Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA202 B-40/0.03 AP-R is a 2-pole Type B high-immunity residual current device block rated at 40 A with 30 mA residual current sensitivity for demanding low-voltage installations containing electronic equipment.
£581.08
The ABB DDA202 B-40/0.03 AP-R, order code 2CSB202592R1400, is a 2-pole Type B residual current device (RCD) block designed for assembly with compatible ABB miniature circuit breakers to provide comprehensive residual current protection in low-voltage electrical installations. As part of the ABB DDA200 RCD series, it is particularly suited to commercial and industrial installations containing electronic equipment.
This Type B RCD block has a 40 A rated current and a highly sensitive 30 mA rated residual operating current. Type B protection responds to a broad range of residual current waveforms, including sinusoidal AC, pulsating DC and smooth DC residual currents, making it suitable for applications where power electronics can generate residual currents that require all-current-sensitive protection.
The AP-R high-immunity characteristic incorporates a short time delay to improve resistance to unwanted tripping caused by transient disturbances. With a 230 V rated voltage, 50–60 Hz rated frequency and maximum surge-current withstand of 3 kA, the DDA202 B-40/0.03 AP-R provides robust residual current protection for demanding electrical systems.
Type B residual current protection is designed to detect a broad range of earth fault currents, including sinusoidal alternating, pulsating DC and smooth DC residual currents. This makes the ABB DDA202 B-40/0.03 AP-R particularly suitable for installations containing power electronics and other equipment capable of generating residual current waveforms that cannot be fully addressed by conventional Type AC or Type A protection.
The AP-R high-immunity characteristic provides enhanced resistance to transient disturbances, with a short-time delay of approximately 10 ms and surge-current withstand of 3 kA. When assembled with a compatible ABB miniature circuit breaker, the RCD block provides residual current protection while the associated MCB provides overcurrent and short-circuit protection.
| Series | DDA200 |
|---|---|
| Order code | 2CSB202592R1400 |
| EAN | 8012542515128 |
| Product group | DDA200 RCD |
| Product type | Residual current device block |
| Residual current type | Type B |
| Operating characteristic | AP-R high immunity |
| Rated current | 40 A |
| Rated residual current | 30 mA |
| Rated voltage | 230 V AC |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Number of poles | 2 |
| Frequency | 50–60 Hz |
| Maximum surge current | 3 kA |
| Short-time delay | 10 ms |
| Power loss | 3.2 W |
| Electrical endurance | 10,000 cycles |
| Protection rating | IP2X |
| Connecting capacity | 25 mm² rigid or flexible conductor |
| Operating ambient temperature | -25 to +55 °C |
| Standards | IEC/EN 61009 Annex G and IEC/EN 62423 |
| Compatible MCB families | ABB S200 L, S200, S200 M and S200 P |
| Dimensions (W × H × D) | 105 × 93 × 76 mm |
| Weight | approx. 0.29 kg |
The ABB DDA202 B-40/0.03 AP-R is a Type B RCD block designed for assembly with a compatible ABB miniature circuit breaker to provide residual current protection in installations containing electronic equipment and other loads capable of producing AC, pulsating DC or smooth DC residual currents.
The DDA202 B-40/0.03 AP-R has a rated current of 40 A.
The device has a rated residual operating current of 30 mA.
Type B indicates all-current-sensitive residual current detection, including AC, pulsating DC and smooth DC residual currents, while AP-R identifies ABB's high-immunity characteristic designed to improve resistance to unwanted tripping caused by transient disturbances.
The DDA200 RCD block can be assembled with compatible ABB S200 L, S200, S200 M and S200 P miniature circuit breakers to create a combined residual current, overcurrent and short-circuit protection arrangement.
ABB DDA200 Type B AP-R RCD blocks provide advanced all-current-sensitive residual current protection with enhanced immunity to transient disturbances for demanding commercial and industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.