Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA204 AC-25/0.5 is a four-pole 25 A AC type RCD block with 500 mA residual-current sensitivity, designed for assembly with compatible ABB miniature circuit breakers.
£77.29
The ABB DDA204 AC-25/0.5 is a four-pole AC type residual current device (RCD) block designed for assembly with compatible ABB miniature circuit breakers. As part of the ABB DDA200 RCD block series, it provides residual-current protection for electrical distribution systems in residential, commercial and industrial applications.
This RCD block is designed to detect sinusoidal alternating residual currents. Its 500 mA rated residual operating current makes it suitable for circuits requiring earth leakage and fault protection at this sensitivity, helping protect installations against the effects of insulation faults and unintended current flow to earth.
With a 25 A rated current, four-pole configuration and 230/400 V AC rated voltage, the DDA204 AC-25/0.5 is suited to multi-pole circuits requiring AC type residual-current protection. When combined with a compatible ABB miniature circuit breaker, the resulting assembly provides residual-current protection alongside the MCB's overcurrent and short-circuit protection.
Residual current devices monitor the balance of current flowing through the active conductors of an electrical circuit. If an insulation fault or other leakage path causes current to flow to earth, the resulting imbalance can be detected so that the protected circuit is disconnected when the RCD block is correctly assembled with its compatible circuit breaker.
The ABB DDA200 series provides a modular method of adding residual-current protection to compatible miniature circuit breakers. The DDA204 AC-25/0.5 combines a 25 A current rating with 500 mA AC type residual-current sensitivity, providing a practical protection solution for distribution circuits requiring these electrical characteristics.
| Series | DDA200 |
|---|---|
| ABB order code | 2CSB204001R4250 |
| Product type | Residual current device (RCD) block |
| Residual-current type | AC |
| Number of poles | 4 |
| Rated current | 25 A |
| Rated residual operating current | 500 mA |
| Rated voltage | 230/400 V AC |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Applicable standard | IEC/EN 61009 Annex G |
| Mounting | DIN rail as part of a compatible modular circuit protection assembly |
It is a four-pole RCD block used to provide residual-current protection when assembled with a compatible ABB miniature circuit breaker.
The ABB DDA204 AC-25/0.5 has a rated current of 25 A.
It has a rated residual operating current of 500 mA.
This is an AC type RCD block designed to detect sinusoidal alternating residual currents.
No. It is an RCD block designed to be combined with a compatible ABB miniature circuit breaker, integrating residual-current protection with the overcurrent and short-circuit protection provided by the associated MCB.
ABB DDA200 residual current device blocks provide a modular solution for integrating residual-current protection with compatible miniature circuit breakers in residential, commercial and industrial electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.