Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.28
The WAGO 756-6101/030-050 is a pre-assembled 3-pole M8 sensor/actuator cable designed for connecting industrial sensors, actuators and automation equipment. Featuring a straight M8 female socket and a free cable end, this connection cable offers a practical solution for installations requiring a standardised sensor connector and flexible field termination.
With a 5 m cable length, the WAGO 756-6101/030-050 provides extended reach between field-mounted devices and industrial control equipment. Its straight M8 connector supports straightforward connection to compatible M8 male interfaces, while the unterminated end allows integration with suitable terminal blocks, junction boxes and control cabinet wiring.
As part of the WAGO 756 series, this cable is designed for industrial sensor and actuator connectivity. Its factory-fitted connector simplifies installation and replacement, while the compact M8 interface and IP67 ingress protection when correctly mated support reliable field connections in demanding automation environments.
Industrial sensors and actuators require dependable electrical connections to support accurate signal transmission and consistent machinery operation. The WAGO 756-6101/030-050 provides a ready-made three-pole M8 female connection while leaving the opposite end available for termination into compatible industrial control equipment. This arrangement is particularly useful for connecting field-mounted sensors to terminal blocks, control cabinets and junction boxes.
The 5 m cable length provides additional installation flexibility when sensors and actuators are located farther from control equipment. Its straight M8 connector supports convenient mating with compatible devices, while the IP67-rated connector system helps protect the connection from dust and moisture when correctly assembled. The free cable end must be terminated and protected appropriately for the operating environment.
| Type of electrical connection, field-sided | M8 |
|---|---|
| Type of electrical connection, box-sided | Free conductor end |
| Number of poles | 3 |
| Positioning cable feed, field-sided | Straight |
| Rated current In | 4 A |
| Cable length | 5 m |
| Material of contact surface | Other |
| Rated voltage | 60 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | Other |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Halogen free | Yes |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-6101/030-050 |
| Product series | 756 |
| Product type | Sensor/actuator connection cable |
| Connection arrangement | M8 female socket to free cable end |
| Connector type | M8 socket |
| Connector gender | Female |
| Connector orientation | Straight |
| Second connection | Free cable end for field termination |
| Connector protection rating | IP67 when correctly mated |
| Connector configuration | Single-ended, pre-assembled cable |
| Typical connection interface | M8 male sensor or actuator connector |
| Application | Industrial sensor and actuator wiring |
The WAGO 756-6101/030-050 is a sensor/actuator cable used to connect compatible industrial devices with a three-pole M8 male interface to control equipment using a free cable end.
It features a 3-pole straight M8 female socket at one end and an unterminated free cable end at the other. It does not have a second moulded circular connector.
The cable is 5 m long, providing additional flexibility when connecting industrial sensors and actuators to control equipment.
The M8 connector provides IP67 ingress protection when correctly mated with a compatible connector. The free cable end requires appropriate termination and environmental protection.
Yes. The free cable end can be terminated into suitable PLC input terminals, terminal blocks or associated control wiring, provided that the sensor pin assignment and electrical requirements are compatible with the installation.
WAGO sensor/actuator cables support dependable industrial field wiring through standardised connector technology and practical cable configurations. The 756-6101/030-050 combines a straight three-pole M8 female socket, a flexible free-end termination arrangement and a 5 m cable length for convenient integration into industrial sensor and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.