Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB S303P-C10 three-pole 10 A miniature circuit breaker with a Type C tripping characteristic and 25 kA breaking capacity for industrial overload and short-circuit protection.
£61.63
The ABB S303P-C10 (Product ID: 2CDS383001R0104) is a high-performance 3-pole miniature circuit breaker (MCB) designed to protect industrial and commercial electrical installations against overloads and short circuits. Part of the established ABB System pro M compact S300P series, it combines dependable circuit protection with a compact modular design for use in distribution boards, switchgear and machinery control panels.
The S303P-C10 features a C tripping characteristic, making it suitable for circuits with moderate switch-on currents. This allows the breaker to accommodate the normal inrush associated with equipment such as small motors, transformers, lighting systems and industrial control devices while responding rapidly to genuine fault conditions.
With a 10 A rated current, three protected poles and a 25 kA short-circuit breaking capacity, the S303P-C10 delivers reliable three-phase protection in installations where high fault interruption performance, service continuity and long-term operational safety are required.
The ABB S303P-C10 uses complementary thermal and electromagnetic releases to protect electrical circuits. The thermal mechanism responds to sustained overloads, while the electromagnetic mechanism provides rapid disconnection during short-circuit conditions, helping to prevent damage to conductors, equipment and connected loads.
Its Type C operating characteristic is widely used for industrial and commercial circuits where moderate inrush currents are expected. This makes the breaker suitable for machinery controls, contactors, transformers, lighting circuits, automation systems and general-purpose three-phase distribution.
Tick the specs you need, then view products that match.
| Current | 10 A | |
|---|---|---|
| Phase | Three Phase | |
| Poles | 3-pole | |
| Device Type | MCB | |
| Trip Curve | C curve | |
| Breaking Capacity | 25 kA | |
| Manufacturer | ABB | |
| Product range | System pro M compact | |
| Series | S300P | |
| Model | S303P-C10 | |
| Product ID | 2CDS383001R0104 | |
| EAN | 4016779078146 | |
| Product type | Miniature Circuit Breaker (MCB) | |
| Rated current | 10 A | |
| Number of poles | 3 | |
| Number of protected poles | 3 | |
| Tripping characteristic | C | |
| Rated operational voltage | Up to 415 V AC | |
| Rated DC voltage | Up to 125 V DC, subject to circuit configuration | |
| Frequency | 50/60 Hz | |
| Rated short-circuit breaking capacity | 25 kA | |
| Rated insulation voltage | 500 V | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | IV | |
| Pollution degree | 3 | |
| Protection rating | IP20 at the terminals | |
| Mounting method | DIN rail | |
| Module width | 3 modules | |
| Dimensions (H × W × D) | approximately 88 × 52.5 × 69 mm | |
| Net weight | approximately 0.37 kg | |
| Standards | IEC/EN 60898-1, IEC/EN 60947-2, UL 1077 and CSA 22.2 No. 235 | |
| HS Code | 85362010 | |
| Country of Manufacture | Germany |
The ABB S303P-C10 protects three-phase industrial and commercial electrical circuits against overloads and short circuits.
The circuit breaker has a nominal current rating of 10 A.
A C tripping characteristic is designed for circuits with moderate inrush currents, including small motors, transformers, lighting systems and industrial control equipment.
The S303P-C10 has three protected poles, enabling all three phases of a circuit to be disconnected together.
The ABB S303P-C10 has a rated AC short-circuit breaking capacity of 25 kA.
The breaker is designed for mounting onto a standard DIN rail inside an electrical distribution board, switchboard or industrial control panel.
Yes. It can be used in selected DC applications up to 125 V DC, provided the installation arrangement and applicable ABB technical requirements are followed.
ABB System pro M compact circuit protection products are trusted by electrical engineers, panel builders, machine manufacturers and maintenance professionals for dependable protection, straightforward installation and reliable operation in demanding electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.