Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA204 A S-63/0.5 is a four-pole 63 A Type A selective RCD block with 500 mA residual-current sensitivity for coordinated protection against sinusoidal AC and pulsating DC residual currents.
£147.26
The ABB DDA204 A S-63/0.5 is a four-pole Type A selective residual current device (RCD) block designed for assembly with compatible ABB miniature circuit breakers. Part of the ABB DDA200 RCD block series, it combines Type A residual-current detection with selective operation for coordinated protection in electrical distribution systems.
This RCD block detects sinusoidal alternating residual currents and pulsating DC residual currents. Its 500 mA rated residual operating current and selective S-type characteristic make it suitable for earth leakage and fault protection where coordination between upstream and downstream residual-current protective devices is required.
With a 63 A rated current and four-pole configuration, the DDA204 A S-63/0.5 is suited to commercial, industrial and building distribution systems requiring selective Type A residual-current protection. When combined with a compatible ABB miniature circuit breaker, the assembly provides residual-current protection alongside the MCB's overcurrent and short-circuit protection.
Residual current devices monitor the balance of current flowing through the active conductors of an electrical circuit. If an insulation fault or leakage path causes current to flow to earth, the resulting imbalance can initiate disconnection when the RCD block is correctly combined with its compatible circuit breaker.
The selective S-type characteristic provides intentional time-delayed operation to support discrimination between upstream and suitable downstream residual-current protective devices. Combined with Type A sensitivity to sinusoidal AC and pulsating DC residual currents, the DDA204 A S-63/0.5 is suited to coordinated distribution systems where selective residual-current protection is required.
| Series | DDA200 |
|---|---|
| ABB order code | 2CSB204201R4630 |
| Product type | Residual current device (RCD) block |
| Residual-current type | A |
| Operating characteristic | Selective, S type |
| Number of poles | 4 |
| Rated current | 63 A |
| Rated residual operating current | 500 mA |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Applicable standard | IEC/EN 61009 Annex G |
| Mounting | DIN rail as part of a compatible modular circuit protection assembly |
It is a four-pole Type A selective RCD block designed to provide residual-current protection and support coordination with suitable downstream protective devices when combined with a compatible ABB miniature circuit breaker.
The ABB DDA204 A S-63/0.5 has a rated current of 63 A.
It has a rated residual operating current of 500 mA.
The S designation indicates selective, time-delayed operation, supporting coordination between an upstream RCD and suitable downstream residual-current protective devices.
Type A protection is designed to detect sinusoidal alternating residual currents and pulsating DC residual currents.
ABB DDA200 residual current device blocks provide a modular solution for integrating residual-current protection with compatible miniature circuit breakers, with selective S-type variants supporting coordinated protection in commercial, industrial and building distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.