Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Carlo Gavazzi UA30CLD35AKTR is an M30 diffuse reflective ultrasonic distance sensor with a 300–3500 mm sensing range, 0–10 V DC analogue output, remote teach-in, 2 m cable and IP67 protection.
The Carlo Gavazzi UA30CLD35AKTR is an M30 diffuse reflective ultrasonic distance sensor designed for continuous non-contact measurement in industrial automation applications. Part of the Carlo Gavazzi UA30CLD range, it combines a 300–3500 mm sensing distance with a 0–10 V DC analogue output and remote teach-in functionality.
The analogue output can be configured using two taught set points, with an adjustable positive or negative output slope. This allows the sensor to provide a proportional voltage signal corresponding to target distance, making it particularly useful for level measurement, positioning and process-monitoring applications.
With a 15–30 V DC supply, 2 m fixed cable, temperature compensation and IP67 protection, the UA30CLD35AKTR provides a practical solution for industrial measurement applications where reliable sensing is required without depending primarily on target colour or optical contrast.
The UA30CLD35AKTR transmits ultrasonic pulses towards a target and measures the returning echo to determine distance. Its 0–10 V DC analogue output converts this measurement into a proportional signal that can be processed by compatible PLC analogue inputs, controllers and monitoring equipment.
Two measurement positions can be established through the remote teach input, allowing the analogue slope to be configured as positive or negative. Combined with its 300–3500 mm range, temperature compensation and 1 mm resolution, this makes the sensor particularly suitable for continuous level, distance and position monitoring.
Tick the specs you need, then view products that match.
| Sensing Mode | Diffuse | |
|---|---|---|
| IP Rating | IP67 | |
| Sensing Principle | Ultrasonic | |
| Housing Size | M30 | |
| Sensing Distance | 3500 mm | |
| Connection | Cable | |
| Manufacturer | Carlo Gavazzi | |
| Series | UA30CLD | |
| Model | UA30CLD35AKTR | |
| Product type | Analogue ultrasonic distance sensor | |
| Sensing principle | Diffuse reflective ultrasonic | |
| Rated operating distance | 300–3500 mm | |
| Measurement resolution | 1 mm | |
| Repeat accuracy | 0.2% | |
| Linearity error | <0.5% | |
| Analogue output | 0–10 V DC | |
| Output slope | Adjustable positive / negative | |
| Minimum output load | 1 kΩ | |
| Rated operating voltage | 15–30 V DC | |
| Supply ripple | ≤10% | |
| No-load supply current | ≤40 mA | |
| Carrier frequency | 130 kHz | |
| Response time | 400 ms | |
| Beam angle | 8° | |
| Temperature compensation | Yes | |
| Housing | M30 cylindrical | |
| Housing material | PBTP polyester | |
| Dimensions | M30 × 123.5 mm | |
| Connection type | Fixed cable | |
| Cable | 2 m, 5 × 0.25 mm² | |
| Configuration | Remote teach-in | |
| Indication | 2 yellow set-point LEDs and 1 green echo LED | |
| Electrical protection | Short-circuit, reverse-polarity and transient protection | |
| Protection rating | IP67 | |
| Operating temperature | -15 to +70 °C | |
| CE marking | Yes |
The UA30CLD35AKTR is an analogue ultrasonic distance sensor designed for continuous non-contact distance, position and level measurement in industrial automation applications.
The sensor has a rated operating distance of 300–3500 mm with a measurement resolution of 1 mm.
The UA30CLD35AKTR provides a 0–10 V DC analogue output that represents the measured target distance as a proportional voltage signal.
Yes. The sensor supports an adjustable positive or negative output slope, configured by teaching two measurement set points.
Yes. The UA30CLD35AKTR provides remote teach-in by wire, allowing the two analogue measurement set points to be configured without mechanical adjustment.
The sensor operates from a 15–30 V DC supply.
The UA30CLD35AKTR is supplied with a 2 m, 5-core fixed cable for direct hard-wired connection to industrial control equipment.
Yes. It features an M30 PBTP polyester housing, temperature compensation, built-in electrical protection and an IP67 protection rating.
Carlo Gavazzi ultrasonic sensors are used across industrial automation, machine building, material handling and process-control applications where dependable non-contact measurement, flexible analogue signalling and robust industrial construction are required.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.