Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB DDA202ACS630.1 DDA202 AC S-63/0.1 is a 2-pole 63 A 100 mA Type AC selective residual current device block designed for coordinated earth-fault protection with compatible ABB miniature circuit breakers.
£127.41
The ABB DDA202ACS630.1, manufacturer type DDA202 AC S-63/0.1, is a 2-pole Type AC selective residual current device (RCD) block designed for combination with compatible ABB miniature circuit breakers. Part of the ABB DDA200 RCD series, it provides time-delayed residual-current protection for electrical distribution systems where coordination with downstream residual-current devices is required.
The DDA202 AC S-63/0.1 is designed to detect sinusoidal alternating residual currents. Its selective S characteristic introduces an intentional operating delay, supporting discrimination with suitable downstream instantaneous RCDs so that a local earth fault can be disconnected by the protective device closest to the fault.
With a rated current of 63 A, a rated residual operating current of 100 mA and a 2-pole configuration, the DDA202ACS630.1 is suited to electrical distribution applications requiring selective Type AC residual-current protection. Its modular DDA200 design enables combination with compatible ABB miniature circuit breakers to provide coordinated residual-current and overcurrent protection.
Selective residual-current protection is used to coordinate upstream and downstream protective devices within an electrical distribution system. The intentional operating delay of the ABB DDA202 AC S-63/0.1 allows a suitable downstream instantaneous RCD to respond first to a local earth fault, helping limit disconnection to the affected part of the installation.
As a Type AC device, the DDA202ACS630.1 is intended to detect sinusoidal alternating residual currents. Combined with a compatible ABB miniature circuit breaker, its modular DDA200 construction provides residual-current protection alongside overload and short-circuit protection in a coordinated assembly.
| Series | DDA200 |
|---|---|
| SKU | DDA202ACS630.1 |
| ABB order code | 2CSB202901R2630 |
| Product type | Selective residual current device block / RCD block |
| Residual-current type | Type AC |
| Operating characteristic | Selective (S) |
| Number of poles | 2 |
| Rated current | 63 A |
| Rated residual operating current | 100 mA |
| Rated voltage | 230/400 V AC |
| Rated frequency | 50–60 Hz |
| Rated insulation voltage | 500 V |
| Rated impulse withstand voltage | 4 kV |
| Protection rating | IP2X |
| Standard | IEC/EN 61009 Annex G |
The ABB DDA202ACS630.1 is a selective Type AC RCD block designed for combination with compatible ABB miniature circuit breakers to provide coordinated residual-current protection in electrical distribution systems.
The ABB DDA202 AC S-63/0.1 has a rated current of 63 A.
The DDA202 AC S-63/0.1 has a rated residual operating current of 100 mA.
The selective S characteristic provides intentional time-delayed operation, helping coordinate the upstream RCD block with suitable downstream instantaneous residual-current devices.
As a Type AC device, it is designed to respond to sinusoidal alternating residual currents.
ABB DDA200 selective residual current device blocks provide coordinated earth-fault protection for electrical distribution systems, helping achieve discrimination between upstream and downstream protective devices.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.