Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
OT800E03CP ABB 800A Three-Pole Changeover Switch
ABB OT800E03CP 800 A three-pole manual changeover switch designed for reliable open-transition switching between alternative electrical power sources in industrial and commercial low-voltage distribution systems.
£1,456.14
Why Choose the ABB OT800E03CP 800A Three-Pole Changeover Switch?
The ABB OT800E03CP is a robust 800 A three-pole changeover switch designed for reliable switching between alternative electrical power sources in industrial and commercial low-voltage distribution systems. As part of the ABB OT changeover switch range, it provides a dependable solution for manual power source selection, electrical supply transfer and industrial power distribution applications.
This heavy-duty changeover switch features a three-pole switching arrangement and a mechanically operated changeover mechanism designed to select between two electrical supplies. Its open-transition switching principle provides a defined disconnection between sources during transfer, helping prevent unintended simultaneous connection of independent power supplies.
With a rated current of 800 A, the OT800E03CP is suitable for high-current applications involving mains supply changeover, generator installations, industrial switchboards and power distribution equipment. Its modular construction supports integration into appropriately designed electrical enclosures and switchgear assemblies, making it a practical choice for electrical contractors, panel builders and industrial maintenance engineers.
Key Advantages
- Heavy-duty 800 A changeover switch designed for industrial and commercial electrical distribution.
- Three-pole switching configuration for three-phase electrical power systems.
- Enables controlled selection between two alternative electrical power sources.
- Open-transition switching helps prevent simultaneous connection of independent supplies.
- Suitable for mains-to-generator changeover and alternative power supply selection.
- Robust mechanical construction supports reliable operation in demanding electrical installations.
- Provides a clear mechanical means of selecting the required electrical supply.
- Suitable for integration into industrial switchboards and electrical distribution panels.
- Supports planned maintenance and power source management when incorporated into a correctly designed installation.
- Part of the established ABB OT switch-disconnector and changeover switch family.
Key Features
- ABB OT changeover switch series.
- OT800E03CP model for high-current electrical supply changeover.
- 800 A rated current.
- Three-pole (3P) switching configuration.
- Designed for low-voltage three-phase power distribution systems.
- Manual changeover switching between two alternative supplies.
- Mechanically operated switching mechanism.
- Open-transition changeover operation.
- Suitable for mains and standby generator supply selection.
- Heavy-duty switching construction for industrial electrical applications.
- Designed for installation within suitable electrical enclosures and switchboards.
- Compatible with appropriately selected ABB OT changeover switch operating accessories.
- Suitable for electrical distribution, industrial power control and source selection applications.
- Designed around the requirements of low-voltage switching equipment.
Technical Specifications
- Manufacturer: ABB
- Series: OT Changeover Switches
- Model: OT800E03CP
- ABB order code: OT800E03CP
- Product type: Manual changeover switch
- Product group: OT Changeover Switches
- Rated current: 800 A
- Number of poles: 3
- Pole configuration: 3P
- Switching function: Changeover between two electrical supplies
- Operation type: Manual mechanical operation
- Changeover principle: Open transition
- Supply selection: Source I / Off / Source II
- Electrical system: Low-voltage AC power distribution
- Typical supply arrangement: Three-phase
- Mounting application: Electrical switchboard or enclosure installation
- Construction: Heavy-duty switch-disconnector changeover assembly
- Applicable product standard: IEC/EN 60947-3
Reliable Power Source Changeover for Industrial Distribution Systems
Changeover switches such as the ABB OT800E03CP allow an electrical installation to select between two alternative power sources. A common application is the transfer of an electrical load between a normal mains supply and a standby generator, although the switch can also be incorporated into other suitable dual-supply distribution arrangements.
The OT800E03CP uses a three-pole switching configuration to control the three phase conductors of a power circuit. Its 800 A current rating makes it suitable for substantial industrial and commercial electrical loads, provided the installation is designed within the applicable electrical ratings and operating conditions.
During changeover, the switch uses an open-transition operating principle, meaning the connected load is disconnected from one source before being connected to the alternative source. This break-before-make arrangement is important in installations where independent electrical supplies must not be connected together.
As a manually operated changeover device, the OT800E03CP allows an authorised operator to select the required supply. Automatic transfer operation would require a separately designed and compatible control and operating arrangement; the switch itself should not be treated as a complete automatic transfer switch.
The ABB OT changeover switch family is intended for integration into industrial switchgear and distribution assemblies. Correct selection of operating handles, shafts, terminals, protective devices and enclosure arrangements is important for achieving a safe and reliable installation.
Typical Applications
- Industrial mains-to-generator power supply changeover.
- Commercial building electrical distribution systems.
- Industrial low-voltage switchboards.
- Standby generator installations.
- Alternative electrical supply selection systems.
- Manufacturing and production facilities.
- Industrial plant and machinery power distribution.
- Electrical infrastructure and utility distribution panels.
- Data centre and critical infrastructure power distribution arrangements.
- Large pump stations and industrial processing facilities.
- Electrical maintenance and supply transfer installations.
- OEM switchgear assemblies and industrial panel building.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Manual changeover switch | |
|---|---|---|
| Operation | Manual |
Frequently Asked Questions
What is the ABB OT800E03CP used for?
The ABB OT800E03CP is an 800 A three-pole changeover switch used to select between two alternative electrical power supplies in industrial and commercial low-voltage distribution systems.
What is the rated current of the OT800E03CP?
The OT800E03CP has a rated current of 800 A, making it suitable for high-current electrical supply changeover applications within its specified operating limits.
How many poles does the ABB OT800E03CP have?
The switch has three poles (3P), allowing it to switch the three phase conductors of a suitable three-phase electrical circuit.
Can the OT800E03CP be used for mains-to-generator changeover?
Yes. The ABB OT800E03CP is suitable for mains-to-generator changeover applications where an 800 A three-pole manually operated changeover switch meets the electrical installation requirements.
Is the ABB OT800E03CP an automatic transfer switch?
No. The OT800E03CP is a manually operated changeover switch. Automatic transfer functionality requires a suitable automatic transfer system and compatible operating equipment.
Does the OT800E03CP have an off position?
The switch provides Source I / Off / Source II changeover operation, allowing the connected circuit to be disconnected from both sources in the centre off position.
What is open-transition switching?
Open-transition switching means the load is disconnected from the first electrical supply before being connected to the second supply. This helps prevent simultaneous connection of independent power sources.
Where is the ABB OT800E03CP typically installed?
The OT800E03CP is typically installed within industrial switchboards, electrical distribution panels and suitable low-voltage enclosures as part of a power source changeover arrangement.
Does the OT800E03CP provide overcurrent protection?
No. The changeover switch is intended for power source selection and switching. Appropriate fuses, circuit breakers or other protective devices must be incorporated into the electrical installation as required.
What is the ABB order code for the OT800E03CP?
The ABB manufacturer order code is OT800E03CP, identifying the 800 A three-pole OT changeover switch.
Trusted by Industrial Electrical and Power Distribution Professionals
ABB OT changeover switches provide dependable power source selection for industrial and commercial electrical distribution systems. With robust mechanical switching technology, high-current capability and practical switchboard integration, the OT800E03CP offers an effective solution for engineers, electrical contractors and panel builders requiring reliable 800 A three-pole supply changeover.
