Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CDE281001R1100 ABB E201/100G Switch Disconnector 1P 100 A Grey
ABB E201/100G is a compact single-pole 100 A switch disconnector with a grey operating handle, 230 V AC single-pole rating and 25 kA conditional rated short-circuit current for dependable high-current manual switching and isolation.
£28.18
Why Choose the ABB E201/100G Switch Disconnector?
The ABB E201/100G is a high-current single-pole switch disconnector designed for manual switching and safe isolation of electrical circuits in low-voltage distribution systems. Part of the ABB E200 series, it combines a substantial 100 A rated current with a compact single-module format for commercial, industrial and building-services installations.
The E201/100G provides a single normally open switching contact and has a 230 V AC single-pole rating. Its grey operating handle is sealable in both ON and OFF positions, while the device is designed for both circuit isolation and switching under load in accordance with IEC/EN 60947-3.
With a 25 kA conditional rated short-circuit current, 3.95 W power loss and compact 17.5 mm width, the E201/100G delivers high-current switching capability without occupying excessive distribution-board space. Compatible ABB S2C-H6R auxiliary contacts can also be fitted for signalling and status-monitoring requirements.
Key Advantages
- High-current single-pole switching and isolation for low-voltage circuits.
- 100 A rated current in a compact modular format.
- 230 V AC single-pole rating.
- 25 kA conditional rated short-circuit current when used with suitable upstream protection.
- Grey operating handle sealable in both ON and OFF positions.
- Designed for both isolation and manual switching under load.
- Supports up to three compatible ABB S2C-H6R auxiliary contacts.
- Compact 17.5 mm single-module width for efficient panel utilisation.
Key Features
- ABB E200 switch disconnector series.
- Single-pole (1P) configuration.
- 1 normally open (1NO) contact.
- 100 A rated current.
- 230 V AC rated voltage.
- 230 / 400 V AC rated operational voltage.
- 50/60 Hz rated frequency.
- 25 kA conditional rated short-circuit current.
- 3.95 W power loss at rated operating conditions.
- IP10 degree of protection.
- Grey toggle actuator.
- Screw-terminal connection and DIN-rail mounting.
High-Current Manual Switching and Circuit Isolation
The ABB E201/100G provides a compact means of manually switching and isolating circuits carrying currents up to 100 A. Its switch-disconnector function is intended for safe disconnection and load switching rather than automatic fault interruption, making it suitable for installations requiring a dedicated high-current isolation point.
Appropriate upstream short-circuit and overload protection must be provided by devices such as fuses or circuit breakers. When correctly protected, the E201/100G has a 25 kA conditional rated short-circuit current. Its sealable operating handle and compatibility with up to three S2C-H6R auxiliary contacts provide additional flexibility for controlled access and remote status indication.
Typical Applications
- High-current single-phase circuit switching and isolation.
- Commercial electrical distribution boards.
- Industrial control and distribution panels.
- Building-services electrical installations.
- Manual isolation of downstream equipment and loads.
- Circuits requiring a compact 100 A DIN-rail switch disconnector.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Modular Switch Disconnect | |
|---|---|---|
| Mounting Type | DIN rail | |
| Current | 100 A | |
| Poles | 1-pole | |
| Product Series | ABB E200 | |
| Series | E200 | |
| ABB order code | 2CDE281001R1100 | |
| Product group | Protection & Control | |
| Product type | Switch disconnector / isolator | |
| Number of poles | 1 | |
| Contact configuration | 1NO | |
| Rated current | 100 A | |
| Rated voltage | 230 V AC | |
| Rated operational voltage | 230 / 400 V AC | |
| Minimum operational voltage | 12 V | |
| Rated frequency | 50/60 Hz | |
| Conditional rated short-circuit current | 25 kA | |
| Power loss | 3.95 W per pole at rated operating conditions | |
| Protection rating | IP10 | |
| Operating handle colour | Grey | |
| Actuator type | Toggle | |
| Terminal type | Screw terminals | |
| Auxiliary contact compatibility | Up to 3 × S2C-H6R | |
| Operating temperature | -25 to +55 °C | |
| Module width | 1 module | |
| Dimensions (W × H × D) | 17.5 × 85 × 69 mm | |
| Mounting type | DIN rail | |
| Net weight | 0.095 kg | |
| Standard | IEC/EN 60947-3 | |
| EAN | 4016779645751 |
Frequently Asked Questions
What is the ABB E201/100G used for?
The E201/100G is a single-pole switch disconnector designed for manual switching and isolation of low-voltage electrical circuits with a rated current up to 100 A.
What is the rated current of the ABB E201/100G?
The ABB E201/100G has a 100 A rated current, providing high-current switching capability in a compact single-module format.
What is the conditional short-circuit current of the E201/100G?
The E201/100G has a 25 kA conditional rated short-circuit current when installed with suitable upstream short-circuit and overload protection.
Does the ABB E201/100G provide automatic overcurrent protection?
No. The E201/100G is a switch disconnector rather than a circuit breaker, so suitable upstream fuses or circuit breakers are required to provide short-circuit and overload protection.
Can auxiliary contacts be fitted to the ABB E201/100G?
Yes. The E201/100G can accommodate up to three compatible ABB S2C-H6R auxiliary contacts for switching-position signalling and monitoring applications.
Trusted High-Current Switching from ABB
ABB E200 switch disconnectors provide compact and dependable manual switching and isolation for low-voltage electrical systems, combining high-current capability, modular DIN-rail construction and flexible accessory options for professional distribution and control installations.
