Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA204 A-63/0.5 AE is a four-pole 63 A Type A RCD block with 500 mA residual-current sensitivity for detecting sinusoidal AC and pulsating DC residual currents.
£246.98
The ABB DDA204 A-63/0.5 AE is a four-pole Type A residual current device (RCD) block from the ABB DDA200 range, designed for assembly with compatible ABB miniature circuit breakers. It provides residual-current protection for multi-pole electrical distribution circuits while allowing residual-current and overcurrent protection functions to be combined in a modular assembly.
As a Type A device, the DDA204 A-63/0.5 AE is designed to detect sinusoidal alternating residual currents and pulsating DC residual currents. Its 500 mA rated residual operating current makes it suitable for applications specified for earth-leakage and fault protection at this sensitivity.
With a 63 A rated current and four-pole configuration, this DDA200 RCD block is suited to commercial, industrial and building electrical distribution systems. When correctly combined with a compatible ABB miniature circuit breaker, the assembly adds residual-current protection while the associated MCB provides overcurrent and short-circuit protection.
Residual current protection operates by monitoring the balance of current flowing through the active conductors of a circuit. When an insulation fault or leakage path causes current to flow to earth, an imbalance can be detected so that disconnection can take place when the RCD block is correctly assembled with its compatible circuit breaker.
The Type A characteristic enables the DDA204 A-63/0.5 AE to respond to both sinusoidal alternating and pulsating DC residual currents. Its 500 mA sensitivity is intended for applications requiring earth-leakage and fault protection at this level, while the associated miniature circuit breaker supplies the required overcurrent and short-circuit protection.
| Series | DDA200 |
|---|---|
| ABB order code | 2CSB204701R4630 |
| Product type | Residual current device (RCD) block |
| Residual-current type | A |
| Variant | AE |
| Number of poles | 4 |
| Rated current | 63 A |
| Rated residual operating current | 500 mA |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Applicable standard | IEC/EN 61009 Annex G |
| Mounting | DIN rail as part of a compatible modular circuit protection assembly |
It is a four-pole Type A RCD block designed to provide residual-current protection when correctly assembled with a compatible ABB miniature circuit breaker.
The ABB DDA204 A-63/0.5 AE has a rated current of 63 A.
It has a rated residual operating current of 500 mA, making it suitable for applications specified for earth-leakage and fault protection at this sensitivity.
Type A residual-current protection is designed to detect sinusoidal alternating residual currents and pulsating DC residual currents.
No. It is an RCD block designed for combination with a compatible ABB miniature circuit breaker. The RCD block provides residual-current protection while the associated MCB provides overcurrent and short-circuit protection.
ABB DDA200 residual current device blocks provide a modular solution for integrating residual-current protection with compatible miniature circuit breakers in commercial, industrial and building electrical distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.