Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 2CTHCTLB5002 HCTLB5002 galvanised-steel ballasted tripod for non-penetrating installation of a 5 m lightning protection mast on flat roofs, specified for wind speeds up to 149 km/h.
£2,299.22
The ABB HCTLB5002 (2CTHCTLB5002) is a heavy-duty ballasted tripod for lightning protection masts, designed to provide a stable, non-penetrating mounting solution on flat roofs. Part of ABB’s external lightning protection range, it enables a mast of up to 5 m in height to be installed without drilling or bonding the tripod to the roof surface.
Manufactured from galvanised steel, the HCTLB5002 combines structural strength with corrosion resistance for exposed rooftop installations. The ballasted arrangement provides the stability required for supporting the mast while helping preserve the integrity of roof membranes and waterproofing systems.
ABB specifies the HCTLB5002 for flat roofs with a maximum gradient of 5% and rates this version for wind speeds of up to 149 km/h. The complete ballasted tripod has a nominal unit weight of approximately 128 kg in ABB’s current external lightning protection catalogue and is supplied as a dedicated roof-mast fixing accessory.
Lightning protection air terminals and their associated masts must remain securely positioned under the environmental loads encountered on exposed rooftops. On flat roofs, penetrative fixings can present additional challenges because drilling may affect waterproofing membranes and the underlying roof construction.
The ABB HCTLB5002 addresses this requirement with a ballasted galvanised-steel tripod that supports a mast of up to 5 m without requiring the tripod to be drilled or bonded to the roof. Its specified wind capability of up to 149 km/h makes it a dedicated ABB solution for appropriately engineered external lightning protection installations.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Type | HCTLB5002 | |
| Order code | 2CTHCTLB5002 | |
| Product type | Ballasted tripod | |
| Product group | Surge Protection Devices / External Lightning Protection | |
| Application | Lightning protection mast support | |
| Maximum mast height | 5 m | |
| Maximum specified wind speed | 149 km/h | |
| Maximum roof gradient | 5% | |
| Material | Galvanised steel | |
| Mounting | Ballasted, non-penetrating flat-roof installation | |
| Weight | approx. 128 kg | |
| EAN | 3660308524430 |
The ABB HCTLB5002 is a ballasted tripod designed to support a lightning protection mast on a flat roof without drilling or bonding the tripod to the roof.
ABB specifies the HCTLB5002 for mounting a lightning protection mast with a height of up to 5 m.
The HCTLB5002 version is specified for wind speeds of up to 149 km/h.
No. The tripod uses a ballasted, non-penetrating mounting arrangement and is designed for installation without drilling or sticking it to the roof.
The HCTLB5002 is designed for flat roofs with a maximum gradient of 5%, subject to the requirements of the complete lightning protection installation.
ABB external lightning protection accessories provide engineered solutions for securing air-terminal assemblies, with the HCTLB5002 offering a galvanised-steel ballasted tripod for non-penetrating installation of 5 m lightning protection masts on flat roofs.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.