Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 2TAM903000R4411 eOVR T2 3L 40-275s three-line Type 2 surge protective device with 40 kA maximum discharge current, 275 V maximum continuous operating voltage and Modbus RS-485 digital monitoring.
£581.23
The ABB eOVR T2 3L 40-275s (2TAM903000R4411) is an intelligent Type 2 surge protective device (SPD) designed to protect three-phase electrical installations and sensitive equipment against transient overvoltages caused by indirect lightning activity and switching events. As part of ABB’s digital eOVR range, it combines proven surge protection with integrated monitoring and communication capabilities for modern electrical distribution systems.
Designed for three protected lines, the eOVR T2 3L 40-275s has a maximum discharge current Imax of 40 kA using an 8/20 µs waveform and a nominal discharge current In of 20 kA. It is rated for a nominal system voltage of 230/400 V AC with a maximum continuous operating voltage Uc of 275 V and provides a voltage protection level Up of 1.8 kV.
Unlike a conventional passive SPD, the ABB eOVR incorporates digital monitoring functionality. The device supports recording of 20 surge events and 10 SPD remote-signal status changes and provides Modbus RS-485 communication, enabling integration with ABB InSite Pro M and ABB Ability solutions for enhanced visibility of surge protection status and electrical installation maintenance.
Type 2 surge protective devices are designed to limit transient overvoltages within electrical installations by diverting surge current away from sensitive downstream equipment. They are commonly installed in distribution boards to protect electrical and electronic equipment from indirect lightning effects and switching transients.
The ABB eOVR range extends this protection with digital monitoring and communication. By recording surge events and SPD status changes and communicating through Modbus RS-485, the eOVR T2 3L 40-275s helps maintenance teams gain greater visibility of the protection system and supports condition-based maintenance in connected electrical installations.
Tick the specs you need, then view products that match.
| Remote Signal | No | |
|---|---|---|
| Device Type | Surge protection device | |
| SPD Type | Type 2 | |
| Poles | 3-pole | |
| Earthing System | TN-C | |
| Series | eOVR | |
| Order code | 2TAM903000R4411 | |
| Product type | Type 2 surge protective device | |
| Product group | Surge Protection Devices | |
| Protected lines | 3 | |
| Nominal system voltage (Un) | 230/400 V AC | |
| Maximum continuous operating voltage (Uc) | 275 V | |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA | |
| Nominal discharge current (In, 8/20 µs) | 20 kA | |
| Voltage protection level (Up) | 1.8 kV | |
| Communication | Modbus RS-485 | |
| Event recording | 20 surge events and 10 SPD remote-signal status changes | |
| Digital integration | ABB InSite Pro M / ABB Ability | |
| Mounting | DIN rail | |
| Standards | IEC 61643-11 / EN 61643-11 |
The ABB eOVR T2 3L 40-275s is a Type 2 surge protective device designed to protect three-phase electrical installations and sensitive equipment against transient overvoltages caused by indirect lightning and switching events.
The device has a maximum discharge current Imax of 40 kA with an 8/20 µs waveform and a nominal discharge current In of 20 kA.
The eOVR T2 3L 40-275s is designed for a nominal system voltage of 230/400 V AC and has a maximum continuous operating voltage Uc of 275 V.
Yes. Its digital monitoring functionality can record 20 surge events and 10 SPD remote-signal status changes, supporting maintenance and condition monitoring.
Yes. The device supports Modbus RS-485 communication and can integrate with ABB InSite Pro M and ABB Ability solutions.
ABB eOVR digital surge protective devices combine Type 2 transient overvoltage protection with event monitoring and communication, helping electrical professionals protect sensitive equipment while gaining greater visibility of surge activity and SPD status.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.