Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB F202AC250.01 F202 AC-25/0.01 is a 2-pole Type AC residual current circuit breaker rated at 25 A with 10 mA residual-current sensitivity for compatible single-phase electrical installations.
£88.69
The ABB F202AC250.01, type F202 AC-25/0.01, is a 2-pole Type AC residual current circuit breaker (RCCB) designed to provide residual-current protection in compatible single-phase electrical installations. Part of ABB’s established F200 RCCB family, it combines a rated current of 25 A with a highly sensitive rated residual operating current of 10 mA.
As a Type AC RCCB, the F202 AC-25/0.01 is designed to respond to sinusoidal alternating residual currents. Its 10 mA sensitivity makes it suitable for applications requiring a lower residual-current trip threshold than conventional 30 mA RCCBs, subject to the requirements of the electrical installation and applicable standards.
The device uses ABB’s compact modular format for DIN-rail installation and incorporates a test facility for periodic functional verification. With two poles switching the protected circuit, the F202 AC-25/0.01 provides a purpose-designed residual-current protection solution for residential, commercial and similar electrical distribution applications.
An RCCB monitors the current flowing through the live conductors of a circuit and disconnects the supply when an imbalance exceeds its rated residual operating current. This helps provide protection against residual-current hazards, while separate overcurrent protection is required because an RCCB does not itself provide overload or short-circuit protection.
The ABB F202 AC-25/0.01 has a 10 mA residual operating threshold and a Type AC characteristic for sinusoidal alternating residual currents. Its two-pole configuration and 25 A current rating make it suitable for appropriately designed single-phase circuits where this level and type of residual-current protection is specified.
| Series | F200 |
|---|---|
| SKU | F202AC250.01 |
| ABB order code | 2CSF202001R0250 |
| Product type | Residual current circuit breaker (RCCB) |
| Number of poles | 2 |
| Rated current | 25 A |
| Rated residual operating current | 10 mA |
| Residual-current type | AC |
| Rated voltage | 230 V AC |
| Rated frequency | 50/60 Hz |
| Rated conditional short-circuit current | 10 kA |
| Rated impulse withstand voltage | 4 kV |
| Mounting | DIN rail |
| Standard | IEC/EN 61008-1 |
The ABB F202 AC-25/0.01 is a 2-pole Type AC RCCB rated at 25 A with a rated residual operating current of 10 mA.
The 10 mA figure is the RCCB’s rated residual operating current, indicating its high-sensitivity residual-current protection threshold.
Type AC means the RCCB is designed to respond to sinusoidal alternating residual currents. The residual-current type should always be selected to suit the connected loads and installation requirements.
No. The F202 AC-25/0.01 is an RCCB for residual-current protection and does not itself provide overload or short-circuit protection, so suitable overcurrent protection must be provided separately.
The ABB manufacturer order code is 2CSF202001R0250.
ABB F200 residual current circuit breakers provide modular residual-current protection for residential, commercial and industrial electrical distribution systems, with configurations and sensitivities suited to a wide range of installation requirements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.