Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CSF202101R3900 ABB F202 A-100/0.3 RCCB 2P Type A 300 mA 100 A
ABB F202 A-100/0.3 is an instantaneous 2-pole Type A F200 residual current circuit breaker rated at 100 A with 300 mA residual-current sensitivity for compatible residential, commercial and industrial low-voltage electrical installations.
£188.53
Why Choose the ABB F202 A-100/0.3 RCCB?
The ABB F202 A-100/0.3 is a 2-pole Type A residual current circuit breaker (RCCB) from the ABB F200 series, designed to protect people and electrical installations against fault currents to earth. Supplied under ABB order code 2CSF202101R3900, it combines a high rated current of 100 A with a rated residual operating current of 300 mA.
As a Type A RCCB, the F202 A-100/0.3 is designed to respond to sinusoidal alternating residual currents and pulsating direct residual currents. This makes it suitable for compatible residential, commercial and industrial circuits containing modern electrical and electronic loads capable of producing these residual-current waveforms.
The F202 A-100/0.3 provides instantaneous operation, a rated voltage of 230 V and a rated frequency of 50–60 Hz. Its two-pole modular construction is designed for DIN-rail installation, while its 100 A current rating makes it suitable for higher-current residual-current protection applications.
Key Advantages
- 100 A rated current for higher-current compatible low-voltage circuits.
- 300 mA rated residual current for appropriate earth-fault and leakage-current protection applications.
- Type A detection for sinusoidal AC and pulsating DC residual currents.
- 2-pole configuration for compatible single-phase installations.
- Instantaneous operating characteristic without intentional time delay.
- Compact two-module DIN-rail format for modular distribution equipment.
- Part of ABB's established F200 RCCB series for residential, commercial and industrial applications.
Key Features
- ABB F202 A-100/0.3 RCCB.
- 2 poles.
- 100 A rated current.
- 300 mA rated residual current.
- Type A residual-current characteristic.
- 230 V rated voltage.
- 50–60 Hz rated frequency.
- Instantaneous operating characteristic.
- DIN-rail mounting with modular two-pole construction.
- ABB order code 2CSF202101R3900.
Type A Residual-Current Protection for Higher-Current Circuits
Type A RCCBs are designed to detect both sinusoidal alternating residual currents and pulsating direct residual currents. This broader residual-current response makes the ABB F202 A-100/0.3 suitable for compatible circuits containing electrical and electronic equipment that can produce pulsating DC components during fault conditions.
With its 100 A current rating and 300 mA residual-current sensitivity, the F202 A-100/0.3 is suited to appropriate higher-current earth-fault and installation-protection applications. It is an RCCB rather than an RCBO and therefore does not provide integral overload or short-circuit protection; suitable overcurrent protection must be provided separately according to the circuit design and applicable installation requirements.
Typical Applications
- Residential electrical distribution systems.
- Commercial electrical installations.
- Industrial low-voltage distribution systems.
- Compatible higher-current single-phase circuits.
- Circuits with loads capable of producing pulsating DC residual currents.
- Earth-fault and leakage-current protection applications.
- DIN-rail distribution and control panels.
Technical Specifications
| Product group | F200 / FH200 RCCB |
|---|---|
| Series | F200 |
| Order code | 2CSF202101R3900 |
| Product type | Residual Current Circuit Breaker (RCCB) |
| Number of poles | 2 |
| Rated current (In) | 100 A |
| Rated residual current (IΔn) | 300 mA |
| Residual current type | Type A |
| Residual-current detection | Sinusoidal AC and pulsating DC residual currents |
| Operating characteristic | Instantaneous |
| Rated voltage | 230 V |
| Rated insulation voltage (Ui) | 500 V |
| Rated impulse withstand voltage (Uimp) | 4 kV |
| Rated frequency | 50–60 Hz |
| Power loss | 6.5 W per pole at rated operating conditions |
| Terminal type | Screw terminals |
| Maximum solid conductor connection | 35 mm² |
| Mounting | DIN rail |
| Modular width | 2 modules |
| Width | 35 mm |
| Height | 85 mm |
| Built-in depth | 69 mm |
| Degree of protection | IP20 |
| Operating ambient temperature | -25 to +55 °C |
| Standards | IEC/EN 61008, UL 1053 |
| Product weight | approx. 0.225 kg |
| EAN / GTIN | 8012542915706 |
Frequently Asked Questions
What is the ABB F202 A-100/0.3?
The ABB F202 A-100/0.3 is a 2-pole Type A residual current circuit breaker from the F200 series, rated at 100 A with a 300 mA rated residual current.
What does the 300 mA rating of the F202 A-100/0.3 mean?
The 300 mA figure is the RCCB's rated residual operating current. This rating is suited to appropriate earth-fault and leakage-current protection applications rather than the 30 mA additional personal protection commonly specified for certain final circuits.
What residual currents can the ABB F202 A-100/0.3 detect?
As a Type A RCCB, the F202 A-100/0.3 is designed to respond to sinusoidal alternating residual currents and pulsating direct residual currents.
Does the ABB F202 A-100/0.3 provide overload and short-circuit protection?
No. The F202 A-100/0.3 is an RCCB without integral overcurrent protection, so appropriately selected overcurrent protection must be provided separately.
What is the ABB order code for the F202 A-100/0.3?
The ABB order code for the F202 A-100/0.3 is 2CSF202101R3900, with EAN / GTIN 8012542915706.
ABB F200 Type A Residual Current Protection
ABB F200 Type A RCCBs provide residual-current protection against sinusoidal alternating and pulsating direct fault currents, with configurations designed for residential, commercial and industrial low-voltage electrical installations.
