Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OVR T2 3N 40-275s P QS is a pluggable four-pole Type 2 surge protection device with 40 kA maximum discharge current, 20 kA nominal discharge current, 275 V AC maximum continuous operating voltage and Safety Reserve technology for compatible three-phase plus neutral TT and TN-S electrical systems.
£315.09
The ABB OVR T2 3N 40-275s P QS, order code 2CTB815704R2000, is a pluggable Type 2 surge protection device (SPD) designed to protect three-phase plus neutral low-voltage electrical installations against transient overvoltages caused by indirect lightning and switching events. Part of the ABB OVR QuickSafe range, its 3N configuration provides common- and differential-mode protection for compatible TT and TN-S distribution systems.
The OVR T2 3N 40-275s P QS provides a 20 kA nominal discharge current (In) and 40 kA maximum discharge current (Imax) with an 8/20 µs waveform. It has a maximum continuous operating voltage (Uc) of 275 V AC and an overall voltage protection level (Up) of 1.4 kV, with protection levels of 1.35 kV L-N and 1.3 kV N-PE.
The “s” Safety Reserve design incorporates reserve-varistor functionality so that basic surge protection can remain available when the primary protection stage reaches the end of its service life. Visual status indication and preventive-maintenance functionality support condition monitoring, while the four-pole pluggable construction simplifies servicing within distribution boards.
Type 2 surge protection devices are designed to limit transient overvoltages associated with indirect lightning and switching events in low-voltage electrical networks. ABB's 3N configuration provides protection for three-phase plus neutral systems and is intended for installations where both common-mode and differential-mode transient protection is required, including compatible TT and TN-S networks.
The ABB OVR T2 3N 40-275s P QS combines a 40 kA maximum 8/20 µs discharge current with Safety Reserve technology. Rather than completely removing surge protection when the primary protection stage reaches end of life, the reserve-varistor concept maintains a basic level of protection until replacement can be carried out, while the visual status and preventive-maintenance functions help indicate when attention is required.
Tick the specs you need, then view products that match.
| Remote Signal | No | |
|---|---|---|
| SPD Type | Type 2 | |
| Poles | 3-pole + N | |
| Earthing System | TN-S, TT | |
| Device Type | Surge protection device | |
| Impulse Current Iimp (kA) | 2 kA | |
| Series | OVR T2 QuickSafe | |
| Order code / MPN | 2CTB815704R2000 | |
| EAN | 3660308525321 | |
| Product group | Surge Protection Devices | |
| Product type | Type 2 surge protection device | |
| SPD classification | Type 2 / Class II | |
| Configuration | 3N | |
| Number of poles | 4 | |
| Low-voltage distribution systems | TT, TN-S | |
| Maximum continuous operating voltage (Uc) | 275 V AC | |
| Nominal discharge current (In, 8/20 µs) | 20 kA | |
| Maximum discharge current (Imax, 8/20 µs) | 40 kA | |
| Impulse current (Iimp, 10/350 µs) | 2 kA | |
| Voltage protection level (Up) | 1.4 kV | |
| Voltage protection level (L-N) | 1.35 kV | |
| Voltage protection level (N-PE) | 1.3 kV | |
| Rated service short-circuit breaking capacity (Ics) | 100 kA | |
| Safety Reserve | Yes | |
| Preventive-maintenance function | Yes | |
| Status indicator | Yes | |
| Remote signalling | No | |
| Mounting type | 35 mm DIN rail | |
| Module width | 4 modules | |
| Protection rating | IP20 | |
| Standards | IEC 61643-11 / EN 61643-11 | |
| Dimensions (H × W × D) | 88 × 71.2 × 76.7 mm | |
| Construction | Pluggable |
The ABB OVR T2 3N 40-275s P QS is a four-pole Type 2 surge protection device designed to protect compatible three-phase plus neutral TT and TN-S low-voltage electrical installations against transient overvoltages caused by indirect lightning and electrical switching events.
The device has a 20 kA nominal discharge current (In) and a 40 kA maximum discharge current (Imax), measured using an 8/20 µs waveform. ABB also specifies a 2 kA impulse current (Iimp) with a 10/350 µs waveform.
The SPD has an overall voltage protection level (Up) of 1.4 kV, with ABB specifying 1.35 kV between L-N and 1.3 kV between N-PE.
ABB's Safety Reserve technology uses an additional protection stage so that basic surge protection can remain available when the primary protection stage reaches the end of its service life, providing time for planned replacement.
No. The OVR T2 3N 40-275s P QS provides local status indication and preventive-maintenance functionality but does not include the auxiliary remote signalling contacts fitted to ABB variants carrying the TS designation.
ABB OVR Type 2 surge protection devices are designed to help protect low-voltage electrical distribution systems against transient overvoltages, with QuickSafe, Safety Reserve and pluggable technologies supporting effective protection and planned maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.