Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DS203NCB13A30 is a 13 A 3P+N Type B RCBO with 30 mA Type A residual-current protection and a 6 kA rated short-circuit breaking capacity for commercial and industrial three-phase circuits.
£164.87
The ABB DS203NCB13A30 is a compact 3P+N residual current circuit breaker with overcurrent protection (RCBO) designed to protect three-phase end-user circuits against overloads, short circuits and residual earth-fault currents. Part of the ABB DS203NC series, it combines residual-current and overcurrent protection within a single four-module device for efficient commercial and industrial electrical distribution.
This RCBO has a rated current of 13 A, a Type B tripping characteristic and a rated residual operating current of 30 mA. Its Type A residual-current characteristic detects sinusoidal alternating and pulsating DC residual currents, making it suitable for modern electrical circuits where these residual-current waveforms may occur.
With a rated short-circuit breaking capacity of 6 kA, the DS203NC B13 A30 provides integrated protection for three-phase plus neutral circuits. Its 30 mA residual-current sensitivity supports protection against indirect contact and additional protection against direct contact in suitable installations, while its compact four-module construction helps conserve distribution-board space.
The ABB DS203NCB13A30 combines overcurrent and residual-current protection within one modular device. Its overcurrent function protects against overload and short-circuit currents, while its Type A residual-current function detects sinusoidal alternating and pulsating DC earth-fault currents that can occur in modern electrical installations.
With a residual-current sensitivity of 30 mA, the DS203NCB13A30 supports protection against indirect contact and additional protection against direct contact where applicable. Its Type B tripping characteristic is suitable for appropriate circuits with relatively low inrush currents, while the compact four-module 3P+N construction provides comprehensive protection without requiring separate MCB and residual-current devices.
| Series | DS203NC |
|---|---|
| SKU | DS203NCB13A30 |
| ABB order code | 2CSR256140R1135 |
| Product group | DS200 / DSH200 RCBO |
| Product type | Residual current circuit breaker with overcurrent protection (RCBO) |
| Rated current | 13 A |
| Tripping characteristic | B |
| Rated residual operating current | 30 mA |
| Residual-current type | A |
| Number of poles | 4 (3P+N) |
| Number of protected poles | 3 |
| Rated short-circuit breaking capacity (Icn) | 6 kA |
| Rated insulation voltage (Ui) | 500 V |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Current limiting class | 3 |
| Operating characteristic | Undelayed |
| Overvoltage category | III |
| Pollution degree | 2 |
| Degree of protection | IP2X |
| Maximum conductor cross-section | 25 mm² |
| Operating temperature | -25 to +55 °C |
| Mounting type | DIN rail |
| Width | 4 modules / 71 mm |
| Installation depth | 69 mm |
| Weight | approx. 480 g |
| Standards | IEC/EN 61009-1, IEC/EN 61009-2-1 |
| Application | Commercial and industrial |
The ABB DS203NCB13A30 is a 3P+N RCBO designed to protect three-phase end-user circuits against overloads, short circuits and residual earth-fault currents.
The DS203NCB13A30 has a rated current of 13 A and uses a Type B tripping characteristic.
The device has a rated residual operating current of 30 mA and uses Type A residual-current detection for sinusoidal alternating and pulsating DC residual currents.
The DS203NCB13A30 has a rated short-circuit breaking capacity of 6 kA.
The ABB DS203NCB13A30 occupies four DIN-rail modules with a width of approximately 71 mm, integrating residual-current and overcurrent protection within one compact 3P+N device.
ABB DS203NC Type A residual current circuit breakers with overcurrent protection combine compact three-phase circuit protection with detection of sinusoidal AC and pulsating DC residual currents, providing integrated protection for modern commercial and industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.