Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CDE281001R1080 ABB E201/80G Switch Disconnector 1P 80 A Grey
ABB E201/80G is a compact single-pole 80 A switch disconnector rated at 230 V AC with a grey operating lever for DIN rail mounted manual switching and electrical isolation.
£21.91
Why Choose the ABB E201/80G Switch Disconnector?
The ABB E201/80G is a compact single-pole switch disconnector designed for manual switching and safe electrical isolation in distribution boards, switchboards and control panels. Part of ABB's E200 modular switch range, it combines a high 80 A rated current with a space-saving single-module DIN rail design.
The E201/80G has a 1NO contact configuration, a rated voltage of 230 V AC and a grey operating lever. It is designed for load switching and isolation in accordance with IEC/EN 60947-3, with upstream short-circuit and overload protection provided by appropriate protective devices within the installation.
With a rated conditional short-circuit current of 25 kA, power loss of 2.6 W and dimensions of only 85 × 17.5 × 69 mm, the E201/80G provides substantial switching capacity in a compact format. ABB's E200 design also allows fast removal without dismantling the busbar and supports up to three S2C-H6R auxiliary contacts.
Key Advantages
- High-current single-pole switch disconnector for manual switching and isolation.
- 80 A rated current for demanding modular distribution applications.
- 230 V AC rated voltage for single-phase electrical systems.
- 25 kA conditional short-circuit current.
- Distinctive grey operating lever identifies the G variant.
- Fast removal from the DIN rail without dismantling the connected busbar.
- Supports up to three ABB S2C-H6R auxiliary contacts.
- Compact 17.5 mm single-module width conserves distribution-board space.
Key Features
- ABB E200 modular switch range.
- 1-pole configuration.
- 1 normally open (1NO) contact.
- 80 A rated current.
- 230 V AC rated voltage.
- 50 / 60 Hz rated frequency.
- 25 kA rated conditional short-circuit current.
- 2.6 W power loss at rated operating conditions.
- IP10 degree of protection.
- Grey operating lever with sealable switching positions.
- Captive screws with recessed/slotted Pozidriv size 2 heads.
- Optional locking device helps prevent unauthorised ON/OFF switching.
Reliable High-Current Single-Pole Switching and Isolation
The ABB E201/80G provides a straightforward means of manually switching and isolating a single conductor in an electrical installation. Its 80 A current rating makes it suitable for higher-current applications while retaining a compact 17.5 mm single-module footprint for efficient use of distribution-board space.
The switch disconnector is intended to be used with appropriate upstream short-circuit and overload protection. Installation and maintenance are aided by captive screws and ABB's fast-removal design, while optional S2C-H6R auxiliary contacts can provide supplementary switching-status signalling and a compatible locking accessory can help prevent unauthorised operation.
Typical Applications
- Single-phase electrical distribution boards.
- Industrial switchboards and control panels.
- Manual isolation of higher-current electrical loads.
- Commercial and industrial building electrical systems.
- Machinery and equipment isolation circuits.
- Modular switchgear and power distribution assemblies.
- Maintenance isolation of downstream electrical equipment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Modular Switch Disconnect | |
|---|---|---|
| Mounting Type | DIN rail | |
| Current | 80 A | |
| Poles | 1-pole | |
| Product Series | ABB E200 | |
| Series | E200 | |
| SKU | E20180G | |
| ABB order code | 2CDE281001R1080 | |
| Product type | Switch disconnector | |
| Number of poles | 1P | |
| Contact configuration | 1NO | |
| Rated current | 80 A | |
| Rated voltage | 230 V AC | |
| Minimum rated voltage | 12 V | |
| Rated frequency | 50 / 60 Hz | |
| Rated conditional short-circuit current | 25 kA | |
| Power loss | 2.6 W per pole | |
| Degree of protection | IP10 | |
| Actuator type | Toggle lever | |
| Actuator colour | Grey | |
| Terminal type | Screw terminals | |
| Conductor cross-section | 2.5–50 mm² | |
| Auxiliary contact compatibility | Up to 3 × S2C-H6R | |
| Mounting type | 35 mm DIN rail | |
| DIN rail standard | DIN EN 60715 | |
| Mounting position | Any | |
| Modular width | 1 module | |
| Dimensions (H × W × D) | 85 × 17.5 × 69 mm | |
| Mounting depth | 70 mm | |
| Product weight | 0.095 kg | |
| Operating temperature | -25 to +55 °C | |
| Storage temperature | -40 to +70 °C | |
| Standard | IEC/EN 60947-3 | |
| Approvals | VDE, CCC, EAC, KEMA | |
| EAN | 4016779645737 |
Frequently Asked Questions
What is the ABB E201/80G used for?
The ABB E201/80G is a single-pole switch disconnector designed for manual switching and electrical isolation in distribution boards, switchboards, control panels and other modular electrical installations.
What is the current rating of the ABB E201/80G?
The E201/80G has a rated current of 80 A.
What voltage is the ABB E201/80G rated for?
The single-pole E201/80G has a rated voltage of 230 V AC and a minimum rated voltage of 12 V.
What does the G in E201/80G indicate?
The G identifies the version supplied with a grey operating lever, distinguishing it from the red-lever E201/80R variant.
Can auxiliary contacts be fitted to the ABB E201/80G?
Yes. The E201/80G supports the addition of up to three ABB S2C-H6R auxiliary contacts for supplementary switching-status signalling.
Trusted ABB Manual Circuit Control
ABB E200 modular switch disconnectors combine robust current ratings, compact DIN rail construction and practical installation features to provide dependable manual switching and isolation in professional electrical distribution and control systems.
