Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA803 A S-100/0.3 is a 100 A three-pole 300 mA Type A selective RCD block designed for coordinated residual current protection with compatible ABB S800 miniature circuit-breakers.
£583.45
The ABB DDA803 A S-100/0.3 is a high-performance Type A selective residual current device (RCD) block designed for assembly with compatible ABB S800 miniature circuit-breakers. As part of the ABB DDA800 series, it provides residual current protection for electrical installations while allowing the associated S800 MCB to provide overload and short-circuit protection.
The selective S characteristic incorporates a time delay that enables coordination with downstream residual current protective devices, helping ensure that a downstream fault is disconnected locally while upstream circuits remain energised where correct selectivity conditions are met. As a Type A device, the DDA803 detects sinusoidal alternating residual currents and pulsating DC residual currents, making it suitable for modern commercial and industrial electrical systems.
With a rated current of 100 A, a three-pole configuration and a rated residual operating current of 300 mA, the DDA803 A S-100/0.3 is well suited to three-phase distribution circuits requiring selective earth leakage and fault protection. Its modular design enables integration with compatible ABB S800 miniature circuit-breakers to create a coordinated protective assembly.
Residual current devices monitor current balance within a protected circuit and operate when leakage to earth exceeds the specified threshold. The 300 mA rated residual current of the ABB DDA803 A S-100/0.3 makes it suitable for appropriate earth fault and leakage protection applications in commercial and industrial distribution systems.
The selective S characteristic provides delayed operation to facilitate coordination with downstream RCDs. When correctly designed, this arrangement allows a downstream residual current device to clear a local fault before the upstream selective device operates, helping improve continuity of supply across unaffected circuits.
| Series | DDA800 |
|---|---|
| ABB order code | 2CSB803201R3000 |
| Product type | Selective RCD block |
| Residual current type | Type A |
| Operating characteristic | Selective S |
| Rated current | 100 A |
| Rated residual current | 300 mA |
| Number of poles | 3 |
| Application | Three-phase electrical distribution |
| Residual current detection | Sinusoidal AC and pulsating DC |
| Compatible product family | ABB S800 miniature circuit-breakers |
The DDA803 A S-100/0.3 is a Type A selective RCD block designed for assembly with compatible ABB S800 miniature circuit-breakers to provide residual current protection in suitable three-phase electrical distribution systems.
The ABB DDA803 A S-100/0.3 has a rated residual operating current of 300 mA.
The S characteristic indicates selective, time-delayed operation designed to support coordination with downstream residual current protective devices.
As a Type A device, it detects sinusoidal alternating residual currents and pulsating DC residual currents.
The ABB order code for the DDA803 A S-100/0.3 is 2CSB803201R3000.
ABB DDA800 RCD blocks are designed to combine with compatible S800 miniature circuit-breakers, providing dependable residual current protection and selective options for demanding commercial and industrial low-voltage distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.