Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Carlo Gavazzi UC80CND80FSM1 is an 80 × 80 mm ultrasonic sensor head for the UCEU80-1 evaluation unit with an 800–8000 mm sensing distance, distance and temperature signalling, M12 connection and IP67 protection.
The Carlo Gavazzi UC80CND80FSM1 is a long-range ultrasonic sensor head designed for non-contact distance and level measurement in industrial automation applications. As part of the Carlo Gavazzi UC80CND ultrasonic sensing system, it is specifically designed for use with the UCEU80-1 ultrasonic evaluation unit, which processes the sensor signals and provides configurable control and analogue outputs.
The UC80CND80FSM1 provides a nominal sensing distance of 800–8000 mm, making it suitable for long-range applications such as tank level measurement, bulk material monitoring and large-object position detection. Its wide 30° ultrasonic beam angle, temperature compensation and digital signal processing support consistent measurement in demanding industrial environments.
Featuring an 80 × 80 × 43 mm PBT housing, 5-pin M12 connector and IP67 protection, the UC80CND80FSM1 is designed for robust installation close to the measurement point while the associated evaluation electronics can be mounted remotely. The sensor head transmits distance and temperature information to the UCEU80-1 evaluation unit for processing and control.
The UC80CND80FSM1 transmits ultrasonic pulses towards a target and measures the returning echo to determine distance. The sensor head sends its distance and temperature information to the compatible UCEU80-1 evaluation unit, allowing the processing electronics to be installed remotely from the sensing point.
When paired with the UCEU80-1, the system can support programmable switching points, analogue measurement outputs and RS232 configuration. This two-part architecture is particularly useful for level measurement in tall tanks and other installations where placing the evaluation electronics away from the sensor head simplifies wiring, access and maintenance.
Tick the specs you need, then view products that match.
| IP Rating | IP67 | |
|---|---|---|
| Sensing Principle | Ultrasonic | |
| Sensing Distance | 8000 mm | |
| Connection | M12 connector | |
| Manufacturer | Carlo Gavazzi | |
| Series | UC80CND | |
| Model | UC80CND80FSM1 | |
| Product type | Ultrasonic sensor head | |
| Sensing principle | Ultrasonic distance measurement | |
| Compatible evaluation unit | UCEU80-1 | |
| Nominal sensing distance | 800–8000 mm | |
| Minimum resolution | 20 mm | |
| Repeatability | 0.5% | |
| Linearity | 0.5% | |
| Temperature deviation | 1% | |
| Ultrasonic signal frequency | 65 kHz | |
| Beam angle | 30° | |
| Rated operating voltage | 19–30 V DC | |
| Supply ripple | ≤10% | |
| No-load supply current | ≤50 mA | |
| Power-on delay | <10 ms | |
| Distance output | Signal for UCEU80-1 evaluation unit | |
| Temperature output | 2.93 V DC at 20 °C, 10 mV/°C | |
| Temperature compensation | Yes | |
| Housing dimensions | 80 × 80 × 43 mm | |
| Housing material | PBT polyester | |
| Connection | 5-pin M12 connector | |
| Electrical protection | Short-circuit, reverse-polarity and transient protection | |
| Protection rating | IP67 | |
| Operating temperature | -15 to +70 °C | |
| Storage temperature | -25 to +80 °C | |
| Weight | approx. 390 g | |
| CE marking | Yes |
The UC80CND80FSM1 is a long-range ultrasonic sensor head used for non-contact distance and level measurement in industrial automation applications.
The sensor head has a nominal sensing distance of 800–8000 mm, making it suitable for measurements at distances of up to 8 m.
No. The UC80CND80FSM1 is designed as a sensor head for the Carlo Gavazzi UCEU80-1 evaluation unit, which processes the distance and temperature signals and provides the configurable control outputs.
The sensor head provides distance and temperature information to the compatible UCEU80-1 evaluation unit for processing and measurement.
The UC80CND80FSM1 operates from a 19–30 V DC supply.
The sensor head uses a 5-pin M12 connector for connection to the associated ultrasonic evaluation system.
The ultrasonic sensor has a 30° beam angle, providing broad coverage for long-range object and level measurement.
Yes. It features an 80 × 80 × 43 mm PBT housing, short-circuit and reverse-polarity protection, temperature compensation and an IP67 protection rating.
Carlo Gavazzi ultrasonic sensing systems are used in industrial automation, material handling and process applications where dependable long-range non-contact distance and level measurement is required.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.