Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.68
The WAGO 756-6501/030-020 is a pre-assembled 3-pole sensor/actuator connection cable designed for industrial automation, machine building and field-device wiring. Featuring a straight M12 A-coded female socket and a straight M8 connector, this 2 m cable provides a practical solution for connecting compatible industrial sensors, actuators and automation equipment with different circular connector interfaces.
Part of the WAGO 756 sensor/actuator cable range, the 756-6501/030-020 combines an M12 A-coded connection with a compact M8 interface in a factory-assembled cable. Its 3-pole configuration supports compatible industrial signal and control circuits, while the straight connector arrangement allows conventional cable routing where sufficient axial clearance is available.
The 2 m cable length provides convenient reach between nearby field devices, junction boxes and compatible automation equipment. With connectors fitted at both ends, the assembly eliminates manual connector termination and helps simplify installation, maintenance and equipment replacement.
Connector verification note: WAGO's published product heading identifies the M8 end as a female connector, while a distributor listing identifies it as male. Confirm the M8 connector gender against the current WAGO technical drawing before specifying a mating connector. Electrical ratings, protection class and cable material are not stated here because exact-part values have not been independently confirmed.
Industrial automation installations frequently combine field devices with different connector sizes. The WAGO 756-6501/030-020 provides a convenient M12-to-M8 sensor/actuator cable assembly, helping connect compatible equipment without requiring separate field-assembled connectors.
The M12 A-coded interface provides a standardised industrial circular connection, while the M8 interface accommodates appropriately equipped compact field devices. This combination can be particularly useful where sensors, actuators or connection modules use different connector formats.
The 2 m cable length offers practical routing flexibility for machinery layouts where connected devices are positioned relatively close together. Straight connectors support conventional cable routing, while the factory-assembled construction helps reduce installation time and simplify replacement.
For dependable operation, installers should verify the M8 connector gender, mating connector compatibility, contact assignments, electrical ratings and environmental suitability against the current WAGO technical documentation. Correct connector engagement, appropriate strain relief and suitable cable routing help maintain reliable electrical connections throughout the installation's service life.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M8 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 2 m |
| Material of contact surface | Other |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-6501/030-020 |
| Product series | WAGO 756 |
| Product type | Pre-assembled sensor/actuator connection cable |
| Connection arrangement | M12 to M8 |
| Connector 1 | M12 female socket |
| Connector 1 coding | A-coded |
| Connector 1 orientation | Straight (axial) |
| Connector 2 | M8 circular connector |
| Connector 2 orientation | Straight (axial) |
| Assembly type | Double-ended, factory-assembled cable |
| Connector interfaces | M12 A-coded and M8 |
| GTIN/EAN | 4066966503418 |
| Typical application | Industrial sensor and actuator interconnections |
The WAGO 756-6501/030-020 is a 3-pole sensor/actuator connection cable designed to connect compatible industrial sensors, actuators and automation equipment using M12 A-coded and M8 circular connector interfaces.
The cable has a length of 2 m, providing convenient routing flexibility between compatible industrial automation devices.
The cable has a straight M12 A-coded female socket at one end and a straight M8 connector at the other. The M8 connector gender should be confirmed against the current manufacturer drawing because published listings differ.
The cable has a 3-pole configuration, providing three electrical contacts for compatible industrial sensor and actuator circuits.
Yes. Both connectors have a straight cable outlet, supporting conventional axial cable routing from the connection points.
M12 and M8 are different industrial circular connector interface sizes. The WAGO 756-6501/030-020 combines an M12 A-coded interface with an M8 interface for connecting compatible equipment that uses these different connector formats.
No. The WAGO 756-6501/030-020 is factory-assembled with connectors at both ends, allowing connection to compatible equipment without manual connector termination.
M12 identifies the circular connector interface, while A-coding describes its mechanical keying arrangement. Mating connectors must have compatible coding, gender and contact configurations.
Yes. It can be used with compatible industrial proximity sensors and other automation devices, provided the M12 and M8 interfaces, three-pole contact configuration and electrical requirements match the application.
No. The WAGO 756-6501/030-020 is an M12-to-M8 cable assembly. It combines a straight M12 A-coded female socket with a straight M8 connector, rather than using M12 connectors at both ends.
WAGO sensor/actuator connection cables provide standardised connectivity solutions for industrial automation and machine-building applications. The 756-6501/030-020 combines an M12 A-coded female socket, an M8 connector, a 3-pole configuration and a 2 m cable length to support efficient installation and practical connections between compatible industrial field devices using different connector sizes.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.