Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB S754DR-K80 is an 80 A four-pole Type K selective main circuit-breaker rated at 400 V AC with 25 kA ultimate short-circuit breaking capacity for reliable electrical distribution protection.
£366.82
The ABB S754DR-K80 is a high-performance four-pole selective main circuit-breaker (SMCB) designed for reliable overcurrent and short-circuit protection in electrical distribution systems where selectivity and continuity of supply are important. As part of the ABB S750 DR series, it is designed for use as a group or upstream protective circuit-breaker in main distribution boards, switchgear and other demanding electrical installations.
This selective circuit-breaker combines a Type K selective tripping characteristic with energy-limiting fault protection to support coordination with upstream and downstream protective devices. The S750 DR design is voltage-independent and requires no auxiliary energy for switching or its protective function, helping ensure dependable operation regardless of supply disturbances or network configuration.
With a rated current of 80 A, a four-pole configuration and a rated ultimate short-circuit breaking capacity of 25 kA at 400 V AC, the S754DR-K80 is suitable for high-current three-phase distribution applications. Its DIN rail mounting format enables straightforward integration into compatible electrical distribution boards and switchgear assemblies.
Selective main circuit-breakers such as the ABB S754DR-K80 are designed to coordinate protection across electrical distribution systems so that faults can be isolated as close as possible to their source. The S750 DR uses energy limitation during fault conditions to support selectivity with other protective devices, helping unaffected sections of an installation remain operational when a downstream fault occurs.
The S754DR-K80 combines an 80 A current rating, four-pole protection, a Type K selective characteristic and 25 kA Icu at 400 V AC. Its voltage-independent operation and suitability for isolation make it well suited to main distribution and switchgear applications where dependable protection and high system availability are required.
| Series | S750 DR |
|---|---|
| Product group | S800 / S800P / S750 MCB |
| Order code | 2CDH784010R0627 |
| EAN | 4016779879941 |
| Product type | Selective main circuit-breaker (SMCB) |
| Number of poles | 4 |
| Rated current | 80 A |
| Tripping characteristic | K (selective) |
| Rated operational voltage | 400 V AC |
| Rated frequency | 50 / 60 Hz |
| Rated ultimate short-circuit breaking capacity (Icu) | 25 kA at 400 V AC |
| Rated service short-circuit breaking capacity (Ics) | 12.5 kA at 400 V AC |
| Rated insulation voltage (Ui) | 690 V |
| Rated impulse withstand voltage (Uimp) | 6 kV at 2,000 m |
| Dielectric test voltage | 2 kV, 50 / 60 Hz for 1 minute |
| Protection rating | IP20 / IP40 in enclosure with cover |
| Overvoltage category | IV |
| Operating temperature | -25 to +55 °C |
| Storage temperature | -40 to +70 °C |
| Mounting type | DIN rail |
| DIN rail compatibility | TH35-7.5 / TH35-15 according to IEC 60715 |
| Terminal type | Cable-clamp screw terminal |
| Conductor capacity | 2.5–50 mm² |
| Tightening torque | 3 N·m |
| Weight | approx. 1.45 kg |
| Standard | IEC / EN 60947-2 |
The ABB S754DR-K80 is a four-pole selective main circuit-breaker used for overcurrent and short-circuit protection in electrical distribution systems where selective coordination and high continuity of supply are required.
The S754DR-K80 has a rated current of 80 A and uses a Type K selective tripping characteristic.
The S754DR-K80 has a rated ultimate short-circuit breaking capacity of 25 kA at 400 V AC and a rated service short-circuit breaking capacity of 12.5 kA at 400 V AC.
The Type K characteristic is suitable for circuits containing equipment with elevated starting or inrush currents while still providing dependable overload and short-circuit protection.
The S754DR-K80 is designed for DIN rail mounting and is compatible with TH35-7.5 and TH35-15 mounting rails according to IEC 60715 for integration into electrical distribution boards and switchgear.
ABB S750 DR selective main circuit-breakers provide dependable overcurrent and short-circuit protection for demanding electrical distribution systems, combining selective coordination, voltage-independent operation and high short-circuit performance to support continuity of supply.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.