Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
OT315E03CP ABB 315 A 3-Pole Manual Changeover Switch I-0-II
ABB OT315E03CP 315 A three-pole manual changeover switch with I-0-II open-transition operation, 1000 V AC rated operational voltage and included IP65 pistol-type handle for industrial power source selection and generator changeover applications.
£746.64
Why Choose the ABB OT315E03CP 315 A 3-Pole Manual Changeover Switch?
The ABB OT315E03CP is a robust and reliable 315 A, 3-pole manual changeover switch designed for controlled switching between two electrical power sources in industrial and commercial low-voltage distribution systems. As part of the ABB OT manual changeover switch series, it provides a dependable solution for mains-to-generator changeover, alternative power supply selection and industrial electrical distribution applications.
This switch features a three-position I-0-II operating mechanism, allowing operators to select between two electrical supplies with a stable intermediate OFF position. Its open-transition, break-before-make switching principle disconnects the active source before connecting the alternative source, preventing simultaneous connection of the two supplies during normal changeover operation.
With a rated operational current of 315 A, a 3-pole configuration and a rated operational voltage of up to 1000 V AC, the OT315E03CP is suitable for industrial switchboards and power distribution panels. The switch is supplied with a black plastic IP65 pistol-type operating handle, shaft and cable connection bolt set, enabling convenient manual operation from a compatible electrical enclosure.
Key Advantages
- Heavy-duty 315 A manual changeover switch for industrial power distribution.
- 3-pole switching configuration suitable for three-phase electrical installations.
- I-0-II operating positions provide clear selection between two power sources and an OFF position.
- Open-transition switching disconnects one supply before connecting the alternative source.
- 315 A AC-21A and AC-22A operational current rating at voltages up to 415 V AC.
- 160 kW AC-23A operational power rating at 400 V AC.
- IP65-rated pistol-type operating handle suitable for compatible enclosure installations.
- Padlockable OFF position helps prevent unauthorised operation.
- Door interlocking functionality supports controlled access to electrical enclosures.
- Operating handle, shaft and connection bolt set included for convenient installation.
- Compact, base-mounted construction for electrical switchboards and distribution assemblies.
- Part of the established ABB OT manual changeover switch range.
Key Features
- ABB OT315_C manual changeover switch series.
- 315 A rated operational current for AC-21A and AC-22A applications.
- 3-pole switching arrangement.
- I-0-II manual changeover operation.
- Open-transition switching with stable OFF position.
- 1000 V AC rated operational voltage.
- 1000 V rated insulation voltage.
- 12 kV rated impulse withstand voltage.
- 15 kA short-time withstand current for 1 s.
- 160 kW AC-23A operational power rating at 400 V AC.
- Front-operated mechanism positioned at the end of the switch.
- Black plastic IP65 pistol-type operating handle.
- Operating handle padlockable in the OFF position.
- Door interlocking in positions I and II and when padlocked.
- Handle, operating shaft and cable connection bolt set included.
- Base mounting for industrial electrical assemblies.
- Compatible with appropriately selected ABB OT changeover switch accessories.
