Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB ST202M-K7 is a 7 A two-pole K-characteristic miniature circuit breaker and UL 1077 supplementary protector for industrial equipment and control circuit protection.
£61.65
The ABB ST202M-K7 is a high-performance 2-pole miniature circuit breaker (MCB) designed to provide supplementary overcurrent and short-circuit protection for industrial control equipment and electrical sub-circuits. As part of the ABB ST200M series, this breaker combines a compact DIN-rail format with K-characteristic tripping and compliance with UL 1077, IEC/EN 60947-2 and CSA 22.2 No. 235 requirements.
With a rated current of 7 A, the ST202M-K7 is particularly suited to circuits containing inductive loads where short-duration starting currents may occur. Its K tripping characteristic helps provide dependable protection while reducing unnecessary operation during normal equipment starting conditions.
The ST202M-K7 provides 15 kA ultimate short-circuit breaking capacity at 400 V AC according to IEC 60947-2 and a 10 kA interrupting rating according to UL 1077. Its two-pole construction allows simultaneous isolation and protection of two conductors, making it a practical choice for industrial control panels, machinery and automation equipment.
Miniature circuit breakers such as the ABB ST202M-K7 automatically disconnect a circuit when excessive current caused by an overload or short circuit is detected. This helps protect downstream equipment and wiring while allowing straightforward manual resetting once the cause of the fault has been corrected.
The ST200M range is designed for supplementary protection in industrial and commercial electrical systems. The K characteristic makes the ST202M-K7 particularly useful for loads with higher starting currents, while its compact modular construction supports efficient installation alongside other DIN-rail devices in control cabinets and distribution assemblies.
Tick the specs you need, then view products that match.
| Certification | UL 1077 | |
|---|---|---|
| Series | ST200M | |
| ABB order code | 2CDS272334R0387 | |
| Product type | Miniature circuit breaker / supplementary protector | |
| Number of poles | 2P | |
| Number of protected poles | 2 | |
| Rated current | 7 A | |
| Tripping characteristic | K | |
| Rated operational voltage | 400 V AC according to IEC 60947-2 | |
| Rated insulation voltage (Ui) | 440 V | |
| Rated impulse withstand voltage (Uimp) | 4 kV | |
| Rated frequency | 50 / 60 Hz | |
| Ultimate short-circuit breaking capacity | 15 kA at 400 V AC | |
| Service short-circuit breaking capacity | 11.2 kA at 400 V AC | |
| UL 1077 interrupting rating | 10 kA | |
| Energy limiting class | 3 | |
| Standards | UL 1077, IEC/EN 60947-2, CSA 22.2 No. 235 | |
| Terminal type | Double clamp | |
| Rigid conductor capacity | up to 35 mm² | |
| Flexible conductor capacity | up to 25 mm² | |
| Modular width | 2 modules | |
| Dimensions (H × W × D) | 88 × 35 × 69 mm | |
| Weight | approx. 0.23 kg |
The ST202M-K7 is a 2-pole supplementary miniature circuit breaker used to protect industrial equipment and electrical sub-circuits against overload and short-circuit currents.
The ST202M-K7 has a rated current of 7 A.
The K tripping characteristic is suited to circuits containing inductive equipment and loads that can produce relatively high starting currents, helping avoid unwanted tripping during normal start-up conditions.
The breaker has an ultimate short-circuit breaking capacity of 15 kA at 400 V AC according to IEC 60947-2 and an interrupting rating of 10 kA according to UL 1077.
Yes. The ST202M-K7 complies with UL 1077 and is designed for supplementary overcurrent protection in applications where the required primary branch-circuit protection is provided separately.
ABB ST200M miniature circuit breakers provide dependable supplementary protection for industrial control systems, machinery and electrical equipment, combining compact DIN-rail installation with established ABB circuit-protection technology.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.