Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CTH0TPH2705 ABB TPH2705 Protective Flat for 30 × 2 mm Tape Conductor
ABB 2CTH0TPH2705 TPH2705 2 m galvanised-steel protective flat for shielding 30 × 2 mm lightning protection tape down conductors against mechanical impact.
£43.19
Why Choose the ABB TPH2705 Protective Flat for Tape Conductor?
The ABB TPH2705 (2CTH0TPH2705) is a purpose-designed protective flat for 30 × 2 mm tape conductors used in external lightning protection systems. It provides mechanical protection for the down conductor in exposed areas where accidental impact or physical damage could otherwise compromise the lightning protection installation.
Manufactured from galvanised steel, the TPH2705 is designed as a robust protective covering for flat strip conductors. ABB specifies a length of 2 m, providing substantial protection along the lower section of a lightning protection down conductor.
The protective flat is generally installed between the test joint and ground level, where the down conductor is most susceptible to mechanical impact. It is supplied complete with three fixing clamps, including brackets and wood screws, simplifying installation as part of an ABB external lightning protection system.
Key Advantages
- Purpose-designed mechanical protection for 30 × 2 mm flat tape conductors.
- Protects lightning protection down conductors against accidental impact and physical damage.
- Durable galvanised-steel construction for external lightning protection installations.
- 2 m length provides extensive protection for exposed conductor sections.
- Typically installed between the lightning protection test joint and ground.
- Supplied complete with three fixing clamps for straightforward installation.
- Part of ABB’s established external lightning protection accessory range.
Key Features
- ABB TPH2705 protective flat.
- ABB order code 2CTH0TPH2705.
- Designed to protect 30 × 2 mm flat tape conductors.
- 2 m protective length.
- Galvanised-steel construction.
- Designed for mechanical protection of lightning down conductors.
- Normally positioned between the test joint and ground level.
- Delivered complete with three clamps, brackets and wood screws.
- Listed by ABB as an external lightning protection fixing/protection component.
- EAN 3660308522917.
Reliable Mechanical Protection for Lightning Down Conductors
The lower section of an external lightning protection down conductor can be vulnerable to accidental mechanical damage because it is installed close to ground level. Protecting this section helps preserve the continuity and physical integrity of the conductor so that the lightning protection system remains correctly installed throughout its service life.
The ABB TPH2705 provides a 2 m galvanised-steel protective section specifically intended for flat tape conductors. Installed typically between the test joint and ground, it shields the 30 × 2 mm conductor from mechanical impact while the supplied fixing hardware provides a practical method of securing the protector to the supporting structure.
Typical Applications
- External lightning protection systems.
- Mechanical protection of 30 × 2 mm down-conductor tape.
- Building lightning protection down conductors.
- Installation between lightning protection test joints and ground level.
- Commercial and industrial building lightning protection.
- Factories, warehouses, utilities and infrastructure installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Type | TPH2705 | |
| Order code | 2CTH0TPH2705 | |
| Product type | Protective flat for tape conductor | |
| Product group | Surge Protection Devices / External Lightning Protection | |
| Compatible conductor | 30 × 2 mm flat tape | |
| Length | 2 m | |
| Material | Galvanised steel | |
| Function | Mechanical protection of lightning protection down conductors | |
| Typical installation position | Between test joint and ground | |
| Fixings supplied | 3 clamps with brackets and wood screws | |
| Weight | approx. 1.000 kg per piece | |
| EAN | 3660308522917 |
Frequently Asked Questions
What is the ABB TPH2705 used for?
The ABB TPH2705 is a galvanised-steel protective flat used to protect a lightning protection down conductor against mechanical impact and physical damage.
What conductor size is compatible with the ABB TPH2705?
The TPH2705 is designed to protect a 30 × 2 mm flat tape conductor.
How long is the ABB TPH2705 protective flat?
The protective flat has a length of 2 m, allowing it to cover the exposed lower section of a lightning protection down conductor.
Where is the TPH2705 normally installed?
ABB specifies that the protector is generally positioned between the test joint and the ground, where the down conductor can be vulnerable to mechanical impact.
Are fixings supplied with the ABB TPH2705?
Yes. The protective flat is supplied complete with three clamps incorporating brackets and wood screws for installation.
Trusted Lightning Protection from ABB
ABB external lightning protection accessories provide practical solutions for protecting and securing complete lightning protection installations, with the TPH2705 offering robust galvanised-steel mechanical protection for 30 × 2 mm flat down-conductor tape.
