Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.66
The WAGO 756-6203/030-020 is a pre-assembled 3-pole M8 sensor/actuator connection cable designed for dependable connections between compatible industrial sensors, actuators and automation equipment. Featuring an angled M8 female socket at one end and a straight M8 male plug at the other, this cable provides a practical solution for industrial field-level wiring.
With a 2 m cable length, the WAGO 756-6203/030-020 offers convenient routing flexibility between sensors, decentralised I/O modules and other industrial devices. The angled female connector is particularly useful where installation space is restricted or where a right-angle cable exit helps maintain a tidy wiring arrangement.
Part of the WAGO 756 series, this sensor/actuator cable combines factory-fitted M8 connectors with a durable industrial cable construction. Its black polyurethane (PUR) sheath, halogen-free design and IP67 connector protection when correctly mated make it suitable for compatible machinery and automation installations.
Industrial sensors and actuators depend on consistent electrical connections to support reliable signal transmission and machine operation. The WAGO 756-6203/030-020 provides a ready-made connection between compatible three-pole M8 interfaces, making it suitable for sensor distribution systems, decentralised I/O equipment and machine-level automation installations.
The angled M8 female connector is particularly useful where sensors are installed close to machine frames, protective covers or adjacent equipment. Its right-angle cable exit helps guide the cable away from the connection point without requiring the same straight-line clearance as an axial connector. The opposite straight M8 male plug supports straightforward connection to compatible equipment.
The 2 m PUR cable provides convenient routing flexibility, while the IP67-rated connector system helps protect correctly mated connections against dust and moisture. Installers should verify connector pin assignments, electrical ratings, cable bend radius and environmental requirements before installation.
| Type of electrical connection, field-sided | M8 |
|---|---|
| Type of electrical connection, box-sided | M8 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 2 m |
| Material of contact surface | Other |
| Rated voltage | 60 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-6203/030-020 |
| Product series | 756 |
| Product category | Sensor/actuator connection cable |
| Assembly type | Double-ended, pre-assembled cable |
| Connection arrangement | M8 female socket to M8 male plug |
| Connector A | M8 female socket, angled |
| Connector A cable exit | 90° |
| Connector B | M8 male plug, straight |
| Connector B cable exit | 0° |
| Rated operating voltage | 60 V |
| Rated operating current | 4 A |
| Contact resistance | 10 mΩ |
| Cable sheath material | Polyurethane (PUR) |
| Cable sheath colour | Black |
| Halogen-free | Yes |
| Shielding | Unshielded |
| Ingress protection | IP67 when correctly mated |
| Permissible cable temperature, installed without movement | −50 to +90 °C |
| Permissible cable temperature, installation and handling | −25 to +90 °C |
| Connector format | M8 circular connectors |
| Connection method | Factory-assembled plug-and-socket cable |
| Typical application | Industrial sensor and actuator connections |
The WAGO 756-6203/030-020 is a pre-assembled sensor/actuator cable used to connect compatible industrial sensors, actuators and automation equipment with three-pole M8 interfaces.
The cable features a 3-pole angled M8 female socket at one end and a 3-pole straight M8 male plug at the other. The female connector has a 90° cable exit, while the male connector has a straight 0° cable exit.
The cable is 2 m long, providing convenient routing flexibility between compatible industrial sensors, actuators and automation equipment.
The cable has a rated operating voltage of 60 V and a rated operating current of 4 A. Connected equipment must be compatible with these ratings.
An angled M8 female connector can simplify cable routing where installation space is limited. Its 90° cable exit is particularly useful when a straight connector would require excessive clearance or create an inconvenient cable path.
WAGO sensor/actuator cables provide practical connectivity for industrial field devices and automation systems. The 756-6203/030-020 combines standardised three-pole M8 connections, an angled female socket, a straight male plug and a durable 2 m PUR cable to support efficient sensor and actuator wiring in industrial machinery.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.