Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
OT200E04WCP ABB 200A 4-Pole Manual Change-Over Switch I-0-II Wide Phase Distance
ABB OT200E04WCP 200 A four-pole manual change-over switch featuring I-0-II open-transition operation, wide phase-distance construction, a padlockable IP65 operating handle and rated operational voltage up to 1000 V for industrial power distribution and mains-to-generator changeover applications.
£798.45
Why Choose the ABB OT200E04WCP 200A 4-Pole Change-Over Switch?
The ABB OT200E04WCP is a robust and reliable 200 A four-pole manual change-over switch designed for safe and efficient switching between two electrical power supplies in industrial, commercial and electrical distribution applications. As part of the ABB OT change-over switch series, it provides dependable manual source selection and load isolation for switchboards, distribution panels and industrial control systems.
This switch features a three-position I-0-II operating mechanism, allowing operators to select between two power sources or disconnect the load in the central OFF position. Its open-transition switching mechanism ensures that the first supply is disconnected before the alternative supply is connected, preventing unintended paralleling of the two sources during manual changeover.
With a rated operational current of 200 A, a four-pole switching configuration and a rated operational voltage of up to 1000 V, the OT200E04WCP is suitable for demanding low-voltage power distribution installations. Its wide phase-distance construction, included operating handle and shaft, and robust base-mounted design make it a practical solution for manual mains-to-generator changeover and other dual-supply applications.
Key Advantages
- Heavy-duty 200 A manual change-over switch for industrial and commercial electrical installations.
- Four-pole switching configuration allows simultaneous switching of four conductors.
- Three-position I-0-II operation provides clear source selection and a central OFF position.
- Open-transition switching prevents simultaneous connection of the two power sources.
- Wide phase-distance design provides additional spacing between power connections.
- Black IP65 pistol-type operating handle suitable for appropriately installed panel-door operation.
- Padlockable OFF position supports controlled isolation during maintenance.
- Integrated door interlocking functionality helps prevent unauthorised panel access during operation.
- Handle, shaft and cable connection bolt set included for convenient installation.
- High electrical performance with 200 A AC-23A operational current at 400–415 V AC.
- Durable construction suitable for electrical distribution boards and industrial switchgear assemblies.
Key Features
- ABB OT manual change-over switch series.
- 200 A rated operational current.
- Four-pole (4P) configuration with simultaneous fourth-pole switching.
- I-0-II manual change-over operation.
- Open-transition, break-before-make switching mechanism.
- Wide phase-distance construction for power connections.
- Rated insulation voltage of 1000 V.
- Rated impulse withstand voltage of 12 kV.
- AC-23A operational power rating of 110 kW at 400–415 V AC.
- Rated short-time withstand current of 8 kA for 1 s.
- Black IP65 pistol-type handle with padlocking capability.
- Front-operated mechanism suitable for switchboard door operation.
- Base-mounted installation for electrical panels and switchgear.
- Screw-terminal power connections with a 20 mm terminal width.
- Operating shaft and connection bolts supplied as standard.
- Suitable for manual switching between mains, generator and alternative electrical supplies.
Technical Specifications
- Manufacturer: ABB
- Series: OT Change-Over Switches
- Model: OT200E04WCP
- ABB order code: OT200E04WCP
- ABB catalogue product ID: 1SCA022775R0650
- ABB product group: OT Change over Switches
- Product type: Manual change-over switch
- Rated operational current: 200 A
- Number of poles: 4
- Fourth pole position: Right side
- Fourth pole operation: Simultaneous switching
- Switching positions: I-0-II
- Transition type: Open transition
- Operating mechanism: Manual, front operated
- Phase spacing: Wide phase distance
- Rated operational voltage (Ue): Up to 1000 V
- Rated insulation voltage (Ui): 1000 V
- Rated impulse withstand voltage (Uimp): 12 kV
- Conventional free-air thermal current (Ith): 200 A at 40 °C
- Conventional enclosed thermal current (Ithe): 200 A
- Rated operational current AC-21A: 200 A at 380–415 V AC
- Rated operational current AC-22A: 200 A at 380–415 V AC
- Rated operational current AC-23A: 200 A at 380–415 V AC
- Rated operational current AC-23A at 500 V: 200 A
- Rated operational current AC-23A at 690 V: 200 A
- Rated operational power AC-23A at 400–415 V: 110 kW
- Rated operational power AC-23A at 500 V: 132 kW
- Rated operational power AC-23A at 690 V: 200 kW
- Rated short-time withstand current (Icw): 8 kA for 1 s
- Power loss per pole: 4 W at rated operating conditions
- Switch body front protection rating: IP20
- Operating handle protection rating: IP65 when correctly installed
- Handle type: Pistol-type operating handle
- Handle colour: Black
- Padlocking: Padlockable in OFF position
- Door interlock: Interlocking in I and II positions and when padlocked
- Mounting type: Base mounting
- Operating direction: Front operation
- Terminal type: Screw terminals
- Terminal width: 20 mm
- Terminal tightening torque: 15–22 N·m
- Power connection arrangement: Top or bottom incoming connections
- Pollution degree: 3
- Included operating shaft: OXP6x161
- Included operating handle: OHB65J6E011
- Included connection bolt kit: M8 × 25
- Net weight: approx. 4.4 kg
- Country of origin: Finland
Reliable Manual Power Source Changeover
Manual change-over switches such as the ABB OT200E04WCP enable operators to transfer electrical loads between two separate power supplies. The three-position I-0-II mechanism provides a defined operating sequence, allowing the load to be connected to source I, completely disconnected in position 0, or connected to source II.
