Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA203B630.3APR is a three-pole Type B AP-R DDA200 residual current device block rated at 63 A with 300 mA residual current sensitivity and enhanced immunity for commercial and industrial installations containing electronic equipment.
£755.51
The ABB DDA203B630.3APR is a high-performance Type B residual current device (RCD) block designed to provide residual current protection when assembled with compatible ABB miniature circuit breakers. As part of the advanced ABB DDA200 RCD series, this three-pole device is specifically designed for installations containing electronic equipment where comprehensive residual current detection and dependable immunity against unwanted tripping are required.
This RCD block has a rated current of 63 A and a rated residual operating current of 300 mA. Its Type B residual current characteristic extends protection beyond conventional AC and Type A devices by providing sensitivity to residual currents associated with electronic equipment, including smooth DC residual currents.
The DDA203B630.3APR incorporates ABB's AP-R high-immunity characteristic with a 10 ms delay, helping reduce unwanted tripping caused by transient disturbances. With a three-pole configuration, 230–400 V AC rated voltage and compatibility with ABB S200 series and S300P miniature circuit breakers, it is well suited to tertiary and industrial electrical installations.
Type B residual current protection is designed for installations where electronic equipment can generate residual currents that conventional AC or Type A devices may not fully detect. The ABB DDA203B630.3APR therefore provides an appropriate protection solution for demanding commercial and industrial systems containing power-electronic equipment.
The AP-R high-immunity characteristic incorporates a short operating delay to improve resistance to transient disturbances and reduce nuisance tripping. When assembled with a compatible ABB miniature circuit breaker, the DDA203B630.3APR forms a coordinated solution combining residual current detection with the associated circuit breaker's overcurrent and short-circuit protection.
| Series | DDA200 |
|---|---|
| SKU | DDA203B630.3APR |
| ABB order code | 2CSB203592R3630 |
| EAN | 8012542732327 |
| Product type | Residual current device (RCD) block |
| Residual current type | Type B |
| Operating characteristic | AP-R high immunity, 10 ms delay |
| Rated current | 63 A |
| Rated residual current | 300 mA |
| Rated voltage | 230–400 V AC |
| Rated operational voltage | 400 V AC |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Number of poles | 3 |
| Rated frequency | 50–60 Hz |
| Maximum surge current | 3 kA |
| Power loss | 7.6 W |
| Electrical endurance | 10,000 cycles |
| Protection rating | IP2X |
| Operating ambient temperature | -25 to +55 °C |
| Conductor connection capacity | up to 25 mm² |
| Reference standards | IEC/EN 61009 Annex G, IEC/EN 62423 |
| Dimensions (W × H × D) | approx. 122.5 × 93 × 69 mm |
| Weight | approx. 318 g |
The ABB DDA203B630.3APR is a three-pole RCD block designed for assembly with compatible ABB miniature circuit breakers to provide Type B residual current protection in commercial and industrial installations, particularly those containing electronic equipment.
The DDA203B630.3APR has a rated current of 63 A and a rated residual operating current of 300 mA.
Type B residual current protection is designed to detect a broad range of residual current waveforms, including smooth DC residual currents that can occur in installations containing electronic power equipment.
The AP-R characteristic is a high-immunity design intended to reduce unwanted tripping caused by transient disturbances. This model has a 10 ms delay and a maximum surge current resistance of 3 kA.
The DDA203B630.3APR is suitable for assembly with compatible ABB S200 series and S300P miniature circuit breakers to create a combined residual-current and overcurrent protection solution.
ABB DDA200 Type B residual current blocks provide advanced protection for commercial and industrial installations containing electronic equipment, combining broad residual current detection with dependable compatibility across ABB's modular circuit protection range.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.