Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB FH202 AC-25/0.1 is a 2-pole Type AC residual current circuit breaker rated at 25 A with 100 mA residual current sensitivity for residential and commercial low-voltage electrical installations.
£78.85
The ABB FH202 AC-25/0.1 is a 2-pole Type AC residual current circuit breaker (RCCB) designed for residual current protection in residential and commercial low-voltage electrical installations. Identified by ABB order code 2CSF202006R2250, it forms part of ABB's FH200 range of modular residual current protection devices.
Rated at 25 A with a rated residual operating current of 100 mA, the FH202 AC-25/0.1 is designed to respond to sinusoidal alternating earth fault currents. Its 2-pole configuration enables both live conductors of a single-phase circuit to be switched together when the RCCB operates.
The FH202 AC-25/0.1 occupies 2 modules of 17.5 mm and is designed for modular electrical distribution equipment. As a dedicated RCCB, it provides residual current protection while suitable overload and short-circuit protection must be provided separately within the installation.
An RCCB monitors the balance of current flowing through the live conductors of a protected circuit. When leakage to earth creates a residual current exceeding the device's operating threshold, the RCCB disconnects the circuit. The ABB FH202 AC-25/0.1 provides this function with a 100 mA residual operating current and a 25 A rated current.
As a Type AC RCCB, the FH202 AC-25/0.1 is intended for applications where sinusoidal alternating residual currents are expected. Because an RCCB does not incorporate overload or short-circuit protection, the device must be coordinated with suitable overcurrent protection and selected according to the characteristics and requirements of the electrical installation.
| Series | FH200 |
|---|---|
| ABB order code | 2CSF202006R2250 |
| Product group | F200 / FH200 RCCB |
| Product type | Residual current circuit breaker (RCCB) |
| Number of poles | 2 |
| Rated current | 25 A |
| Rated residual operating current | 100 mA |
| Residual current type | Type AC |
| Module width | 2 × 17.5 mm |
| Weight | approximately 0.225 kg |
| Pack unit | 1/6 pieces |
| Standard | IEC/EN 61008 |
| Application | Residential and commercial buildings |
The ABB FH202 AC-25/0.1 is a 2-pole RCCB designed to detect sinusoidal alternating residual currents and disconnect a protected circuit when earth leakage reaches its 100 mA operating threshold.
The ABB FH202 AC-25/0.1 has a rated current of 25 A.
The FH202 AC-25/0.1 has a rated residual operating current of 100 mA.
Type AC means the RCCB is designed to respond to sinusoidal alternating residual currents. The appropriate residual current device type should always be selected according to the connected equipment and applicable installation requirements.
No. The FH202 AC-25/0.1 is an RCCB dedicated to residual current protection and does not incorporate overcurrent protection, so appropriate overload and short-circuit protection must be provided separately.
ABB FH200 residual current circuit breakers provide purpose-designed earth-leakage protection for modular low-voltage installations, combining dependable residual current detection with a compact format for residential and commercial electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.