Technical Specifications
- Manufacturer: ABB
- Series: OT315_C Manual Changeover Switches
- Model: OT315E03CP
- ABB order code: OT315E03CP
- ABB manufacturer product ID: 1SCA022772R6780
- Product group: OT Change over Switches
- Product type: Manual changeover switch
- Rated operational current AC-21A: 315 A at 380–415 V AC
- Rated operational current AC-22A: 315 A at 380–415 V AC
- Rated operational current AC-23A: 315 A at 400–415 V AC
- Rated operational power AC-23A: 160 kW at 400 V AC
- Rated apparent power: 215 kVA at 400 V AC
- Number of poles: 3
- Switching configuration: Three-phase, 3-pole
- Operating positions: I-0-II
- Transition type: Open transition
- Operating method: Manual front operation
- Operating mechanism position: At the end of the switch
- Rated operational voltage: 1000 V AC
- Rated insulation voltage (Ui): 1000 V
- Rated impulse withstand voltage (Uimp): 12 kV
- Rated short-time withstand current (Icw): 15 kA RMS for 1 s
- Conventional free-air thermal current: 315 A at 40 °C
- Conventional enclosed thermal current: 315 A
- Operating handle: Black plastic pistol-type handle
- Handle protection rating: IP65
- Switch body protection rating: IP20 at front
- Handle and shaft: Included
- Cable connection bolt set: Included
- Padlocking: Padlockable in OFF position
- Door interlocking: In positions I and II and when padlocked
- Mounting type: Base mounting
- Terminal arrangement: Top/bottom connections
- Terminal width: 25 mm
- Terminal tightening torque: 30–44 N·m
- Power loss per pole: 6.5 W at rated operating conditions
- Pollution degree: 3
- Dimensions (H × W × D): 185 × 221 × 203 mm
- Net weight: Approximately 5.9 kg
- EAN: 6417019251981
- Applicable standards: IEC 60947 series
Reliable Manual Power Source Changeover for Industrial Distribution Systems
Manual changeover switches such as the ABB OT315E03CP allow electrical installations to transfer between two alternative power sources through a mechanically operated switching mechanism. In a typical mains-to-generator arrangement, position I connects the primary supply, position 0 disconnects both supplies and position II connects the alternative supply. The open-transition design provides a defined break-before-make switching sequence to prevent the two sources from being connected simultaneously during normal operation.
The ABB OT315E03CP is designed for industrial electrical engineers, switchboard manufacturers and power distribution specialists requiring dependable manual source selection. Its three-pole construction enables simultaneous switching of three phase conductors, while its mechanically interlocked I-0-II arrangement provides a clear operating sequence. The included pistol-type handle and shaft enable convenient operation from a compatible switchboard enclosure.
The switch is suitable for integration into generator changeover panels, industrial distribution boards and alternative supply installations. As a manually operated device, it requires an operator to perform the changeover and does not provide automatic mains failure detection or automatic transfer functionality. Suitable upstream protection, conductor sizing and installation arrangements must be selected according to the electrical system requirements.
Typical Applications
- Manual mains-to-generator changeover installations.
- Industrial electrical distribution switchboards.
- Alternative power source selection in commercial buildings.
- Three-phase power distribution systems.
- Industrial manufacturing plants and production facilities.
- Manual switching between two compatible electrical supplies.
- Generator connection and backup power distribution panels.
- Industrial infrastructure and utility distribution assemblies.
- Electrical control and power distribution equipment.
- OEM switchgear assemblies and custom-built changeover panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Manual changeover switch | |
|---|---|---|
| Operation | Manual | |
| Mounting Type | Base mounting |
Frequently Asked Questions
What is the ABB OT315E03CP used for?
The ABB OT315E03CP is a 315 A, 3-pole manual changeover switch used to select between two electrical power sources. Typical applications include mains-to-generator changeover, industrial switchboards and commercial electrical distribution systems.
What is the current rating and pole configuration of the OT315E03CP?
The switch has a rated operational current of 315 A for AC-21A and AC-22A applications at voltages up to 415 V AC and features a 3-pole configuration. It also has an AC-23A operational power rating of 160 kW at 400 V AC.
What do the I-0-II positions mean on this changeover switch?
The I-0-II operating arrangement provides three positions. Position I connects the first power source, position 0 disconnects both sources and position II connects the alternative source. The switch uses an open-transition mechanism to disconnect one supply before connecting the other.
Does the ABB OT315E03CP include an operating handle and shaft?
Yes. The OT315E03CP is supplied with a black plastic IP65 pistol-type operating handle, shaft and cable connection bolt set. The handle can be padlocked in the OFF position, and the switch provides door interlocking in positions I and II and when padlocked.
Is the ABB OT315E03CP an automatic transfer switch?
No. The OT315E03CP is a manually operated changeover switch. An operator must physically select the required switching position. It does not automatically detect a power supply failure or transfer the load between sources without manual intervention.
Trusted by Industrial Switchgear and Power Distribution Professionals
ABB OT manual changeover switches provide dependable power source selection for industrial switchboards, generator installations and commercial electrical distribution systems. With its 315 A current rating, three-pole construction, I-0-II open-transition operation and included IP65 operating handle, the OT315E03CP offers a practical switching solution for electrical engineers, switchgear manufacturers and industrial power distribution specialists.
