Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA803 A S-63/1 is a three-pole 63 A Type A selective residual current device block with 1000 mA sensitivity for use with compatible ABB S800 series miniature circuit breakers.
£397.93
The ABB DDA803 A S-63/1 is a selective Type A residual current device (RCD) block designed to provide earth-fault protection when combined with compatible ABB S800 series miniature circuit breakers. With a rated current of 63 A, three-pole configuration and 1000 mA rated residual operating current, it is designed for commercial and industrial electrical distribution applications requiring coordinated residual-current protection.
As part of the ABB DDA800 series, this RCD block detects sinusoidal alternating and pulsating DC residual currents. The selective operating characteristic incorporates an intentional tripping delay, allowing selectivity with downstream instantaneous residual-current protection devices and helping isolate earth faults at the appropriate level of the electrical distribution system.
The DDA803 A S-63/1 is rated for 400 / 415 / 690 V AC operation at 50–60 Hz and is suitable for use with compatible ABB S800S, S800N, S800C and S800B circuit breakers. When assembled with a compatible S800 MCB, it provides combined overcurrent and residual-current protection for demanding electrical installations.
Residual current device blocks monitor electrical circuits for current flowing unintentionally to earth. When the DDA803 A S-63/1 is assembled with a compatible ABB S800 miniature circuit breaker, the resulting protective arrangement combines residual-current protection with the overcurrent protection provided by the MCB.
The selective characteristic of the DDA803 A S-63/1 introduces an intentional operating delay. This supports coordination with downstream instantaneous residual-current devices, helping maintain continuity of supply by allowing the protective device closest to an earth fault to operate first where appropriate selectivity conditions are achieved.
| Series | DDA800 |
|---|---|
| ABB order code | 2CSB803201R5630 |
| Product type | Residual current device (RCD) block |
| Residual-current type | Type A selective (S) |
| Number of poles | 3 |
| Rated current | 63 A |
| Rated residual operating current | 1000 mA |
| Rated voltage | 400 / 415 / 690 V AC |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 690 V |
| Rated impulse withstand voltage | 6 kV |
| Surge current capacity | 5 kA |
| Protection rating | IP2X |
| Operating ambient temperature | -25 to +60 °C |
| Standard | IEC/EN 60947-2 Annex B |
| Compatible MCB series | ABB S800S, S800N, S800C and S800B |
| Dimensions (W × H × D) | 117 × 108.2 × 82.3 mm |
| Weight | 0.4 kg |
| EAN | 8012542923206 |
The DDA803 A S-63/1 is a three-pole selective Type A RCD block designed to provide residual-current protection when combined with a compatible ABB S800 series miniature circuit breaker.
The ABB DDA803 A S-63/1 has a rated current of 63 A.
The DDA803 A S-63/1 has a rated residual operating current of 1000 mA.
Type A protection detects sinusoidal alternating and pulsating DC residual currents, while the selective characteristic provides an intentional tripping delay to support coordination with downstream instantaneous residual-current devices.
The RCD block is designed for use with compatible ABB S800S, S800N, S800C and S800B miniature circuit breakers.
ABB DDA800 residual current device blocks provide dependable earth-fault protection for commercial and industrial electrical systems, with selective Type A variants supporting coordinated protection alongside compatible S800 series miniature circuit breakers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.