Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB FH202 AC-25/0.3 is a 2-pole Type AC residual current circuit breaker rated at 25 A with 300 mA residual current sensitivity for residential and commercial low-voltage electrical installations.
£75.23
The ABB FH202 AC-25/0.3 is a 2-pole Type AC residual current circuit breaker (RCCB) designed to protect low-voltage electrical installations against the effects of sinusoidal alternating earth fault currents. Identified by ABB order code 2CSF202006R3250, it forms part of ABB's FH200 range for residential and commercial building applications.
Rated at 25 A with a rated residual operating current of 300 mA, the FH202 AC-25/0.3 provides residual current protection for circuits where this sensitivity and Type AC characteristic are appropriate. Its 2-pole configuration allows both live conductors of a single-phase circuit to be disconnected together when the device operates.
The FH202 AC-25/0.3 occupies 2 × 17.5 mm modules and is designed for integration into modular electrical distribution equipment. As an RCCB, it provides residual current protection and switching rather than overload or short-circuit protection, so suitable overcurrent protection must be provided separately.
An RCCB monitors the current balance through the live conductors of a protected circuit. If an earth fault produces a residual current that reaches the device's operating threshold, the RCCB disconnects the circuit. The ABB FH202 AC-25/0.3 combines a 25 A rated current with a 300 mA residual current rating for installations requiring this level of earth-leakage protection.
As a Type AC device, the FH202 AC-25/0.3 is intended to respond to sinusoidal alternating residual currents. Its 300 mA rating is not the 30 mA sensitivity normally specified for additional protection against direct contact, so the RCCB must be selected according to the required protective function, connected loads and applicable installation standards. Separate correctly coordinated overcurrent protection is also required.
| Series | FH200 |
|---|---|
| ABB order code | 2CSF202006R3250 |
| Product group | F200 / FH200 RCCB |
| Product type | Residual current circuit breaker (RCCB) |
| Number of poles | 2 |
| Rated current | 25 A |
| Rated residual operating current | 300 mA |
| Residual current type | Type AC |
| Module width | 2 × 17.5 mm |
| Weight | 0.225 kg |
| Pack unit | 1/6 pieces |
| Standard | IEC/EN 61008 |
| Application | Residential and commercial buildings |
The ABB FH202 AC-25/0.3 is a 2-pole RCCB designed to detect sinusoidal alternating residual currents and disconnect the protected circuit when earth leakage reaches its 300 mA operating threshold.
The ABB FH202 AC-25/0.3 has a rated current of 25 A.
The FH202 AC-25/0.3 has a rated residual operating current of 300 mA.
Type AC means the RCCB is designed to respond to sinusoidal alternating residual currents. The RCCB type must be selected to suit the connected equipment and the requirements of the electrical installation.
No. The FH202 AC-25/0.3 provides residual current protection and does not incorporate overcurrent protection, so appropriate protection against overload and short-circuit currents must be provided separately.
ABB FH200 residual current circuit breakers provide dedicated earth-leakage protection for modular low-voltage installations, combining established residual current technology with a compact format for residential and commercial electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.