Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Carlo Gavazzi SMS-02 is a rectangular coded safety magnetic sensor with 1NO + 1NC contacts, a 20 ± 3 mm operating distance and 2 m PVC cable for non-contact monitoring of industrial machine guards.
The Carlo Gavazzi SMS-02 is a coded safety magnetic sensor designed for non-contact monitoring of hinged, sliding and removable machine guards. It features a rectangular plastic housing with 1 normally-open (NO) + 1 normally-closed (NC) safety contact arrangement and is intended for operation with the corresponding Carlo Gavazzi CLS coded magnetic unit.
The SMS-02 uses a coded magnetic operating principle that makes the sensor/actuator pair more difficult to operate using readily available standard magnets. This makes it suitable for industrial machine-safety applications where reliable guard-position detection is required without the mechanical engagement and wear associated with conventional tongue-operated switches.
With an operating distance of 20 ± 3 mm, release distance of 30 ± 5 mm and reset distance of 35 ± 5 mm, the SMS-02 provides generous non-contact switching tolerances. It is supplied with a 2 m PVC cable and its contacts are rated up to 100 V AC, 0.25 A and 5 VA.
The Carlo Gavazzi SMS safety magnetic system uses a sensor mounted on the fixed machine structure and a corresponding CLS coded magnetic unit mounted on the movable guard. When the coded magnetic unit enters the operating zone, the SMS-02 changes the state of its 1NO + 1NC contacts, allowing an appropriate safety monitoring device to determine whether the protective guard is correctly positioned.
The SMS-02 provides a relatively generous 20 ± 3 mm operating distance, helping accommodate normal installation tolerances and minor guard movement. Because switching takes place without physical engagement between the sensor and actuator, the system is particularly useful on frequently operated doors and guards and in applications where mechanical wear needs to be minimised.
Tick the specs you need, then view products that match.
| Sensing Principle | Magnetic | |
|---|---|---|
| Sensing Distance | 3 mm | |
| Connection | Cable | |
| Manufacturer | Carlo Gavazzi | |
| Series | SMS Safety Magnetic Sensors | |
| Model | SMS-02 | |
| Manufacturer part number | SMS02 | |
| Product type | Coded safety magnetic sensor | |
| Housing type | Rectangular | |
| Housing material | Plastic / ABS | |
| Housing dimensions | 88 × 25 × 13 mm | |
| Safety contacts | 1NO + 1NC | |
| Operating distance (D-ON) | 20 ± 3 mm | |
| Release distance (D-OFF) | 30 ± 5 mm | |
| Reset distance (D-RESET) | 35 ± 5 mm | |
| Maximum switching voltage | 100 V AC | |
| Maximum switching current | 0.25 A | |
| Maximum switching power | 5 VA | |
| Maximum continuous current | 1 A | |
| Connection | Pre-wired PVC cable | |
| Cable length | 2 m | |
| Cable configuration | 4 × 0.15 mm² | |
| NO cable connection | Blue – Black | |
| NC cable connection | White – Brown | |
| Compatible magnetic unit | CLS coded magnetic unit | |
| Maximum misalignment | ±4 mm | |
| Approximate weight | 70 g | |
| Operating principle | Coded magnetic, non-contact | |
| Barcode / EAN | 8032529965463 |
The Carlo Gavazzi SMS-02 is a coded non-contact safety magnetic sensor with 1NO + 1NC contacts, designed for monitoring the position of hinged, sliding and removable machine guards.
The SMS-02 has a specified operating distance (D-ON) of 20 ± 3 mm when correctly aligned with its corresponding coded magnetic unit.
The SMS-02 provides one normally-open (NO) and one normally-closed (NC) contact. The blue and black conductors are used for the NO contact, while the white and brown conductors are used for the NC contact.
The specified release distance (D-OFF) is 30 ± 5 mm, while the reset distance (D-RESET) is 35 ± 5 mm.
The contacts are specified for a maximum switching voltage of 100 V AC, maximum switching current of 0.25 A and maximum switching power of 5 VA.
The SMS-02 is supplied with a 2 m PVC cable containing four 0.15 mm² conductors for the NO and NC contact circuits.
Yes. The SMS-02 is designed to operate with the corresponding Carlo Gavazzi CLS coded magnetic unit. Correct sensor-to-actuator alignment and installation are required for reliable operation.
The SMS-02 is suitable for non-contact position monitoring of hinged, sliding and removable guards on industrial machinery when incorporated into an appropriately designed safety system.
Carlo Gavazzi SMS coded magnetic safety sensors provide dependable non-contact monitoring of industrial machine guards, combining coded magnetic actuation with practical operating distances and complementary safety contacts for integration into correctly engineered machinery safety systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.