Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£223.82
The WAGO 757-285/000-025 is an 8-way, 5-pole M12 sensor/actuator distribution box with an integrated 25 m connecting cable, designed to simplify field wiring in industrial automation systems. Part of the WAGO 757 Series, this passive distribution box brings eight sensor and actuator connection points together in one compact unit, reducing the need for separate home-run cables from individual field devices.
Featuring eight 5-pole M12 female sockets, the WAGO 757-285/000-025 provides two signal connections per port for compatible industrial sensors and actuators. Its permanently attached 25 m connecting cable enables the distribution box to be installed close to machinery while providing a direct wiring route to remote control equipment or a suitable termination point.
The module operates with a 10–30 V DC supply and supports current-carrying capacities of 2 A for signal connections and 9 A for supply connections. Integrated yellow signal-status LEDs and a green operating indicator provide convenient visual monitoring during installation, commissioning and maintenance.
With its compact industrial housing, robust M12 connection interfaces and an operating temperature range of −25 to +80 °C, the WAGO 757-285/000-025 provides a practical decentralised connection solution for factory automation, production machinery and distributed sensor/actuator installations.
The WAGO 757-285/000-025 helps simplify industrial field wiring by combining eight sensor/actuator connection points within one distribution box. Each 5-pole M12 socket provides two signal connections, while the integrated 25 m trunk cable supports installation at a distance from the main control equipment. This arrangement can reduce individual cable runs, improve wiring organisation and simplify maintenance.
Its robust industrial construction, standardised M12 connections and integrated LED indicators support practical operation in automated machinery. For reliable performance, installers should observe the specified current limits, verify conductor assignments and ensure unused ports are sealed with compatible protective caps. Particular attention should be paid to voltage drop over the 25 m cable, especially where multiple field devices draw current simultaneously.
| Max. total current | 25 A |
|---|---|
| Number of sensor-/actuator-slots | 8 |
| Operating temperature | -25 – 80 °C |
| Fix cable version suitable for cable guide chain | Yes |
| Length of the preassembled cable | 25 m |
| Material insulation body | Polyamide (PA) |
| Cable length configurable | Yes |
| Housing colour | Grey |
| Type of branches for sensor-/actuator cables | M12 |
| Max. current carrying capacity per I/O signal | 2 A |
| Number of poles sensor/actuator slots | 5 |
| Max. current carrying capacity per socket | 9 A |
| Operating voltage | 10 – 30 V |
| Housing material | Plastic |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Height | 26 mm |
| Width | 60 mm |
| Material of contact surface | Gold |
| Rated voltage | 32 V |
| Degree of protection (IP) | IP68 |
| Thread sleeves sensor/actuator slots | M12 |
| Pollution degree | 3 |
| With LED indication | Yes |
| Number of channels per connector slot | 8 |
| Depth | 152 mm |
| Material contact body | Brass |
| Manufacturer | WAGO |
| Manufacturer part number | 757-285/000-025 |
| Product series | WAGO 757 |
| Product designation | M12 sensor/actuator box; 8-way; 5-pole; 25 m |
| Product type | Passive sensor/actuator distribution box |
| Number of field-device ports | 8 |
| Field connection technology | 8 × M12 female sockets |
| Contacts per M12 socket | 5 |
| Signal connections per port | 2 |
| Trunk connection | Integrated fixed connecting cable |
| Connecting cable length | 25 m |
| Supply voltage | 10–30 V DC |
| Rated AC voltage | 32 V RMS |
| Current-carrying capacity, signal connections | 2 A |
| Current-carrying capacity, supply connections | 9 A |
| Signal characteristics | PNP |
| Maximum contact resistance | 0.01 Ω |
| Insulation resistance | >109 Ω |
| Rated electrical isolation value | 500 V |
| Potential groups | Functionally separated contacts |
| Signal indicators | Two yellow LEDs per port, A and B |
| Operating indicator | Green LED |
| Operating ambient temperature | −25 to +80 °C |
| Housing width | 60 mm |
| Housing height | 26 mm |
| Housing length | 152 mm |
| Environmental protection | IP67 in WAGO Series 757 CAD documentation; some distributors specify IP68, so verify the applicable rating against the current manufacturer datasheet |
| Included accessories | 10 markers and 2 M12 protective caps |
| Country of origin | Germany |
| Manufacturer product reference | WAGO 757-285/000-025 Product Information |
| Technical datasheet | WAGO 757-285/000-025 Datasheet |
The WAGO 757-285/000-025 is an 8-way M12 sensor/actuator distribution box used to connect multiple industrial field devices through a single integrated 25 m connecting cable. It is suitable for compatible decentralised automation and industrial control installations.
The WAGO 757-285/000-025 provides eight 5-pole M12 female sockets, with two signal connections available per port.
The WAGO 757-285/000-025 features a permanently attached 25 m connecting cable for wiring the sensor/actuator distribution box to compatible control equipment.
The distribution box supports a 10–30 V DC supply, with current-carrying capacities of 2 A for signal connections and 9 A for supply connections, subject to the manufacturer's electrical loading requirements.
Yes. The WAGO 757-285/000-025 features two yellow signal-status LEDs per M12 port and a green operating-status LED, helping technicians monitor the distribution box and connected signals.
WAGO industrial connection technology supports organised field wiring, dependable equipment connectivity and efficient maintenance. The WAGO 757-285/000-025 combines eight 5-pole M12 connections, an integrated 25 m cable and LED status indication to provide a practical decentralised sensor/actuator distribution solution for industrial automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.