Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£17.43
The WAGO 756-5509/040-020 is a 4-pole M8-to-M12 sensor/actuator connection cable designed to connect compatible industrial sensors, actuators and automation equipment. Featuring a right-angled M8 female socket and a straight M12 A-coded male plug, this pre-assembled cable provides a practical connection between industrial devices using different circular connector sizes.
Part of the WAGO 756 sensor/actuator connectivity series, the cable features a 2 m length, durable black polyurethane (PUR) outer sheath and unshielded multicore construction. Its factory-fitted connectors simplify installation and help eliminate the need for manual connector assembly.
The WAGO 756-5509/040-020 is particularly useful for installations where space around the sensor or actuator is limited. Its 90° M8 female connector allows the cable to exit alongside the connected device, while the straight M12 male connector supports conventional in-line connections to compatible industrial equipment.
Designed for industrial environments, the cable combines IP67 connector protection when correctly mated with a PUR sheath offering resistance to common environmental stresses. Its four conductors provide the electrical connections required by compatible 4-pole sensor and actuator interfaces.
Modern industrial automation systems frequently incorporate sensors, actuators and distributed I/O equipment with different connector sizes. The WAGO 756-5509/040-020 provides a convenient 4-pole M8 female-to-M12 male connection, allowing compatible devices to be interconnected without separate connector assemblies.
The cable's right-angled M8 female socket is particularly beneficial where installation space is restricted. Its angled construction allows the cable to be routed alongside a sensor or actuator housing, helping reduce the clearance needed around the connection point. The straight M12 A-coded male plug provides a conventional interface at the opposite end.
The 2 m cable length provides flexibility for installations where sensors or actuators are positioned away from the associated automation equipment. Compared with the 1 m variant, it allows a longer connection route without requiring a separate extension cable.
Its four 0.25 mm² conductors are identified by brown, white, blue and black insulation. These colours follow common industrial sensor wiring conventions, although the electrical functions and pin assignments of the connected devices should always be verified before installation.
The black PUR outer sheath offers resistance to industrial oils, chemicals, microbes, hydrolysis and UV radiation. The cable is also identified as suitable for drag-chain applications when installed within the manufacturer's specified bending and movement limits.
With IP67-rated connector interfaces when correctly mated, the WAGO 756-5509/040-020 supports reliable connectivity in dusty or moisture-prone industrial environments. Its factory-assembled construction makes it a practical choice for machine builders, automation engineers and maintenance professionals.
| Type of electrical connection, field-sided | M8 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Positioning cable feed, box-sided | Straight |
| Number of poles | 4 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 1 m |
| Material of contact surface | Other |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Product series | 756 Sensor/Actuator Connectivity |
| Manufacturer part number | 756-5509/040-020 |
| Product type | Pre-assembled sensor/actuator connection cable |
| Connection configuration | M8 female socket to M12 male plug |
| Connector 1 | M8 female socket |
| Connector 1 orientation | Right-angled (90°) |
| Connector 2 | M12 male plug |
| Connector 2 orientation | Straight (0°) |
| M12 connector coding | A-coded |
| Number of conductors | 4 |
| Nominal conductor cross-section | 0.25 mm² |
| Conductor 1 colour | Brown (+) |
| Conductor 2 colour | White |
| Conductor 3 colour | Blue (−) |
| Conductor 4 colour | Black (signal) |
| Cable construction | Round, multicore |
| Shielding | Unshielded |
| Cable sheath material | Polyurethane (PUR) |
| Cable colour | Black |
| Nominal cable outer diameter | 4.0 mm ± 0.1 mm |
| Ingress protection | IP67 when correctly mated |
| Halogen-free | Yes |
| Drag-chain suitability | Yes, subject to manufacturer specifications |
| Environmental resistance | Microbes, hydrolysis, oils, chemicals and UV radiation |
| Cable listing | UL listed |
| Connector assembly | Factory fitted at both ends |
| Connector mounting | Free-hanging / in-line |
| Application | Industrial sensor and actuator connections |
The WAGO 756-5509/040-020 is a 4-pole M8-to-M12 sensor/actuator connection cable designed to connect compatible industrial sensors, actuators and automation equipment using different circular connector sizes.
The cable features a right-angled M8 female socket at one end and a straight M12 A-coded male plug at the other. Both connectors are factory assembled.
The cable is 2 m (2,000 mm) long, providing flexible routing between compatible industrial field devices and automation equipment.
The cable has 4 poles, providing four electrical contacts at each connector for compatible industrial sensor and actuator circuits.
The cable contains four conductors with a nominal cross-section of 0.25 mm² each.
The cable uses brown, white, blue and black conductors. These correspond to the four electrical connections, with brown commonly used for positive supply, blue for negative supply and black for a signal connection. Always verify the connected equipment's electrical assignments.
Yes. Its connector interfaces provide IP67 protection when correctly mated with compatible connectors, helping protect electrical connections against dust ingress and temporary water immersion under the relevant test conditions.
No. The WAGO 756-5509/040-020 features an unshielded multicore cable. Applications requiring electromagnetic shielding should use an appropriately specified shielded cable assembly.
The cable features a black polyurethane (PUR) sheath with halogen-free construction and good resistance to microbes, hydrolysis, oils, chemicals and UV radiation.
Yes. The cable is identified as suitable for drag-chain applications, subject to the manufacturer's specified bending radius, movement limits and environmental operating conditions.
The right-angled M8 female socket allows the cable to be routed alongside machinery or field-device surfaces, helping reduce connector clearance requirements and simplify installation in confined spaces.
WAGO's catalogue identifies a nominal cable outer diameter of 4.0 mm ± 0.1 mm, providing a compact profile for industrial cable routing.
Yes, provided the equipment has compatible M8 male and M12 female interfaces and suitable electrical ratings and pin assignments. The cable provides a physical electrical connection but does not convert communication protocols or signal types.
Both products feature 4-pole right-angled M8 female and straight M12 A-coded male connectors. The primary difference is cable length: the 756-5509/040-010 is 1 m, while the 756-5509/040-020 is 2 m.
No. The cable is supplied with factory-fitted connectors at both ends, eliminating the need for manual M8 and M12 connector assembly during installation.
WAGO sensor/actuator connection cables provide practical connectivity solutions for industrial automation engineers, machine builders and maintenance professionals. The 756-5509/040-020 combines a 2 m black PUR cable, right-angled 4-pole M8 female socket, straight M12 A-coded male plug and IP67-rated connector protection to support dependable industrial field-device wiring and automation system integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.