Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA804 A-100/0.3 is a four-pole 100 A Type A residual current device block with 300 mA sensitivity for assembly with compatible ABB S800 series miniature circuit breakers.
£461.50
The ABB DDA804 A-100/0.3 is a high-performance Type A residual current device (RCD) block designed to provide earth-fault protection when assembled with compatible ABB S800 series miniature circuit breakers. With a rated current of 100 A, four-pole configuration and 300 mA rated residual operating current, it is well suited to commercial and industrial electrical distribution systems.
As part of the ABB DDA800 series, this RCD block provides Type A residual-current detection, enabling it to respond to sinusoidal alternating residual currents and pulsating DC residual currents. Its instantaneous operating characteristic makes it suitable for installations requiring dependable residual-current protection without an intentional selective time delay.
The DDA804 A-100/0.3 is rated for 230/400, 240/415 and 400/690 V AC systems at 50–60 Hz. It is designed for assembly with compatible ABB S800S, S800N, S800C and S800B miniature circuit breakers, allowing residual-current and overcurrent protection to be combined in a robust modular protection solution.
Residual current device blocks monitor circuits for current unintentionally flowing to earth. The ABB DDA804 A-100/0.3 provides Type A detection, enabling protection against sinusoidal alternating residual currents as well as pulsating DC residual currents that can occur in modern electrical and electronic equipment.
When assembled with a compatible ABB S800 miniature circuit breaker, the DDA804 A-100/0.3 complements the MCB's overcurrent protection with residual-current protection. This provides a practical modular solution for protecting installations against earth-fault currents while retaining the robust circuit protection capabilities of the S800 platform.
| Series | DDA800 |
|---|---|
| ABB order code | 2CSB804101R3000 |
| Product type | Residual current device (RCD) block |
| Residual-current type | Type A |
| Operating characteristic | Instantaneous |
| Number of poles | 4 |
| Rated current | 100 A |
| Rated residual operating current | 300 mA |
| Rated voltage | 230/400, 240/415, 400/690 V AC |
| Rated operational voltage | 400/690 V |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 690 V |
| Rated impulse withstand voltage | 6 kV |
| Maximum surge current | 0.25 kA |
| Power loss | 10.5 W |
| Protection rating | IP2X |
| Standard | IEC/EN 60947-2 Annex B |
| Compatible MCB series | ABB S800S, S800N, S800C and S800B |
| Dimensions (W × H × D) | 117 × 108.2 × 82.3 mm |
| Weight | 0.46 kg |
| EAN | 8012542547532 |
The DDA804 A-100/0.3 is a four-pole Type A RCD block designed to provide residual-current protection when assembled with a compatible ABB S800 series miniature circuit breaker.
The ABB DDA804 A-100/0.3 has a rated current of 100 A.
The DDA804 A-100/0.3 has a rated residual operating current of 300 mA.
Type A residual-current protection responds to sinusoidal alternating residual currents and pulsating DC residual currents, making it suitable for a broad range of modern electrical installations.
The RCD block is designed for assembly with compatible ABB S800S, S800N, S800C and S800B miniature circuit breakers.
ABB DDA800 residual current device blocks provide dependable earth-fault protection for commercial and industrial electrical systems, combining with compatible S800 series miniature circuit breakers to create robust residual-current and overcurrent protection solutions.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.