Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB F402A-25/0.01 is a 25 A two-pole Type A residual current circuit breaker with 10 mA residual-current sensitivity and 230 V AC operation, designed for the SMISSLINE TP plug-in system.
£108.54
The ABB F402A-25/0.01 is a 2-pole Type A residual current circuit breaker (RCCB) designed to provide sensitive residual-current protection within the ABB SMISSLINE TP plug-in system. Rated at 25 A with a 10 mA residual operating current, it is intended for applications requiring a high level of protection against earth leakage and residual currents.
Its Type A residual-current characteristic detects sinusoidal alternating residual currents as well as pulsating DC residual currents, making it suitable for a broad range of residential, commercial and industrial electrical installations. The F402A-25/0.01 operates instantaneously and is designed in accordance with IEC/EN 61008.
The F402A-25/0.01 combines a 230 V AC rated operational voltage, 50–60 Hz frequency range and compact two-module construction with ABB's SMISSLINE TP plug-in mounting system. This allows the RCCB to be integrated efficiently into compatible distribution assemblies while providing dependable residual-current protection.
Residual current circuit breakers monitor the balance of current flowing through the live conductors and disconnect the circuit when residual current exceeds the device's operating threshold. The ABB F402A-25/0.01 has a particularly sensitive 10 mA residual-current rating, making it suitable for compatible applications where enhanced residual-current protection is required.
As a Type A RCCB, the F402A-25/0.01 responds to sinusoidal alternating residual currents and pulsating DC residual currents. Its plug-in contacts also provide the installation advantages of the SMISSLINE TP architecture, allowing compatible residual-current devices to be integrated efficiently into modular residential, commercial and industrial distribution systems.
| Product group | SMISSLINE Plug-in System |
|---|---|
| Series | F400 / F402 |
| ABB type designation | F402 25 A10 |
| ABB order code | 2CSF502110R0250 |
| EAN / GTIN | 8012542037033 |
| Product type | Residual current circuit breaker (RCCB) |
| Number of poles | 2 |
| Residual-current type | Type A |
| Rated current | 25 A |
| Rated residual current | 10 mA |
| Operating characteristic | Instantaneous |
| Rated voltage | 230 V |
| Rated operational voltage | 230 V AC |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Rated frequency | 50–60 Hz |
| Rated service short-circuit breaking capacity Ics | 1 kA |
| Maximum surge current | 0.25 kA |
| Protection rating | IP20 |
| Pollution degree | 2 |
| Rated conductor cross-section | 0–25 mm² |
| Operating temperature | -25 to +55 °C |
| Width | 35 mm / 2 modules |
| Height | 85 mm |
| Depth | 69 mm |
| Mounting type | Plug-in |
| Standard | IEC/EN 61008 |
| Net weight | approx. 200 g |
The ABB F402A-25/0.01 is a 2-pole Type A RCCB used to provide residual-current protection in compatible single-phase electrical circuits within the SMISSLINE TP plug-in system.
The F402A-25/0.01 has a rated residual operating current of 10 mA, providing highly sensitive detection of residual and earth-leakage currents.
Type A means the RCCB is designed to respond to sinusoidal alternating residual currents and pulsating DC residual currents, providing protection for a wider range of electrical loads than an AC-only residual-current device.
The ABB F402A-25/0.01 has a rated current of 25 A and is designed for 230 V AC operation.
The F402A-25/0.01 is an RCCB designed primarily for residual-current protection. Appropriate overcurrent and short-circuit protection must therefore be provided by a suitably rated protective device as required by the electrical installation design.
ABB SMISSLINE TP residual-current devices combine dependable electrical protection with a modular plug-in architecture, supporting efficient residential, commercial and industrial distribution systems while simplifying installation and device replacement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.