Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£10.33
The WAGO 756-6501/030-030 is a reliable 3-pole M12A-to-M8 sensor/actuator connection cable designed for connecting industrial sensors, actuators and automation equipment. As part of the WAGO 756 sensor/actuator cable range, it provides a practical pre-assembled connection solution for industrial control systems, machinery and distributed I/O installations.
This cable features a straight M12 A-coded female socket at one end and a straight M8 male plug at the other, enabling straightforward connections between compatible devices with different connector sizes. Its factory-fitted connectors help simplify installation, reduce manual wiring requirements and support consistent electrical connections in industrial automation environments.
With a cable length of 3 m and a 3-pole connection arrangement, the WAGO 756-6501/030-030 is suitable for linking sensors and actuators to compatible control equipment, interface modules and industrial I/O systems. The straight connector configuration supports convenient installation where suitable cable routing and connector clearance are available.
Industrial sensor and actuator cables provide the electrical connections needed to transfer signals and support compatible field devices within automated machinery. Pre-assembled cables such as the WAGO 756-6501/030-030 simplify installation by providing factory-fitted connectors, reducing the amount of on-site cable preparation and helping maintain consistent connection quality.
The WAGO 756-6501/030-030 combines an M12 A-coded socket with an M8 plug, allowing compatible devices using these different circular connector formats to be connected through a single cable assembly. Its 3-pole configuration and 3 m length make it a practical choice for sensor wiring, actuator connections and distributed automation installations where reliable and maintainable cabling is important.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M8 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 3 m |
| Material of contact surface | Other |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Series | WAGO 756 Sensor/Actuator Cables |
| Model | 756-6501/030-030 |
| Manufacturer part number | 756-6501/030-030 |
| Product type | Sensor/actuator connection cable |
| Connector 1 | M12 A-coded female socket |
| Connector 1 orientation | Straight |
| Connector 2 | M8 male plug |
| Connector 2 orientation | Straight |
| Connector arrangement | M12A socket to M8 plug |
| Connection type | Pre-assembled cable with connectors at both ends |
| Connector format | Circular industrial connectors |
| Application category | Industrial sensor and actuator connectivity |
| Installation | Connection between compatible M12 and M8 device interfaces |
The WAGO 756-6501/030-030 is a sensor/actuator connection cable used to connect compatible industrial sensors, actuators and automation equipment through M12 and M8 connector interfaces.
The cable has a nominal length of 3 m, making it suitable for connecting compatible devices positioned within this cable-routing distance.
The cable features a straight M12 A-coded female socket at one end and a straight M8 male plug at the other end.
The cable has a 3-pole configuration designed for compatible three-contact sensor and actuator connections.
No. The WAGO 756-6501/030-030 is supplied as a pre-assembled cable with connectors fitted at both ends, helping reduce installation time and eliminating the need to assemble the connectors on site.
WAGO sensor/actuator connection solutions are designed to support reliable industrial device connectivity, straightforward installation and efficient machine wiring. The WAGO 756-6501/030-030 provides a practical 3 m M12A-to-M8 cable assembly for engineers, machine builders and maintenance professionals working with compatible industrial automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.