Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB OT630KLUU6BZ (1SCA022834R1260) is an OT630 frame six-pole steel enclosed switch disconnector with a 570 A AC-23A operational current rating, 315 kW motor-load switching capability at 415 V AC, IP65 protection, a black padlockable pistol handle, blank cable entries and neutral and protective earth terminals.
£4,094.88
The ABB OT630KLUU6BZ (ABB product ID 1SCA022834R1260) is a heavy-duty 630 A class, 6-pole steel enclosed switch disconnector designed for reliable manual load switching and electrical isolation in demanding industrial low-voltage installations. Part of ABB's established OT enclosed switch-disconnector range, this assembly combines a galvanised sheet-steel enclosure, black pistol-type operating handle, blank cable entry arrangements and IP65 ingress protection.
Designed for industrial applications requiring simultaneous switching of six conductors, the OT630KLUU6BZ provides a 570 A AC-23A operational current rating at 415 V AC and a corresponding 315 kW AC-23A motor-load switching rating. At 690 V AC, ABB's enclosed switch-disconnector catalogue specifies a 570 A operational current rating and 560 kW motor-load switching capability. The six-pole configuration is particularly useful for installations requiring two groups of three conductors to be disconnected by one operating mechanism.
The switch is supplied in a substantial 1000 × 800 × 230 mm steel enclosure with blank top and bottom cable entry areas. Its galvanised construction and polyester coating provide robust protection, while the black padlockable pistol handle, interlocked enclosure cover, neutral and protective earth terminals support practical installation and maintenance. With a catalogue unit weight of 52 kg, the OT630KLUU6BZ offers a high-capacity enclosed isolation solution for industrial electrical contractors, machinery manufacturers and power distribution specialists.
The ABB OT630KLUU6BZ provides a dependable means of manually disconnecting high-current industrial electrical equipment from its power supply. Its six mechanically linked switching poles operate together, allowing six conductors to be disconnected using a single operating handle. This makes it particularly useful for applications involving two groups of three-phase conductors or other appropriately designed six-pole switching arrangements.
Although the model belongs to ABB's OT630 nominal frame class, the enclosed assembly has a 570 A rated continuous current. ABB's enclosed switch-disconnector catalogue also specifies a 570 A AC-23A operational current rating at 415 V AC, corresponding to a maximum motor-load switching capability of 315 kW. At 690 V AC, the catalogue specifies 570 A and 560 kW. The operational current and utilisation category should be used when determining suitability rather than relying solely on the nominal frame designation.
The IP65 galvanised steel enclosure provides substantial mechanical and environmental protection. Its polyester coating helps protect the enclosure in demanding industrial environments, while the IP65 classification provides dust-tight protection and resistance to water jets when all cable entries and enclosure seals are correctly installed.
A distinguishing feature of the OT630KLUU6BZ is its blank top and bottom cable entry arrangement. Rather than supplying predefined cable entry openings, the enclosure allows installers to prepare suitable openings according to the required cable sizes, glands and routing arrangements. This is particularly useful where the six-pole configuration requires several large incoming and outgoing conductors.
The enclosure is designed to accommodate suitable single and parallel cable arrangements, subject to the manufacturer's terminal and connection requirements. Cable glands, flange accessories and other entry components must be selected separately. The blank cable entry areas are also associated with the enclosure's fixing arrangement, so installation preparation must follow ABB's mounting instructions.
The black pistol-type operating handle provides clearly identified ON and OFF positions and supports padlocking with up to three padlocks. This helps operators establish controlled maintenance isolation procedures. The enclosure cover is mechanically interlocked with the operating mechanism, helping restrict normal access to internal connections while the switch is ON.
A defeatable cover interlock is provided for controlled access by authorised personnel under appropriate electrical safety procedures. The enclosure also incorporates pressure-relief provision intended to help manage internal pressure during an electrical fault. These features complement the assembly's protective design but do not eliminate the need for suitable fault protection and safe working practices.
The assembly includes neutral and protective earth terminals, while the enclosure door is earthed through its hinges. The six main switching poles provide the electrical switching function; the neutral terminal is a separate connection provision and should not be assumed to represent an additional switching pole.
