part of the ABB DS202CR M series, it combines residual current and overcurrent protection within a space-saving two-module device for residential, commercial and industrial electrical distribution systems.
This Type A RCBO provides protection against sinusoidal alternating and pulsating DC residual currents, while its Type B tripping characteristic provides overcurrent protection suited to circuits with relatively low inrush currents. The integrated RCBO design simplifies distribution-board installation by combining functions that would otherwise require separate protective devices.
With a rated current of 13 A, a rated residual operating current of 300 mA and a 10 kA rated short-circuit breaking capacity, the DS202CRMB13A300 provides dependable circuit protection in a compact DIN-rail format. ABB order code 2CSR772140R3135 identifies this specific DS202CR M B13 Type A configuration.
RCBOs such as the ABB DS202CRMB13A300 combine miniature circuit breaker and residual current protection functions in a single device. The RCBO disconnects the protected circuit in response to overload or short-circuit conditions while also detecting residual earth fault currents, helping provide comprehensive protection from a compact modular component.
The DS202CR series is designed for end-user single-phase circuits in residential, commercial and industrial installations. Its Type A residual current characteristic responds to sinusoidal alternating and pulsating DC earth fault currents, while the Type B overcurrent characteristic is suited to circuits where relatively low magnetic trip thresholds are required.
| Series | DS202CR M |
|---|---|
| ABB order code | 2CSR772140R3135 |
| Product type | Residual current circuit breaker with overcurrent protection (RCBO) |
| Number of poles | 2 |
| Rated current | 13 A |
| Tripping characteristic | B |
| Residual current type | Type A |
| Rated residual operating current | 300 mA |
| Rated operating voltage | 230 V AC |
| Rated frequency | 50 Hz |
| Rated short-circuit breaking capacity | 10 kA |
| Rated service short-circuit breaking capacity | 7.5 kA |
| Rated insulation voltage | 440 V |
| Rated impulse withstand voltage | 4 kV |
| Protection rating | IP20 |
| Pollution degree | 3 |
| Operating temperature | -25 to +55 °C |
| Reference standards | IEC/EN 61009-1; IEC/EN 61009-2-1 |
| Mounting type | DIN rail |
| Module width | 2 modules |
| Dimensions (H × W × D) | 86 × 36 × 72 mm |
| Weight | approx. 0.22 kg |
The DS202CRMB13A300 protects single-phase electrical circuits against overloads, short circuits and residual earth fault currents in residential, commercial and industrial installations.
The ABB DS202CRMB13A300 has a rated current of 13 A and a Type B tripping characteristic.
The DS202CRMB13A300 has a rated residual operating current of 300 mA and uses Type A residual current detection.
The DS202CRMB13A300 has a rated short-circuit breaking capacity of 10 kA.
The RCBO is designed for DIN-rail mounting and occupies two modules in a compatible modular distribution board or enclosure.
ABB DS202CR RCBOs combine residual current and overcurrent protection in a compact two-module format, providing dependable protection for residential, commercial and industrial electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.