Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA204AS630.1 is a four-pole 63 A, 100 mA selective Type A DDA200 residual current device block with intentional tripping delay and additional terminals for remote tripping.
£161.95
The ABB DDA204AS630.1 is a four-pole Type A selective residual current device (RCD) block designed for assembly with compatible ABB miniature circuit breakers. Part of the established ABB DDA200 RCD series, this selective Type A model provides residual-current protection with an intentional tripping delay to support discrimination with downstream instantaneous residual-current devices.
Rated at 63 A with a rated residual operating current of 100 mA, the DDA204AS630.1 responds to sinusoidal alternating and pulsating DC residual currents. Its selective S characteristic is particularly useful in coordinated installations where an upstream RCD should remain closed while a downstream instantaneous device clears an appropriate local residual-current fault.
The DDA204AS630.1 features a four-pole configuration for three-phase systems with neutral and is designed for assembly with ABB S200 series and S300P miniature circuit breakers. ABB also equips DDA200 A S devices with additional terminals for remote tripping, supporting integration into commercial and industrial protection and control systems.
The ABB DDA204AS630.1 combines Type A residual-current detection with a selective operating characteristic. It responds to sinusoidal alternating and pulsating DC residual currents while incorporating an intentional tripping delay, helping achieve selectivity with suitable downstream instantaneous residual-current protection devices.
This selective behaviour makes the DDA204AS630.1 particularly appropriate as an upstream protection device in coordinated installations. When assembled with a compatible ABB miniature circuit breaker, it combines residual-current detection with the overload and short-circuit protection provided by the associated breaker. Its 100 mA sensitivity is intended for appropriate earth-leakage and selective protection applications rather than as a substitute for 30 mA additional protection where that sensitivity is required.
| Series | DDA200 |
|---|---|
| SKU | DDA204AS630.1 |
| ABB order code | 2CSB204201R2630 |
| EAN | 8012542800101 |
| Product type | Selective residual current device (RCD) block |
| Residual current type | Type A |
| Selective characteristic | S, intentional tripping delay |
| Rated current | 63 A |
| Rated residual current | 100 mA |
| Rated voltage | 230/400 V AC |
| Number of poles | 4 |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Protection rating | IP2X |
| Operating ambient temperature | -25 to +55 °C |
| Maximum conductor cross-section | 25 mm² |
| Dimensions (W × H × D) | 140 × 93 × 76 mm |
| Net weight | approx. 0.305 kg |
| Remote tripping | Additional terminals provided |
| Compatible MCB families | ABB S200 series and S300P |
| Reference standard | IEC/EN 61009 Annex G |
The ABB DDA204AS630.1 is a four-pole selective Type A RCD block designed for assembly with compatible ABB miniature circuit breakers. It is particularly suited to commercial and industrial installations requiring coordinated upstream residual-current protection.
The DDA204AS630.1 has a rated current of 63 A and a rated residual operating current of 100 mA.
The S characteristic indicates selective operation with an intentional tripping delay. This allows the device to support discrimination with suitable downstream instantaneous residual-current devices, helping a downstream device clear a local fault before the upstream selective device operates.
As a Type A device, the DDA204AS630.1 is designed to detect sinusoidal alternating residual currents and pulsating DC residual currents.
Yes. ABB specifies that DDA200 A S selective RCD blocks are provided with additional terminals for remote tripping, allowing the protection assembly to be integrated into suitable remote control and safety schemes.
ABB DDA200 selective Type A residual current blocks support coordinated electrical protection by combining Type A residual-current detection, intentional time-delayed operation and remote-tripping capability with compatible ABB miniature circuit breakers for demanding commercial and industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.