No auxiliary contacts are fitted as standard, but compatible accessories can be installed where switch-position indication or control-system feedback is required. ABB's catalogue specifies a maximum auxiliary contact configuration of 4 normally open and 2 normally closed contacts for this model.
As a switch disconnector, the OT630KLUU6BZ provides manual load switching and electrical isolation rather than automatic overload or short-circuit protection. Appropriate upstream protective devices must be selected according to the electrical installation's fault level, connected load and manufacturer's coordination requirements.
Tick the specs you need, then view products that match.
| Device Type | Enclosed switch disconnector | |
|---|---|---|
| Material | Steel |
The ABB OT630KLUU6BZ is a six-pole steel enclosed switch disconnector designed for manual load switching and electrical isolation in industrial low-voltage installations. It is suitable for applications requiring simultaneous disconnection of six conductors.
The OT630KLUU6BZ belongs to ABB's OT630 nominal frame class, but its enclosed assembly has a 570 A rated continuous current and a 570 A AC-23A operational current rating at 415 V AC. The correct operational rating should be used when selecting the switch.
ABB specifies a 570 A AC-23A operational current rating at 415 V AC and 570 A at 690 V AC. The suitability of the switch depends on the connected load, operating voltage and utilisation category.
The switch has a maximum AC-23A motor-load switching rating of 315 kW at 415 V AC and 560 kW at 690 V AC, according to ABB's enclosed switch-disconnector catalogue.
The OT630KLUU6BZ has 6 mechanically linked switching poles, allowing simultaneous disconnection of six electrical conductors through one operating mechanism.
The OT630KLUU6BZ has an IP65 ingress protection rating. When correctly installed with suitable cable glands and enclosure sealing, it provides dust-tight protection and resistance to water jets.
The enclosure is manufactured from galvanised sheet steel with a polyester coating, providing robust mechanical construction and environmental protection for industrial electrical installations.
Yes. The OT630KLUU6BZ is supplied with blank top and bottom cable entry areas, allowing installers to prepare openings for suitable cable glands and routing arrangements.
No. Cable glands and flange accessories must be ordered separately and selected according to the required cable sizes, entry arrangements and installation conditions.
The enclosure is designed for single and parallel cable arrangements, subject to the manufacturer's approved connection methods, terminal capacities and installation clearances.
The switch is supplied with a black pistol-type operating handle featuring I-O / ON-OFF indication for manual switching and electrical isolation.
Yes. The operating handle can accommodate up to three padlocks, supporting controlled maintenance isolation procedures.
Yes. The OT630KLUU6BZ includes neutral and protective earth terminals. The steel enclosure door is also earthed through its hinges.
No auxiliary contacts are fitted as standard. Compatible accessories can be added separately, with a maximum configuration of 4 normally open and 2 normally closed contacts.
The enclosure measures 1000 mm high × 800 mm wide × 230 mm deep. ABB's enclosed switch-disconnector catalogue lists a unit weight of 52 kg.
The OT630KLUU6BZ has a listed rated short-time withstand current of 20 kA. The installation must also satisfy the manufacturer's specified short-circuit protection and coordination requirements.
No. The OT630KLUU6BZ is a switch disconnector designed for manual load switching and electrical isolation. Suitable protective devices must be installed separately to provide overload and short-circuit protection.
The OT630KLAA3B is a three-pole enclosed switch disconnector with IP54 protection and open cable entries, while the OT630KLUU6BZ is a six-pole enclosed switch disconnector with IP65 protection and blank cable entries. The six-pole model also uses a wider enclosure.
ABB OT enclosed switch disconnectors provide dependable manual isolation for demanding industrial electrical installations. With its OT630 frame, six-pole switching configuration, 570 A operational current rating, 315 kW AC-23A motor-load capability at 415 V AC, IP65 galvanised steel enclosure, black padlockable pistol handle and flexible blank cable entry arrangement, the OT630KLUU6BZ offers a robust solution for electrical contractors, machinery manufacturers, control panel builders and industrial maintenance engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.