Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT400E03C (1SCA022764R1950) is a 400 A three-pole manual changeover switch with I-0-II open-transition operation and a left-hand operating mechanism, supplied without an operating handle or shaft for industrial power source selection.
£1,135.37
The ABB OT400E03C (1SCA022764R1950) is a heavy-duty 400 A, three-pole manual changeover switch designed for reliable switching between two electrical supply sources. Part of ABB's OT manual changeover switch range, it provides a practical solution for industrial power distribution, alternative supply selection and electrical installations requiring controlled source changeover.
Featuring a left-hand operating mechanism and I–0–II open-transition operation, the OT400E03C allows an electrical load to be connected to either of two supply sources, with an intermediate OFF position. This break-before-make switching arrangement disconnects the selected supply before connecting the alternative source.
The OT400E03C is supplied without an operating handle or shaft, allowing installers to select compatible ABB operating accessories for the intended panel or enclosure arrangement. It is a switch mechanism for integration into electrical equipment, rather than a complete metal enclosed safety switch.
The ABB OT400E03C provides a mechanically operated method of selecting between two electrical supplies. In position I, the switch connects the first supply to the load. In position 0, the load is disconnected from both supplies. In position II, the switch connects the alternative supply to the load. Its open-transition design ensures that the two sources are not intentionally connected together during changeover.
The three-pole configuration is suited to appropriately designed three-phase electrical systems. With the operating mechanism located at the left end of the switch, the OT400E03C can be incorporated into suitable switchboards, distribution panels and control assemblies where that mechanical layout is required.
Because the switch is supplied without a handle and shaft, these components must be ordered separately and selected for compatibility with the switch and its mounting arrangement. The required enclosure protection rating is determined by the completed installation and its accessories, not by the switch mechanism alone.
The OT400E03C is a manual, non-fused changeover switch. It does not automatically detect supply failure, transfer between sources or provide overcurrent protection. Suitable protective devices, interconnection arrangements and operating procedures must be incorporated into the complete electrical system.
Tick the specs you need, then view products that match.
| Device Type | Enclosed changeover switch |
|---|
The ABB OT400E03C is a 400 A three-pole manual changeover switch used to select between two electrical supply sources in industrial and commercial electrical installations.
The OT400E03C has a 400 A rated current. The applicable operational current must be verified against the supply voltage, switching duty and installation conditions.
The ABB OT400E03C has three switching poles, making it suitable for appropriately designed three-phase supply changeover applications.
I–0–II operation provides three positions: supply I connected, both supplies disconnected in position 0, and supply II connected. This allows manual selection between two electrical sources.
Yes. The OT400E03C uses open-transition switching, meaning the connected supply is disconnected before the alternative supply is connected.
The operating mechanism is positioned at the left end of the switch, corresponding to ABB's 03 pole configuration.
No. The ABB OT400E03C is supplied without an operating handle. A compatible ABB handle must be ordered separately.
No. The operating shaft is not included and must be selected and ordered separately according to the required installation arrangement.
No. The OT400E03C is a changeover switch mechanism intended for integration into suitable electrical equipment or an enclosure. It is not supplied as a complete steel enclosed switch assembly.
The OT400E03C has a rated insulation voltage of 1000 V and a rated impulse withstand voltage of 12 kV.
The switch measures approximately 221 mm wide × 185 mm high × 203 mm deep, with a net weight of approximately 5.9 kg.
Yes. The OT400E03C can be incorporated into a manually operated generator and mains changeover arrangement, provided the electrical system is correctly designed and the switch ratings are suitable.
No. The OT400E03C is a manual changeover switch. It does not automatically monitor the power supplies or transfer the load when a supply fails.
No. The OT400E03C is a non-fused changeover switch. Appropriate overcurrent and short-circuit protective devices must be provided separately.
The OT400E03C is a three-pole changeover switch, while the OT400E04C is a four-pole version. Both are designed for manual I–0–II source selection, with the handle and shaft ordered separately.
ABB OT manual changeover switches are designed for electrical contractors, panel builders, industrial maintenance engineers and power distribution specialists requiring dependable manual selection between electrical supply sources. The ABB OT400E03C (1SCA022764R1950) combines 400 A three-pole switching, I–0–II open-transition operation and a left-hand operating mechanism, with the handle and shaft selected separately to suit the installation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.