The open-transition switching mechanism disconnects the active source before connecting the alternative supply. This makes the switch suitable for appropriately designed mains-to-generator changeover systems, alternative feeder selection and industrial power distribution arrangements where simultaneous connection of two independent sources must be avoided.
The four-pole configuration enables simultaneous switching of four conductors, including a neutral conductor where required by the electrical installation design. The wide phase-distance construction provides additional space around the power terminals, while the included operating shaft and padlockable handle support installation within industrial switchboards and electrical control cabinets. The switch is manually operated and does not provide automatic transfer functionality or overcurrent protection; suitable protective devices and system interlocks must be provided as required by the installation.
Typical Applications
- Manual mains-to-generator changeover systems.
- Industrial and commercial electrical distribution boards.
- Dual power supply selection and transfer systems.
- Generator connection and standby power installations.
- Industrial switchboards and low-voltage switchgear assemblies.
- Manufacturing plants and production facilities.
- Commercial buildings and infrastructure power distribution.
- Electrical maintenance and supply isolation applications.
- Industrial machinery and process control power systems.
- OEM electrical panel building and power distribution equipment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Manual changeover switch | |
|---|---|---|
| Operation | Manual | |
| Mounting Type | Base mounting |
Frequently Asked Questions
What is the ABB OT200E04WCP used for?
The ABB OT200E04WCP is a 200 A four-pole manual change-over switch used to transfer electrical loads between two separate power supplies. Typical applications include mains-to-generator changeover, alternative feeder selection and industrial power distribution systems.
What is the rated current of the ABB OT200E04WCP?
The switch has a rated operational current of 200 A. It is rated for 200 A AC-23A operation at 380–415 V AC, making it suitable for appropriately designed industrial and commercial electrical installations.
How many poles does the ABB OT200E04WCP have?
The OT200E04WCP features a four-pole (4P) configuration. All four poles are switched simultaneously, allowing four conductors to be transferred between two sources where required by the electrical system design.
What does I-0-II mean on this change-over switch?
The I-0-II designation identifies the three manual operating positions. Position I connects the load to the first supply, position 0 disconnects the load from both supplies, and position II connects the load to the second supply.
Can the ABB OT200E04WCP be used for generator changeover?
Yes. The OT200E04WCP is suitable for manual mains-to-generator changeover in correctly designed electrical installations. Its open-transition operation ensures the first source is disconnected before the second source is connected. The switch does not automatically detect power failures or initiate generator starting.
What is the difference between the OT200E04WCP and a standard phase-distance change-over switch?
The OT200E04WCP features a wide phase-distance construction, providing additional spacing between the power connections. This can be beneficial when arranging larger power cables and electrical connections within industrial switchboards.
Does the ABB OT200E04WCP include an operating handle?
Yes. The switch is supplied with a black pistol-type operating handle, operating shaft and cable connection bolt set. The handle provides IP65 protection when correctly installed and can be padlocked in the OFF position.
What is the maximum rated operational voltage?
The ABB OT200E04WCP has a rated operational voltage of up to 1000 V and a rated insulation voltage of 1000 V. Its suitability for a particular installation depends on the applicable utilisation category, voltage and load conditions.
Is the ABB OT200E04WCP an automatic transfer switch?
No. The OT200E04WCP is a manually operated change-over switch. The operator selects the required power source using the I-0-II handle. It does not include an automatic transfer controller or motorised switching mechanism.
Where is the ABB OT200E04WCP typically installed?
The switch is typically base-mounted inside an electrical switchboard, distribution cabinet or industrial control panel, with the operating shaft and handle arranged for manual operation from the front of the enclosure.
Trusted by Electrical Engineers and Industrial Professionals Worldwide
ABB OT manual change-over switches are designed to provide dependable power source selection and electrical isolation in industrial and commercial installations. The OT200E04WCP combines a robust 200 A four-pole switching mechanism, wide phase-distance construction, open-transition operation and a padlockable operating handle to support reliable manual power transfer in demanding electrical distribution systems.
