Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£11.05
The WAGO 756-6509/040-050 is a pre-assembled 4-pole M8 female to M12 A-coded male sensor/actuator cable designed for industrial automation, machine building and field-level control systems. Featuring an angled M8 female socket at one end and a straight M12 A-coded male plug at the other, this cable provides a practical connection between compatible industrial devices using different circular connector sizes.
Part of the WAGO 756 Series industrial connection range, the 756-6509/040-050 simplifies field wiring with factory-assembled connectors at both ends. The angled M8 female socket supports space-efficient cable routing around machinery, equipment housings and restricted installation areas, while the straight M12 male plug enables convenient connectivity to compatible automation equipment.
With a 5 m nominal cable length and 4-pole configuration, the WAGO 756-6509/040-050 provides extended reach for industrial sensor and actuator connections. Its pre-assembled design helps reduce installation time, minimise manual termination work and support straightforward maintenance in automated production environments.
Industrial automation systems frequently incorporate compact sensors, actuators and distributed input/output modules with different connector formats. The WAGO 756-6509/040-050 provides a convenient connection between compatible 4-pole M8 and 4-pole M12 A-coded interfaces. Its angled M8 female socket is particularly useful where connection points are positioned close to machine frames, protective housings or other components, helping simplify cable routing in confined spaces.
The WAGO 756 Series includes industrial sensor/actuator cables with different connector sizes, orientations, pole configurations and lengths. The 756-6509/040-050 combines an angled M8 female socket with a straight M12 male plug and a 5 m cable, offering a practical connection solution for factory automation, machine control and distributed field wiring. Installers should confirm the mating connector configuration, pin assignment and electrical requirements of both connected devices before installation.
| Type of electrical connection, field-sided | M8 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 4 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 5 m |
| Material of contact surface | Other |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Series | 756 Series |
| Model | 756-6509/040-050 |
| Manufacturer article number | 756-6509/040-050 |
| Product type | Sensor/actuator connection cable |
| Connector A | M8 female socket |
| Connector A orientation | Angled / right-angle |
| Connector B | M12 A-coded male plug |
| Connector B orientation | Straight / axial |
| Connection arrangement | M8 female to M12 male |
| Connector A size | M8 |
| Connector B size | M12 |
| Connector B coding | A-coded |
| Connector A cable outlet | 90° |
| Connector B cable outlet | 0° |
| Connector gender | Female to male |
| Connector termination | Factory-assembled at both ends |
| Application | Industrial sensor and actuator connections |
| Installation | Plug-in connection between compatible M8 and M12 interfaces |
The WAGO 756-6509/040-050 is a pre-assembled sensor/actuator cable used to connect compatible industrial sensors, actuators and automation equipment through an angled 4-pole M8 female socket and straight M12 A-coded male plug.
The cable has a nominal length of 5 m, providing extended reach between industrial field devices and automation equipment.
The cable features an angled M8 female socket at one end and a straight M12 A-coded male plug at the other. Both connectors are factory-assembled.
The WAGO 756-6509/040-050 has a 4-pole configuration, intended for compatible industrial devices using four electrical contacts.
The angled M8 connector directs the cable away from the mating interface at approximately 90°, helping simplify cable routing where a straight connector would require additional clearance.
M8 and M12 are industrial circular connector formats with different nominal thread sizes. M8 connectors are commonly used with compact sensors, while M12 connectors are widely used for industrial field connections. Compatible gender, pole count, coding and pin assignments are essential.
No. The cable is supplied with factory-assembled connectors at both ends, eliminating the need to fit separate connectors during installation.
Yes, provided the sensor has a compatible 4-pole M8 male interface and the input/output module has a compatible 4-pole M12 A-coded female interface. The pin assignments and electrical requirements must also match.
No. Both connected devices must have compatible connector genders, pole configurations, coding, pin assignments and electrical requirements. Different connector sizes alone do not guarantee electrical compatibility.
Yes. The angled M8 female connector can help accommodate restricted installation spaces, while the 5 m cable length provides flexibility when routing connections between machinery components.
Both variants feature an angled M8 female socket and a straight M12 A-coded male plug. The 756-6509/040-050 has a 4-pole configuration and 5 m cable, whereas the 756-6509/030-030 has a 3-pole configuration and 3 m cable. The correct variant depends on the electrical contact requirements and required cable length.
WAGO industrial connection technology is used by machine builders, automation engineers and control system integrators across a wide range of industrial applications. The WAGO 756-6509/040-050 provides a practical, pre-assembled 4-pole M8-to-M12 sensor/actuator connection solution for efficient field wiring, space-saving cable routing and integration into compatible industrial automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.