Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£17.87
The WAGO 756-5404/050-010 is a pre-assembled 1 m, 5-pole M12 A-coded sensor/actuator cable designed for dependable connections in industrial automation systems. Featuring a 90° angled M12 female socket at one end and a 90° angled M12 male plug at the other, it provides a compact connection solution for compatible sensors, actuators and industrial control equipment.
Unlike straight-connector cable assemblies, the WAGO 756-5404/050-010 uses angled connectors at both ends, helping route cables alongside machinery and equipment where installation clearance is restricted. Its factory-assembled connectors simplify installation and reduce the need for on-site cable termination.
The cable features an unshielded, black polyurethane (PUR) construction with a halogen-free outer sheath. Designed for industrial use, it offers resistance to oils, chemicals, UV radiation, hydrolysis and microbial exposure. With IP67 connector protection when correctly mated, the assembly is a practical choice for machine building, factory automation and industrial maintenance.
Industrial automation systems depend on dependable connections between sensors, actuators, distributed I/O modules and control equipment. The WAGO 756-5404/050-010 provides a standardised 5-pole M12 A-coded female-to-male connection, helping machine builders and maintenance engineers connect compatible devices using a factory-assembled cable.
Its defining feature is the use of 90° angled M12 connectors at both ends. This configuration is particularly useful where sensors, actuators or control modules are installed close to machine frames, enclosure walls or neighbouring components. Each angled connector allows the cable to leave its connection point at a right angle, reducing the clearance required compared with a straight connector.
The 1 m cable length is well suited to short connections between nearby automation components. This helps keep cable runs compact and organised while reducing unnecessary slack. Factory-assembled connectors also simplify installation, maintenance and replacement.
The cable uses five 0.34 mm² conductors, identified by brown, white, blue, black and grey insulation. Its unshielded construction is suitable for compatible applications where additional electromagnetic shielding is not specified. Connector coding, pin assignments and electrical requirements should always be checked before installation.
The black PUR outer sheath offers resistance to oils, chemicals, UV radiation, hydrolysis and microbial exposure. WAGO also specifies the cable as suitable for drag-chain applications, provided that the installation complies with the manufacturer's mechanical and bending requirements.
Both M12 connectors provide IP67 protection when correctly mated to compatible counterparts. This helps protect the electrical interfaces against dust and temporary water immersion, but the rating does not apply to disconnected or improperly sealed connections.
| Type of electrical connection, field-sided | M12 |
|---|---|
| Type of electrical connection, box-sided | M12 |
| Positioning cable feed, box-sided | Angled |
| Number of poles | 5 |
| Positioning cable feed, field-sided | Angled |
| Rated current In | 4 A |
| Type of plug-in contact, box-sided | Male (plug) |
| Cable length | 1 m |
| Material of contact surface | Other |
| Rated voltage | 50 V |
| Degree of protection (IP) | IP67 |
| Type of plug-in contact, field sided | Female (bus) |
| Continuity resistance | 10 mOhm |
| Permitted cable outer temperature after assembling without vibration | -50 – 90 °C |
| Material contact body | CuSn |
| Material of cable sheath | Polyurethane (PUR) |
| Colour cable sheath | Black |
| Permitted cable outer temperature during assembling/handling | -25 – 90 °C |
| Manufacturer | WAGO |
| Manufacturer part number | 756-5404/050-010 |
| Product series | 756 |
| Product category | Industrial sensor/actuator cable |
| Connection configuration | M12 female socket to M12 male plug |
| Connector 1 | M12 A-coded female socket, angled |
| Connector 2 | M12 A-coded male plug, angled |
| Female connector orientation | 90° |
| Male connector orientation | 90° |
| Nominal cable length | 1 m |
| Rated current | 4 A |
| Protection rating | IP67 when correctly mated |
| Shielding | Unshielded |
| Cable type | Round, multi-core |
| Outer sheath material | PUR (polyurethane) |
| Outer sheath colour | Black |
| Nominal cable diameter | 5.0 mm ±0.2 mm |
| Conductor cross-section | 0.34 mm² |
| Conductor identification | Brown, white, blue, black and grey |
| Halogen-free | Yes |
| Drag-chain suitability | Yes, subject to manufacturer installation requirements |
| Oil resistance | Yes |
| Chemical resistance | Yes |
| UV resistance | Yes |
| Hydrolysis resistance | Yes |
| Microbial resistance | Yes |
| Cable listing | UL-listed cable |
| Product weight | 55 g |
| EAN / GTIN | 4044918975674 |
| Termination | Factory-assembled M12 connectors at both ends |
The WAGO 756-5404/050-010 is a pre-assembled industrial sensor/actuator cable used to connect or extend compatible M12 field-device connections. It features a 90° angled 5-pole M12 A-coded female socket at one end and a 90° angled male plug at the other.
The cable has a nominal length of 1 m and features 90° angled M12 A-coded connectors at both ends. One connector is a 5-pole female socket and the other is a 5-pole male plug. Both are factory-assembled.
No. The WAGO 756-5404/050-010 is an unshielded cable assembly. It is intended for compatible sensor and actuator applications where additional electromagnetic shielding is not required. If shielding is specified, a suitable shielded cable variant should be selected.
The cable has a 4 A current rating and its M12 connector interfaces provide IP67 protection when correctly mated. The complete installation must remain within the applicable electrical and environmental ratings of the cable, connectors and connected equipment.
Yes. The cable features a halogen-free black PUR outer sheath with resistance to oils, chemicals, UV radiation, hydrolysis and microbes. It is also suitable for drag-chain applications when installed within the manufacturer's specified mechanical limits.
WAGO industrial connection technology supports dependable field-device wiring in machine building, manufacturing and distributed automation systems. The WAGO 756-5404/050-010 combines dual 90° angled 5-pole M12 A-coded connectors, a durable 1 m PUR cable and factory-assembled terminations to provide a compact connection solution for compatible industrial sensors, actuators and control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.