Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£7.20
The WAGO 756-6401/030-003 is a compact, pre-assembled 3-pole M12 A-coded sensor/actuator cable designed for connecting compatible industrial sensors, actuators and automation equipment. Featuring a straight M12 A-coded female socket at one end and a straight M12 A-coded male plug at the other, it provides a convenient connection solution for industrial field-level wiring.
With a short 0.3 m cable length, the WAGO 756-6401/030-003 is particularly useful for connecting closely positioned devices, sensor distribution modules and decentralised I/O equipment. Its straight-to-straight connector arrangement enables straightforward installation where both devices have compatible M12 A-coded interfaces.
Part of the WAGO 756 series, this sensor/actuator cable provides a factory-assembled connection with IP67 protection when correctly mated. Its compact length helps minimise excess cable, making it a practical choice for space-conscious industrial automation installations.
Industrial sensors and actuators require dependable electrical connections to support consistent signal transmission and reliable machinery operation. The WAGO 756-6401/030-003 provides a ready-made connection between compatible three-pole M12 A-coded interfaces, making it suitable for sensors, actuators, decentralised I/O modules and machine-level automation equipment.
The compact 0.3 m cable length is particularly useful where connection points are positioned close together. By minimising unnecessary cable length, the assembly helps maintain an organised wiring layout and reduces the need to accommodate excess cable inside compact machinery.
Its straight M12 female-to-male connector arrangement supports straightforward installation, while the IP67-rated connector system provides protection against dust and moisture when correctly mated. Installers should ensure that sufficient clearance is available for the straight connectors and that the cable is routed without excessive bending or mechanical strain.
Before installation, verify the connector pin assignments, electrical ratings and environmental requirements against the specifications of the connected devices.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 0.3 m |
| Material of contact surface | Other |
| Rated voltage | 250 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-6401/030-003 |
| Product series | 756 |
| Product category | Sensor/actuator connection cable |
| Assembly type | Double-ended, pre-assembled cable |
| Connection arrangement | M12 A-coded female socket to M12 A-coded male plug |
| Connector A | M12 A-coded female socket |
| Connector A orientation | Straight, 0° |
| Connector B | M12 A-coded male plug |
| Connector B orientation | Straight, 0° |
| Equivalent cable length | 300 mm |
| Connector coding | A-coded at both ends |
| Connector format | M12 circular connectors |
| Ingress protection | IP67 when correctly mated |
| Connection method | Factory-assembled plug-and-socket cable |
| Typical application | Industrial sensor and actuator connections |
The WAGO 756-6401/030-003 is a pre-assembled sensor/actuator cable designed to connect compatible industrial sensors, actuators and automation equipment using three-pole M12 A-coded interfaces.
The cable features a 3-pole straight M12 A-coded female socket at one end and a 3-pole straight M12 A-coded male plug at the other. Both connectors have a straight configuration.
The cable is 0.3 m long, equivalent to 300 mm, making it suitable for short connections between closely positioned industrial devices.
M12 A-coding identifies the connector's mechanical keying arrangement, commonly used for industrial sensor and actuator connections. The cable must be connected to compatible M12 A-coded interfaces with suitable electrical ratings and pin assignments.
Yes. The cable is designed for compatible industrial sensor and actuator connections and provides IP67 protection when its M12 connectors are correctly mated. The installation must remain within the applicable electrical and environmental limits.
WAGO sensor/actuator cables provide practical connectivity for industrial field devices and automation systems. The 756-6401/030-003 combines standardised three-pole M12 A-coded connections, straight female and male connectors and a compact 0.3 m cable length to support efficient industrial sensor and actuator wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.