Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA203 AC-25/0.03 is a 3-pole Type AC residual current device block rated at 25 A with 30 mA sensitivity and 230/400 V AC operation for residential, commercial and industrial circuit protection.
£112.80
The ABB DDA203 AC-25/0.03 is a 3-pole Type AC residual current device (RCD) block designed for assembly with compatible ABB miniature circuit breakers. Part of the ABB DDA200 RCD series, it combines a 25 A rated current with sensitive 30 mA residual-current protection for residential, commercial and industrial electrical installations.
Its Type AC characteristic responds to sinusoidal alternating earth fault currents. With a rated residual current of 30 mA, the DDA203 AC-25/0.03 provides protection against indirect contact together with additional protection against direct contact when correctly selected and installed as part of the electrical protection system.
The DDA203 is designed for on-site assembly with compatible ABB S200 series and S300P miniature circuit breakers. The resulting assembly combines residual-current protection from the DDA200 block with overload and short-circuit protection from the associated circuit breaker, providing a compact modular protection solution.
Type AC residual-current devices are designed to detect sinusoidal alternating earth fault currents. The ABB DDA203 AC-25/0.03 therefore provides residual-current protection for circuits where the connected loads and applicable installation requirements permit the use of Type AC protection.
Its 30 mA sensitivity provides protection against indirect contact and additional protection against direct contact. When assembled with a compatible ABB miniature circuit breaker, the DDA203 forms a coordinated protection arrangement combining residual-current detection with overload and short-circuit protection.
| Series | DDA200 |
|---|---|
| SKU | DDA203AC250.03 |
| Order code | 2CSB203001R1250 |
| EAN | 8012542792505 |
| Product type | Residual current device (RCD) block |
| Residual-current type | Type AC |
| Leakage current type | AC |
| Number of poles | 3 |
| Rated current | 25 A |
| Rated residual current | 30 mA |
| Rated voltage | 230/400 V AC |
| Rated operational voltage | 230/400 V AC |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Operating characteristic | Instantaneous |
| Residual-current waveform | Sinusoidal AC |
| Power loss | 3 W |
| Electrical endurance | 10,000 cycles |
| Degree of protection | IP2X |
| Standard | IEC/EN 61009 Annex G |
| Modular width | 5 DIN modules |
| Dimensions (W × H × D) | 122 × 93 × 76 mm |
| Catalogue weight | 0.22 kg |
The DDA203 AC-25/0.03 is a 3-pole Type AC RCD block designed for assembly with compatible ABB miniature circuit breakers to provide 30 mA residual-current protection in residential, commercial and industrial electrical installations.
The device has a rated residual current of 30 mA, providing sensitive earth leakage detection, protection against indirect contact and additional protection against direct contact.
Type AC means the RCD block is designed to respond to sinusoidal alternating residual currents. The suitability of Type AC protection should be determined according to the connected equipment and applicable electrical installation requirements.
The DDA203 AC-25/0.03 has a rated and rated operational voltage of 230/400 V AC and a rated frequency of 50–60 Hz.
No. The DDA203 AC-25/0.03 is an RCD block designed for assembly with a compatible ABB miniature circuit breaker. The DDA203 provides residual-current protection, while the associated circuit breaker provides overload and short-circuit protection.
ABB DDA200 residual current device blocks provide modular earth leakage protection for residential, commercial and industrial installations, combining with compatible ABB miniature circuit breakers to create coordinated residual-current, overload and short-circuit protection assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.