Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CSF202201R3630 ABB F202 A S-63/0.3 RCCB 2P Type A Selective 300 mA 63 A
ABB F202 A S-63/0.3 is a 2-pole selective Type A F200 residual current circuit breaker rated at 63 A with 300 mA residual-current sensitivity for coordinated low-voltage electrical installations.
£180.70
Why Choose the ABB F202 A S-63/0.3 RCCB?
The ABB F202 A S-63/0.3 is a 2-pole Type A selective residual current circuit breaker (RCCB) from the ABB F200 series, designed to protect people and electrical installations against fault currents to earth. Supplied under ABB order code 2CSF202201R3630, it combines a rated current of 63 A with a rated residual operating current of 300 mA.
The S selective characteristic provides intentional time-delayed residual-current operation, making this RCCB suitable for coordinated installations where selectivity between upstream and downstream residual-current devices is required. As a Type A device, it responds to sinusoidal alternating residual currents and pulsating direct residual currents.
The F202 A S-63/0.3 is rated for 230 V operation, with a rated insulation voltage of 500 V, a rated impulse withstand voltage of 4 kV and a rated conditional short-circuit current of 10 kA when correctly coordinated with suitable backup protection. Its two-pole modular design is intended for DIN-rail installation in residential, commercial and industrial distribution equipment.
Key Advantages
- Selective Type S operation for coordinated residual-current protection.
- 63 A rated current for compatible low-voltage circuits.
- 300 mA rated residual current for appropriate earth-fault and installation-protection applications.
- Type A detection for sinusoidal AC and pulsating DC residual currents.
- 2-pole configuration for compatible single-phase installations.
- 10 kA conditional short-circuit current when used with suitable backup protection.
- Part of ABB's established F200 selective RCCB range.
Key Features
- ABB F202 A S-63/0.3 RCCB.
- 2 poles.
- 63 A rated current.
- 300 mA rated residual current.
- Type A residual-current characteristic.
- Selective Type S time-delayed operation.
- 230 V rated voltage.
- 500 V rated insulation voltage.
- DIN-rail mounting for modular distribution systems.
- ABB order code 2CSF202201R3630.
Selective Type A Residual-Current Protection
The S designation identifies the F202 A S-63/0.3 as a selective RCCB. Selective devices incorporate a time delay that can support discrimination between residual-current protective devices installed at different levels of a distribution system, helping an appropriate downstream device operate before an upstream selective RCCB when the installation is correctly coordinated.
Its Type A characteristic provides protection against sinusoidal alternating and pulsating direct residual currents, while the 300 mA sensitivity is suited to appropriate earth-fault and installation-protection duties rather than the lower sensitivities commonly used for additional personal protection. The F202 A S-63/0.3 is an RCCB and does not provide integral overload or short-circuit protection, so suitable overcurrent protection must be provided separately.
Typical Applications
- Selective residual-current protection in distribution systems.
- Upstream residual-current protection for coordinated installations.
- Residential main distribution equipment.
- Commercial electrical distribution systems.
- Industrial low-voltage installations.
- Circuits containing loads capable of producing pulsating DC residual currents.
- DIN-rail distribution and control panels.
Technical Specifications
| Product group | F200 / FH200 RCCB |
|---|---|
| Series | F200 |
| Order code | 2CSF202201R3630 |
| Product type | Selective Residual Current Circuit Breaker (RCCB) |
| Number of poles | 2 |
| Rated current (In) | 63 A |
| Rated residual current (IΔn) | 300 mA |
| Residual current type | Type A |
| Residual-current detection | Sinusoidal alternating and pulsating direct residual currents |
| Operating characteristic | Selective Type S |
| Rated voltage | 230 V |
| Rated operational voltage | up to 277 V AC |
| Rated insulation voltage (Ui) | 500 V |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Rated conditional short-circuit current (Inc) | 10 kA |
| Mounting | DIN rail |
| Weight | approx. 0.225 kg |
| Pack unit | 1/6 |
| Standards | IEC/EN 61008; UL 1053 |
| EAN / GTIN | 8012542784401 |
Frequently Asked Questions
What is the ABB F202 A S-63/0.3?
The ABB F202 A S-63/0.3 is a 2-pole Type A selective RCCB from the F200 series, rated at 63 A with a 300 mA rated residual current.
What does the S designation mean on the F202 A S-63/0.3?
The S denotes a selective, time-delayed RCCB. This characteristic is intended to support residual-current discrimination between appropriately coordinated upstream and downstream protective devices.
What residual currents can the ABB F202 A S-63/0.3 detect?
As a Type A RCCB, the F202 A S-63/0.3 is designed to respond to sinusoidal alternating residual currents and pulsating direct residual currents.
Does the ABB F202 A S-63/0.3 provide overload and short-circuit protection?
No. The F202 A S-63/0.3 is an RCCB without integral overcurrent protection, so suitable circuit-breaker or fuse protection must be provided separately according to the electrical installation design.
What is the ABB order code for the F202 A S-63/0.3?
The ABB order code is 2CSF202201R3630, and the product has EAN / GTIN 8012542784401.
ABB F200 Selective Type A Residual Current Protection
ABB F200 Type A selective RCCBs combine residual-current detection for sinusoidal alternating and pulsating direct fault currents with Type S time-delayed operation for appropriately coordinated residential, commercial and industrial distribution systems.
