Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£68.25
The WAGO 757-383 is a high-quality 8-way, 3-pole M8 sensor/actuator distribution box with a 14-pole M16 trunk connector, designed to simplify decentralised field wiring in industrial automation systems. Part of the established WAGO 757 Series, this passive distribution box provides eight convenient connection points for compatible sensors and actuators, helping reduce individual cable runs and organise machine wiring.
Featuring eight 3-pole M8 female sockets and a 14-pole M16 male trunk connector, the WAGO 757-383 supports one PNP signal per M8 connection. Integrated green operating and yellow signal-status LEDs provide useful visual feedback during commissioning, operation and troubleshooting, allowing technicians to inspect individual signal states directly at the distribution box.
Designed for demanding industrial environments, the WAGO 757-383 combines a fully encapsulated PA 66 polyamide housing, IP67 protection and an operating temperature range of −25 to +80 °C. Its slim 152 × 30 × 26 mm construction makes it particularly suitable for machinery where mounting space is limited but multiple sensor connections are required.
Industrial automation equipment often uses numerous compact sensors distributed across machinery, conveyors and production lines. Routing individual sensor cables back to a central control cabinet can increase wiring complexity, installation time and maintenance requirements. The WAGO 757-383 provides a convenient eight-port M8 distribution point, allowing compatible field-device connections to be consolidated through a single 14-pole M16 trunk interface.
Each 3-pole M8 female socket supports one PNP signal connection, making the distribution box suitable for compatible industrial proximity sensors, position sensors and other low-voltage switching devices. The integrated green operating LED and yellow signal-status LEDs allow technicians to inspect supply and signal conditions at the machine, supporting faster commissioning and troubleshooting.
The WAGO 757-383 is a passive electrical distribution component, not a programmable I/O controller or fieldbus communication module. Its fully encapsulated PA 66 housing, threaded connector interfaces and IP67 protection support use in industrial environments. The protection rating applies when the M8 ports and M16 trunk connection are correctly mated or sealed. Connected devices must remain within the specified 2 A signal and 6 A supply connection current limits.
| Number of sensor-/actuator-slots | 8 |
|---|---|
| Operating temperature | -25 – 80 °C |
| Material insulation body | Polyamide (PA) |
| Housing colour | Other |
| Type of branches for sensor-/actuator cables | M8 |
| Max. current carrying capacity per I/O signal | 2 A |
| Operating voltage | 10 – 30 V |
| Max. current carrying capacity per socket | 6 A |
| Number of poles sensor/actuator slots | 3 |
| Housing material | Plastic |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 26 mm |
| With potential separation | Yes |
| Rated voltage | 32 V |
| Material of contact surface | Gold |
| Width | 30 mm |
| Length | 152 m |
| Thread sleeves sensor/actuator slots | M8 |
| Degree of protection (IP) | IP68 |
| Number of channels per connector slot | 8 |
| With LED indication | Yes |
| Pollution degree | 3 |
| Material contact body | Brass |
| Manufacturer | WAGO |
| Manufacturer part number | 757-383 |
| Product series | 757 Series |
| Product designation | M8 Sensor/Actuator Box; 8-Way; 3-Pole; M16 Connector |
| Product type | Passive sensor/actuator distribution box |
| Number of sensor/actuator ports | 8 |
| Sensor/actuator connection type | 8 × M8 female sockets |
| Contacts per M8 connection | 3 |
| Signal configuration | One signal per connection |
| Signal characteristics | PNP |
| Trunk cable connection | 1 × M16 male plug |
| Trunk connector contact count | 14 poles |
| Supply voltage | 10–30 V DC |
| Current-carrying capacity per signal connection | 2 A |
| Current-carrying capacity of supply connections | 6 A |
| Maximum contact resistance | 0.01 Ω |
| Rated electrical isolation | 500 V |
| Insulation resistance | 1000 MΩ |
| Operating indication | Green LED (U) |
| Status indication | Yellow LED, one per signal connection |
| Degree of protection | IP67 |
| Protection condition | Fully locked with compatible mating connectors or protective caps |
| Housing material classification | UL 94 V-0 |
| Housing properties | Silicone-free and halogen-free |
| Encapsulation | Fully encapsulated with conformal coating |
| Contact material | Copper-tin alloy (CuSn) |
| Contact plating | Nickel base coat with 0.8 µm gold plating |
| Threaded bush material | Nickel-plated die-cast zinc |
| Seal material | Viton |
| Connector mating cycles | 50 |
| Vibration resistance | IEC 60068-2-6 |
| Shock resistance | IEC 60068-2-27 |
| Mounting method | Screw mounting |
| Length / depth | 152 mm |
| Included marking accessories | Marking strips; compatible with WMB markers |
| Included M8 protective caps | 2 pieces |
| Packaging type | Box |
| EAN / GTIN | 4044918978699 |
The WAGO 757-383 is an 8-way, 3-pole M8 sensor/actuator distribution box with a 14-pole M16 trunk connector. It allows compatible industrial sensors and actuators to connect through a decentralised field wiring point.
The WAGO 757-383 has eight M8 female sockets. Each connection has three contacts and supports one PNP signal.
The WAGO 757-383 uses a 14-pole M16 male connector for its trunk cable connection. A compatible M16 cable assembly is required to connect the distribution box to the associated control system.
Yes. The WAGO 757-383 includes a green operating LED and yellow signal-status LEDs. The yellow indicators provide visual information for individual sensor/actuator signal connections.
The WAGO 757-383 operates with a 10–30 V DC supply. The manufacturer also specifies a rated voltage of 32 V AC RMS. Connected equipment must be compatible with the complete installation.
The WAGO 757-383 supports a current-carrying capacity of 2 A per signal connection and 6 A for supply connections. All applicable electrical limits must be observed when selecting connected devices.
Yes. The WAGO 757-383 has an IP67 protection rating when its connectors are fully locked with compatible mating connectors or suitable protective caps. Unused ports must be sealed correctly to maintain the specified protection.
Both products are 3-pole M8 sensor/actuator distribution boxes with an M16 trunk connector. The WAGO 757-363 provides six M8 connections, while the WAGO 757-383 provides eight M8 connections.
WAGO 757 Series sensor/actuator distribution boxes provide practical field wiring solutions for automation engineers, machine builders and maintenance professionals. The WAGO 757-383 combines eight 3-pole M8 sensor/actuator connections, a 14-pole M16 trunk connector, PNP signal support, integrated LED indication and IP67 protection to support organised decentralised industrial automation installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.